Bedienungsanleitung Casio 5347 - OCW-S3001 (Seite 4 von 7) (Englisch)

624834

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Operation Guide 5347 (OC)

E-24

General Guide

Pull out the crown to the ﬁ rst click and then rotate it to navigate between modes. Push the crown back in

after entering the mode you want.

x Pulling out the crown to the ﬁ rst click and then holding down B for at least two seconds will return

directly to the Timekeeping Mode.

Timekeeping Mode



x Start

x Stop

x Reset

Crown

Day Indicator

World Time Minute Hand

World Time Hour Hand

Minute Hand

Day of the Week

Hour Hand

Stopwatch

Second Hand

Stopwatch Minute Hand

(Up to 60 minutes: ﬁ ve

12-minute revolutions)

Second Hand

A button

x Press once to start an

elapsed time operation.

B button

x Pressing once while the

Second Hand is indicating

normal timekeeping will

cause the

Second Hand to

move to A (a.m.) or P (p.m.)

for about one second.

x After last signal receive result

is indicated (page E-19), the

Second Hand returns to

normal timekeeping.

Pull out the crown to the ﬁ rst click.

E-25

Stopwatch Mode



x Start

x Stop

x Reset

Crown

Minute HandHour Hand

Stopwatch Second Hand

Points to ST.

World Time Hour Hand

World Time Minute Hand

Stopwatch Minute Hand

(0 to 60 minutes)

Stopwatch 1/20 (0.05) Second Hand

World Time Mode



x Start

x Stop

x Reset

Crown

World Time Day

Indicator

World Time

Minute Hand

Stopwatch Minute Hand (Up to 60 minutes:

ﬁ ve 12-minute revolutions)

Stopwatch Second Hand

World Time

Second Hand

Points to WT.

World Time

Hour Hand

Minute Hand

A button

x Press once to start an elapsed time

operation.

B button

x Pressing once while the

Second

Hand is indicating normal

timekeeping will cause the

Second

Hand to move to A (a.m.) or P (p.m.)

for about one second.

x After last signal receive result is

indicated (page E-19), the

Second

Hand returns to normal timekeeping.

E-26

Using the Stopwatch

x Perform this operation in any mode.

A A A B

Start Stop Resume Stop Reset

Note

x As the

Day Indicator changes after you switch between the Timekeeping Mode and World Time

Mode, the

Mode Hand also rotates (page E-2).

x The

Day Indicator changes gradually at midnight each day. It take anywhere from about 90 seconds

to three minutes for the day to change.

E-27

Watch Modes

Timekeeping Mode

(Crown pulled out to ﬁ rst click.)

World Time Mode Stopwatch Mode

In upper dial

In lower dial

In upper dial

In lower dial

In upper dial

In lower dial

x The day of the week is indicated in the Timekeeping Mode. Pulling out the crown to the ﬁ rst click will

cause the Mode Hand to move to TM. The mode indicators to the left and right of the Mode Hand

indicate the upper and lower dial hand functions: ST (Stopwatch) for the upper dial and WT (World

Time) for the lower dial.

x In the World Time Mode, the Mode Hand points to WT. The mode indicators to the left and right

indicate the upper and lower dial hand functions: TM (Timekeeping) for the upper dial and ST

(Stopwatch) for the lower dial.

x In the Stopwatch Mode, the Mode Hand points to ST. The mode indicators to the left and right indicate

the upper and lower dial hand functions: WT (World Time) for the upper dial and TM (Timekeeping) for

the lower dial.

E-28

Selecting a City

Your watch lets you select from among city codes for 29 cities around the globe, plus one code for

UTC (Universal Coordinated Time). Selecting a city code causes the watch’s time setting to change

automatically to indicate the current time in that zone.

Important!

x You can use the same steps to select a city code in the Timekeeping mode and the World Time Mode.

x In the Timekeeping Mode, the city setting is the Home City, and in the World Time Mode, it is the World

Time City.

To select a city

Note

x This watch does not have a city code that corresponds to

Newfoundland.

1. Pull out the crown to the second click.

x This will cause the

Second Hand to move to the city code of

the currently selected city.

x This indicates the city code setting mode.

x Leaving the crown pulled out for more than two minutes without

performing any operation will automatically cause crown

operations to become disabled. If this happens, press the

crown back in, pull it out, and then start the operation over

again.

x For details about city codes, see the “City Code Table” at the

back of this manual.





Illustration shows Timekeeping Mode.

TYO (TOKYO)

E-29

2. Rotate the crown to move the

Second Hand to the city code

you want to select.

x Each time you select a city code, the

Hour Hand,

Minute

Hand,

Mode Hand, and

Day Indicator move to the current

time for that city code.

3. After the setting is way you want, push the crown back in.

x The day of the week and day will also be displayed in

accordance with the selected city code.



 

 

E-30

STD/DST Switching

You can select summer time or standard time independently for each city. The initial default setting for all

cities is AT (AUTO).

Normally you should use the AT (AUTO) setting because it automatically switches between summer time

and standard time. You should change the setting to STD (standard time) or DST (summer time) in the

following cases.

− When using the watch in a city not included in the City Code Table

− When the switching dates in your location are different from those shown in the City Code Table

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time.

Remember that not all countries or even local areas use Daylight Saving Time.

x Note that you cannot switch between STD (standard time) and DST (daylight saving time) while UTC*

is selected as the city code.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping. The reference point for

UTC is Greenwich, England.

E-31

To switch between standard time and summer time manually

1. Pull the crown out to the second click.

x The

Second Hand will move to the currently selected city code.

x Leaving the crown pulled out for more than two minutes without performing any operation will

automatically cause crown operations to become disabled. If this happens, press the crown back in,

pull it out, and then start the operation over again.

2. Press A.

x The

Second Hand will move to the currently selected summer time setting (see table below).

x After about two seconds, the

Second Hand will return to the city code setting.

x Be sure to perform step 3 within two seconds after you press A (while the

Second Hand is

indicating the summer time setting).

AT (AUTO)

The watch automatically switches between standard time and daylight saving time in

accordance with its calendar.

STD The watch always shows standard time.

DST The watch always shows daylight saving time.

3. Hold down A for about one second to cycle through the summer time settings as shown below.

AT (AUTO) STD DST

4. After the setting is way you want, push the crown back in.

Casio 5347 - OCW-S3001 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info