Bedienungsanleitung Zelmer 481 (Seite 75 von 78) (Englisch, Polnisch)

539098

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

481-017_v01

Turn the control clamp to the limit in such a way that the

hand is positioned vertically.

Press the fastener button and simultaneously deect the

stand head with the motor part back.

Before putting the ingredients into the steel bowl (type

481.64MM only), attach the toothed wheel plastic rim to the

bowl until it sits in the recess.

Then twist it in the direction marked on the rim until it stops.

Place the bowl on the 3 lips of the stand and put it on the

stand base.

Attach the bowl scraper attachment and put ingredients

into the bowl.

Place the stand head with the motor part in horizontal

position (you will hear the clicking sound of fastener blocking

clamps).

Start-up the mixer with the switch lever and it will make

the bowl turn and the head with drive move pendulum-like.

Never block or stop the oscillatory movement

during operation. It may cause damage to the

housing.

Before emptying the metal bowl, take away

toothed wheel. Removing toothed wheel

facilitates emptying and cleaning of the product.

Working with a stand with scales

Food mixer type 481.67 has the base, which is equipped with

rotating bowl and inbuilt electronic scales, which is an

innovative solution. The base with installed motor makes

the work with whiskers or stirrers easier, so that the user

has „free” hands, whereas the assembled scales enable for

weighting of processed products directly in the base bowl.

The base with the scales is equipped with the scraper blade

and the blade.

Equipment of the blender type 481.67 is

identical to type 481.7 – see table (B); the

additional equipment is a stand with scales,

which should be operated according to this

instruction manual.

The base with scales is equipped with safety blocking,

which prevents the damages of the scales sensor, it is

started by blocking knob.

The positions of blocking knob:

OFF – the scales sensor blocked and the scales switched

off – it is possible to start the motor on the base.

ON – the scales sensor unblocked and the scales

switched on – it is possible to weight but it is not

allowed to start the motor on the base.

Operating the stand with scales in terms of

cooperation with the drive, mixers, beaters,

rotating bowl and self-gathering spatula is

identical to these actions concerning a stand

without scales, as described in the above

subsections.

Installing the motor on the base with scales,

exchange of accessories and starting te driver

is allowed only when the blocking knob is set

in OFF.

Scales operation

Specication of the scales:

The scope of weighting 3 kg

The measurement accuracy

of the scales +/- 1 g

Power 3V – two batteries 1,5 V,

alkaline, type AA (LR6)

Inserting (replacing) of batteries (Fig. I)

To provide the power supply of the scales it is necessary

●

to use alkaline batteries 1,5 V, type AA (LR6).

To insert or replace the batteries:

Turn the blocking knob to OFF position.

Remove the motor from the base.

Turn the base with scales upside down and remove the

cover of the batteries bending its fastening with screwdriver

or a coin (according to the arrow on the cover),

Insert new batteries paying attention to the polarity (+/-).

Replace the cover of the batteries.

The display and the scales keypad

The symbols show on the scales display and the functions of

the buttons are presented in the gure

Display

●

- – negative value

g – grams

kg – kilograms

lb – pounds

TARE – tare

ON/OFF – the button to switch the scales off and on

●

Tarring knob TARE

●

Unit change button UNIT

●

Weighting (Fig. L)

Place the base with the scales and rotating bowl on rm

and at surface.

Switch off the motor. Place the supplying cord of the

motor so, that it does not inuence the result of weighting.

The head of the base with the motor should be put into lower

position during weighting (in order to limit the inuence of

vibrations on the result of weighting).

Turn the blocking knob to ON position, to unblock the

scales and switch it on. In case the blocking knob is in ON

position and the scales is off, it is enough to press the ON/

OFF button (next to the display).

Wait until symbol „ ” appears on the display.

Select a desired weighting unit with UNIT knob, when

pressing consequently the units „g”, „kg”, „lb” are displayed.

The button of unit change UNIT makes possible to weight

in metric system (g, kg) and in English system (lb) and it

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 481 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info