Bedienungsanleitung Zvox AccuVoice AV200 (Seite 6 von 8) (Englisch)

792422

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

6 ZVOX AccuVoice TV Speaker | Setup & Operation

Surround Settings

There are three SURROUND levels:

• Surround One (“Sd 1”) has low virtual surround

effect and strong vocals. Use this setting if vocal

clarity is important to you.

• Surround Two (“Sd 2”) has moderate virtual

surround effect and moderate vocals. This is the

recommended setting for general TV programs.

• Surround Three (“Sd 3”) has strong virtual

surround effect and moderate vocals. Many

people prefer this setting when watching movies.

Controlling the AccuVoice TV Speaker With Another Remote

The AccuVoice TV speaker can learn to respond to your preferred TV remote

for Volume, Mute and Power. Visit www.zvoxaudio.com to read or download

instructions for this feature.

The supplied ZVOX remote controls all functions of the ZVOX speaker, even if

another remote is also used to control volume on the ZVOX speaker.

AccuVoice

Press the AccuVoice button to set the AccuVoice function. Additional

presses of the AccuVoice button allow you to set Increased levels of voice

enhancement. There are two levels, AC 1 and AC 2. The setting you select

remains the default AccuVoice setting until you decide to change it.

On the viewer’s right end of the ZVOX speaker are four buttons.

A) POWER button:

This button turns the ZVOX speaker “ON” if it is in Standby. If this button is

pressed briey while the ZVOX speaker is “ON”, it will mute and unmute the

sound. To turn off the ZVOX speaker, press and hold down this button for about

ve seconds.

B) Volume Up/Down rocker button

Adjusts volume up and down. Pressing either side of this button will “unmute” the

ZVOX speaker if it is muted.

C) Input button:

A brief press of the INPUT button changes the input.

End Panel Controls on the

AccuVoice TV Speaker

Other Settings Button

The Other Settings button allows Bass and Treble adjustment and turns Output

Leveling On and Off.

1) Bass Adjustment: The rst press of the Other Settings button displays

the current Bass setting. The range of bass adjustment goes from LO 4 to

LO-6 (This display is shorthand for Lows plus 4 and Lows minus 6). Use the

volume buttons to adjust the bass output across this range. Then wait for the

adjustment display to turn off.

2) Treble Adjustment: A second press of the Other Settings button displays

the current Treble setting. The range of treble adjustment is HI 4 to HI-4. That

is short hand for Highs plus 4 and Highs minus 4. Use the volume buttons to

adjust the bass output across this range. Then wait for the adjustment display

to turn off.

3) Output Leveling: A third press of the Other Settings button displays the

Output Leveling feature. The display will be either OL (Output Leveling engaged)

or noOL (Output Leveling off). Use the volume buttons to toggle the Output

Leveling feature on or off. Then wait for the adjustment display to turn off.

When engaged, Output Leveling prevents large swings in volume. It also reduces

volume differences between TV channels on cable or satellite systems.

A fourth press of the Other Settings button returns you to the current volume

setting and exits Other Settings adjustment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zvox AccuVoice AV200 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zvox AccuVoice AV200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info