Bedienungsanleitung XtremeMac Luna (Seite 9 von 13) (Englisch)

496940

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

LUNA™ User Manual

To Preview Alarm Settings:

Luna features an alarm preview which allows you to hear and see all of your

set alarm options – audio source, volume and volume ramping, and dimmer

settings. This way you have no surprises in the morning!

1. Push the Right Control Knob to access the main menu. The menu will

appear on Luna’s display.

2. Turn the Right Control Knob to highlight either “Alarm 1” or “Alarm 2”

and push to select.

3. Turn the Right Control Knob until the “Preview” menu item is highlighted

and push to select. Luna will then let you preview all of your alarm

settings, including source, volume/ramping and dimmer.

4. Preview will last for 30 seconds and then time out. To end preview, press

the Right Control Knob.

Alarm Operation

1. Set the alarm time and options following the instructions in “SETTING

THE ALARMS”

2. Push the Alarm 1 Button on the back left to activate/deactivate Alarm 1

and/or push the Alarm 2 Button on the back right to activate/deactivate

Alarm 2. The display will show each alarm time and source icon when

activated.

3. When the alarm is sounding, the alarm time and source icon will ﬂash.

You can snooze, reset the alarm for the next day, or turn the alarm

completely off.

4. Push the Left Control Knob to snooze. Your alarm settings allow you to

set the snooze time in advance, but the snooze time can be adjusted

when in snooze mode by turning the Left Control Knob.

5. Push the Right Control Knob to silence the alarm and reset it to come on

again the following day .

6. To stop the alarm from sounding on the following day, push the

corresponding Alarm On/Off Button. This will turn the alarm OFF. The

alarm time and source icon will not appear in the display.

7. If the alarm is not turned off after it sounds it will play for approximately

one hour and then turn off automatically. The alarm will reset for the

following day unless you turn the alarm off.

Listening to Audio

Many of the functions can be controlled by the included remote control.

Please review the “REMOTE CONTROL” section on pages 10-11 to learn

more about using the remote.

Listening to Your iPod:

1. Select the correct insert and dock your iPod (see “Universal Dock Well”

on page 7).

2. Push the Left Control Knob to toggle through source options until “iPod”

appears in the display.

3. Press play on your iPod.

4. Turn the Left Control Knob to increase/decrease the volume.

Note: If you have a iPod without a dock connector, please follow the

instructions for “Listening to an Auxiliary Source” below.

Listening to the Radio:

1. Push the Left Control Knob to toggle through source options until “FM”

or “AM” appears in the display. The frequency will blink to indicate that it

can be adjusted.

2. Turn the Right Control Knob to tune to the desired frequency and push to

select.

3. Turn the Left Control Knob to increase/decrease the volume.

4. To select a new station or a preset station, hold down the Left Control

Knob to access the Radio menu. Turn the right control knob to scroll

through the menu options – “Tune”, “Select Presets” and “Set Presets.”

5. When the desired menu item is highlighted, push the Right Control Knob

to select and follow the instructions below:

Tune

– The AM/FM band indicator will blink to indicate that it can be

adjusted. Turn the Right Control Knob to the desired band and

push to select. The frequency will then blink to indicate it can be

adjusted.

– Turn the Right Control Knob to tune the desired frequency and

push to accept.

Set Presets

– Turn the Right Control Knob until the desired preset number is

highlighted (presets 1 through 4) and push to select.

– The AM/FM band indicator will blink to indicate it can be adjusted.

Turn the Right Control Knob to the desired band and push to

select. The frequency will then blink to indicate that it can be

adjusted.

– Turn the Right Control Knob to tune the desired frequency and

push to accept.

– Repeat these steps to program remaining presets.

Select Presets

– Turn the Right Control Knob until the desired preset number is

highlighted (presets 1 through 4) and push to select.

Note: You can also access all radio functions though the main menu

under “Radio.”

Listening to an Auxiliary Source:

1. Connect the device to “AUX/LINE IN” jack on the back of Luna with an

auxiliary 3.5mm stereo audio cable (not included)

2. Push the Left Control Knob to toggle through source options until “AUX”

appears in the display.

3. Press play on the device.

4. Turn the Left Control Knob to increase/decrease the volume.

Adjusting Bass and Treble:

1. Push the Right Control Knob to access the main menu. The menu will

appear on Luna’s display.

2. Turn the Right Control Knob until the “Settings” menu item is highlighted

and push to select.

3. Turn the Right Control Knob until the “Audio” menu item is highlighted

and push to select.

4. Turn the Right Control Knob to highlight either “Bass” or “Treble” and

push to select. The level will blink to indicate that it can be adjusted.

5. Turn the Right Control Knob to increase/decrease the level (from -7 to 7)

and push to accept.

Note: It is recommended that you adjust the bass and treble while listening

to an audio source.

XtremeMac Luna Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info