Bedienungsanleitung Whirlpool HSCX 10432 - 6TH SENSE Supreme Care (Seite 14 von 44) (Englisch)

641519

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

mum 180 minutes (three hours).

Make sure that the Drying time button lights

up.

Turn the knob to select the desired drying /

airing time. Conrm it by pressing the knob.

Set dryness level, if needed

If you want to change the dryness level, make

sure that the Dryness level button « lights up.

Turn the knob to select the desired dryness

level, afterwards press the knob to conrm.

Select options, if needed

If you want to select additional options,

make sure that the Options button « lights

up. The options which are selectable for your

programme are indicated by a lighting arrow.

Turn the knob to select the desired options.

The symbol of the selected option blinks. To

conrm it, press the knob.

Some options / functions can be selected by

directly pressing the button.

Refer to section OPTIONS, FUNCTIONS

AND INDICATORS for more information.

INDIVIDUAL MODE

After you have switched on the dryer, you are

not forced to follow the GUIDED MODE.

It is up to you which order you choose to set

your programme. To do a setting, rst press

the relevant button, then turn the knob to

select, and nally press the knob to conrm.

The variety of options and dryness levels

depends on the programme selected.

Therefore it is recommended to start your

setting with selecting the programme.

5. START PROGRAMME

Press and hold Start/Pause « until the button

lights up solidly; the programme starts.

The duration can be recalculated and

adapted in the course of the programme.

During such phases, an animation occurs on

the display.

6. CHANGE THE SETTINGS OF A

RUNNING PROGRAMME, IF NEEDED

You can still change some settings after a

programme was started:

• Adjust drying time (only if programme

Drying time or Airing is selected)

• Adjust or cancel Finish in, if a delay was

selected and started

• Add or cancel an option, provided the

progress of the programme still allows it.

Press the relevant button. The selected

setting will blink for a few seconds.

While blinking, you can adjust the setting

by turning the knob. If the value or setting

stopped blinking, press the button again.

Press the knob to conrm the modication.

If you do not conrm, the modication will

be conrmed automatically — the modied

setting will stop blinking.

The programme will continue automatically.

To change the settings of a running

programme or delay, you can also:

• press Start/Pause to put the running

programme on pause

• change your settings

• press Start/Pause again to continue the

programme.

7. CANCEL A RUNNING PROGRAMME, IF

NEEDED

Press and hold the On/O button « until the

display indicates that the programme is

cancelled.

WARNING

After cancelling a running programme,

quickly remove all items and spread

them out so that the heat is dissipated.

8. SWITCH OFF THE DRYER AFTER

PROGRAMME END

The display indicates that the cycle has

nished. Press On/O button « to switch o

the dryer. Open the door and take out your

laundry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool HSCX 10432 - 6TH SENSE Supreme Care Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool HSCX 10432 - 6TH SENSE Supreme Care

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info