Bedienungsanleitung Zelmer Solaris 5000.0 HQ (Seite 47 von 50) (Englisch, Polnisch)

539689

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

5000-017_v02

Remove the inlet lter from the inlet lter casing.

Insert a new lter into the inlet lter casing (25) with the

fabric side directed towards the casing inner, take care that

the lter edges exactly adhere to the lter casing.

Slide the inlet lter casing (25) together with the lter in

the tracks until stop to the previous position.

 Always replace a damaged inlet lter with

abrandnew,originalone.

Insert the SAFBAG dust bag module to the vacuum

●

cleaner chamber. Close the cover by pressing it until you

hear a characteristic click – pay attention not to trap the

dust bag.

HEPA OUTLET FILTER

The vacuum cleaners are equipped with a HEPA (High

Efciency Particulate Air) H11, H13 outlet lter.

The lters have a high ltration capacity; they are made of

special bers which are able to retain almost all dust particles.

The H11 and H13 classes determine the permeability of

a given lter: H11 lter retains 95.5% of particles with the

size of 0.3 micron and H13 lter retains as much as 99.95%

of all pollutants.

The HEPA outlet lter shall be replaced, when the lter

surface is dirty or the outlet lter exchange indicator light is

on (14) (pulsating red colour). The sound alarm for the outlet

lter exchange, so-called “Buzzer”, is on simultaneously with

the outlet lter exchange indicator light, also the vacuum

cleaner suction power is reduced (setting 1).

In order to exchange HEPA lter lift the vacuum cleaner

handle. Next, catch two protruding fasteners of the outlet

lter cover (1) pull strong the outlet lter cover with your

thumbs and lift it up. Slide the outlet lter cover out of the

vacuum cleaner.

Remove the HEPA lter case and replace it with a new

one. The HEPA lter ensures an effective operation of the

vacuum cleaner for about 1 year.

Insert the cover so that the two protrusions in the lower

part of the cover are inserted in the openings of the vacuum

cleaner body, press the lter cover so that the rear fastenings

snap shot on the body.

ACOUSTIC FOAM

In order to clean the acoustic foam (24) lift the vacuum

cleaner handle. Next, catch two protruding fasteners of the

outlet lter cover (1) pull strong the outlet lter cover (1) with

your thumbs and lift it up.

Slide the outlet lter cover (1) out of the vacuum cleaner.

Turn it and then remove the acoustic foam (24) out of the cover.

Has the acoustic foam (24) got dirty; it is possible to

rinse it under running water. Remember to dry the foam well

before reassembling.

 It is absolutely not allowed to assemble not

completely dry acoustic foam in respect of

safetyreasons.

Insert the rinsed acoustic foam (24) into previous

position. Insert the cover, so that the two protrusions located

in the bottom part of the cover, are directed into the holes in

the vacuum cleaner casing, press the outlet lter cover (1),

so that the hind fasteners get locked in the casing.

SAFBAG dust bag disassembly/assembly

The vacuum cleaner is equipped with a safety valve

which is located in the dust container (bag) chamber.

It opens automatically when the suction hose or the elements

attached to the suction hose are completely clogged or when

the dust bag is overlled with dust. After the opening of the

valve a characteristic "uttering" in the vacuum cleaner will

be heard. The opening of the safety valve will result in the

lighting of the dust bag full indicator.

When the dust bag full indicator (10) lights (with the

nozzle or the brush lifted above the cleaned surface) it means

that the bag is full and needs to be replaced. In addition the

dust bag full indicator may activate if the suction hose or the

elements attached to the suction hose are clogged.

Switch off the vacuum cleaner by pressing the on/off

button (7) and unplug the appliance.

Press the two side buttons on the end of the hose and

remove the hose end from the inlet opening of the vacuum

cleaner.

Release the front cover fastening (15) and open the

cover.

Remove the SAFBAG dust bag module from the vacuum

cleaner chamber (22).

Shut the SAFBAG bag cover in order to cover the hole of

the soiled bag. While holding the bag plate, bend it upwards

and pull the bag out of the bag catch, guides.

Insert the plate of the new dust bag in the tracks of the

SAFBAG dust bag module (22) and slide it until stop. The

direction for inserting the dust bag is indicated by the arrow

on the bag.

Slide the SAFBAG dust bag module together with the

●

installed bag in the tracks located on the side of the

vacuum cleaner chamber. Close the cover by pressing it

until you hear a characteristic click – pay attention not to

trap the dust bag.

 DonotvacuumwithouttheSAFBAGdustbag

moduleinstalledintheappliance.Thelackof

the SAFBAG dust bag module prevents from

lockingtheuppercoveroftheappliance.

ZELMER vacuum cleaners are equipped with SAFBAG dust

bags in the amount indicated in the table. It is recommended

to replace the dust bag if:

a) the dust bag full indicator lights up,

b) the safety valve activates,

c) the vacuum cleaner operates poorly,

d) the dust bag is full.

Zelmer Solaris 5000.0 HQ Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info