Bedienungsanleitung Yamaha CLP-380 (Seite 4 von 9) (Englisch)

590676

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Accessory CD-ROM for Windows Installation Guide

English

Software Installation

•

USB-MIDI Driver

To operate the instrument from your computer via USB, you’ll

need to install the appropriate driver software.

The USB-MIDI driver is software that transfers MIDI data back and

forth between sequence software and the instrument via a USB cable.

For Windows XP: See the column at right.

For Windows 2000: See page 5.

For Windows Vista: See page 5.

See the Yamaha Download page at the following URL for up-to-date

news on USB-MIDI driver:

http://music.yamaha.com/download/

 Installing the driver on Windows XP

1 Start the computer and use the “Administrator” account

to log on to Windows XP.

2 Select [Start] → [Control Panel].

If the control panel appears as “Pick a category”, click

“Switch to Classic View” in the upper left of the window.

All control panels and icons will be displayed.

Go to [System] → [Hardware] → [Driver Signing

Options] and check the radio button to the left of

“Ignore” and click [OK].

4 Click the [OK] button to close System Properties, and

then click “X” in the upper right of the window to close

the Control Panel.

5 Insert the included CD-ROM into the CD-ROM drive.

The Start window will appear automatically.

6 First, make sure the POWER switch on the instrument is set

to OFF, then use a USB cable to connect the USB connector of

the computer to the USB TO HOST connector of the

instrument. When the instrument is turned on, the computer

automatically displays the “Found New Hardware Wizard.”

If the Wizard window is not displayed automatically, refer to

“Troubleshooting.”

If the system displays “Found New Hardware” in the lower right

corner, wait until “Found New Hardware Wizard” is displayed. (The

Wizard window may take a while to display on some computers.)

If the Wizard window prompts you to specify whether or not

to connect to Windows Update, select the radio button for

“No, not this time,” then click [Next].

7 Check the radio button to the left of “Install the

software automatically (Recommended).” Click [Next].

The system starts the installation.

n If during the installation the system displays “...has not passed

Windows Logo testing to verify its compatibility with Windows

XP,” click [Continue Anyway].

8 When the installation is complete, the system displays

“Completing the Found New Hardware Wizard.” Click [Finish].

(The Wizard window may take a while to display on some computers.)

9 Restart the computer.

If the system displays “Found New Hardware” in the lower right

corner, wait until “System Settings Change” is displayed. (The

Wizard window may take a while to display on some computers.)

n This Wizard window will not appear when using Windows XP

Professional x64 Edition. There is no need to restart the computer.

) When using Windows XP Professional x64 Edition, the

Support Module must be installed.

After installing the USB-MIDI drivers for all the connected

USB devices, select “My Computer” from the Start menu.

Right-click the CD-ROM icon and select “Open” from the pop-

up menu. Select “USBdrvVista_”

→ “XPx64SupportModule”

→ “Setup.exe” and launch “Setup.exe.” Follow the on-screen

directions.

n Once the Support Module is installed, this step is not necessary,

even if you’ve connected a new USB device or updated the USB-

MIDI driver.

The USB-MIDI driver installation is complete.

Uninstall (Removing the installed application)

To remove any installed application software:

Select [START] → [Settings] → [Control Panel] → [Add/

Remove Programs] → [Install/Uninstall], then select the

application to be removed and click [Add/Remove...].

Follow the on-screen instructions to uninstall the

application.

n The button names or menus may differ depending on the

computer OS.

n For instructions on uninstalling the USB-MIDI driver, refer to

“How can I remove the driver?” in the “Troubleshooting”

section (page 7).

Check the drive name of the CD-ROM drive you will be using

(D:, E:, Q:, etc.) The drive name is displayed beside the CD-

ROM icon in your “My Computer” folder. The root directory

of the CD-ROM drive will be D:\ , E:\ , or Q:\ , respectively.

Computer

MIDI instrument (Clavinova, etc.)

USB cable

Driver

Sequence

Software

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-380 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info