638708
8
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
OPERATION
OPERATION
SETTING THE TIMER
Press button TIMER to activate the timer
operation mode. Each time the TIMER button
is pressed, one of the three types of operation
modes will appear on the LCD display.
Timer setting will not change until new setting is
input.
A) HOW TO SET THE ON TIME
1. Press the TIMER button
to select the desired
timer.
2. Press the SET button till
the ON sign blinks.
3. Press the + or - (HOUR)
button until the desired
value is displayed.
4. Press the SET button to
activate the timer.
B) HOW TO SET THE OFF TIME
1. Press the TIMER button to select the desired
timer.
2. Press the SET button till the OFF sign blinks.
3. Press the + or - (HOUR) button until the
desired value is displayed.
4. Press the SET button to activate the timer.
C) HOW TO SET A PROGRAM FOR DAILY ON/
OFF OPERATION
1. Press the TIMER button to select the desired
timer.
2. Press the SET button till the ON sign blinks.
3. Press the + or - (HOUR) button until the
desired value is displayed.
4. Press the SET button again, the OFF sign
blinks.
5. Press the + or - (HOUR) button until the
desired value is displayed.
6. Press the SET button to activate the timer.
TIMER
IFEEL
SLEEP
SET
CLEAR
ROOM
MODE
HOUR
TEMP
LOCK FUNCTION
By pressing LOCK button, the remote control
will lock the last operation program. All the
function buttons will be inoperative, including
START/STOP button. By pressing LOCK button
again the remote control will be released from its
locked position. When lock mode is functioning,
the transmission sign will be on.
NOTE
Room temperature range is between 6 and 36
in 1 increments. Display should show "HI" or
"LO" to represent temperature that is above
36 or below 6.
ROOM TEMP FUNCTION OPERATION
Press the ROOM button to show the actual room
temperature around the remote control unit.
The measured room temperature and the room
temperature sign will be displayed.
To cancel the ROOM Temperature display press
on one of the following:
Press again on ROOM Temperature button.
Change of MODE button.
I FEEL TEMP FUNCTION OPERATION
Press button IFEEL to activate the IFEEL
function. Thermometer sign will appear on the
LCD operation display . Select suitable
temperature setting. Make sure that the remote
control unit is aimed at the air conditioner, with
the IFEEL sensor in front. Prevent the IFEEL
sensor from being affected by heat sources such
as lamps, heaters, direct sun, etc. or from being
directly affected by the air conditioner air flow.
These may cause the sensor to transmit the
wrong temperature data, thereby disturbing the
performance of the IFEEL function.
7
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Airwell RC3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Airwell RC3

Airwell RC3 Bedienungsanleitung - Deutsch - 9 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info