624834
6
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
Operation Guide 5347 (OC)
E-40
Hand/Day Adjustment Steps
For full details, see the procedure from page E-41 to E-43.
Pull crown out to second click.
2
Second Hand
3
Minute Hand
1
Hour Hand
4
Upper Dial Big Hand
5
Upper Dial Small Hand
8
Mode Hand
9
Day Indicator
B
B
B
B*
(Wait for at least six seconds until the
2
Second Hand moves to 12 o’clock.)
B
6
Lower Dial Big Hand
7
Lower Dial Small Hand
8
Mode Hand*
9
Day Indicator*
Auto Adjustment
Manual Adjustment
* Perform this operation only if you are unable to align the
8
Mode Hand and
9
Day Indicator using the
operation to the right.
x After completing adjustment, push the crown back in. Pushing the crown back in part way through
adjustment will return to the mode you started from, with any adjustments you made in effect.
E-41
To adjust the hand and day home positions
Important!
x You do not need to perform the procedure in this section if the watch is indicating the time and/or day
correctly.
1. Pull the crown out to the second click.
2. Keep B depressed for more than six seconds. This will cause the
2
Second Hand moves to
12 o’clock.
x After about one second, the
2
Second Hand moves to A (a.m.) or P (p.m.). After about six seconds,
the
2
Second Hand moves to 12 o’clock.
x Release B after the
2
Second Hand moves to 12 o’clock. At this time the watch will start automatic
adjustment of the
2
Second Hand,
3
Minute Hand, and
1
Hour Hand positions.
x Adjustment is complete when the
2
Second Hand,
3
Minute Hand, and
1
Hour Hand move to
12 o’clock.
3. Press B.
x The
2
Second Hand,
3
Minute Hand, and
1
Hour Hand will
move to 2 o’clock.
x The
4
Upper Dial Big Hand and
5
Upper Dial Small Hand will
move to 12 o’clock and stop there.
x If the
4
Upper Dial Big Hand and
5
Upper Dial Small Hand
do not align with 12 o’clock, rotate the crown to adjust them
so they do.
x You can use high-speed hand movement to perform this step.

E-42
4. Press B.
x The
6
Lower Dial Big Hand and
7
Lower Dial Small Hand will
move to 12 o’clock and stop there.
x If the
6
Lower Dial Big Hand and
7
Lower Dial Small Hand
do not align with 12 o’clock, rotate the crown to adjust them
so they do.
x You can use high-speed hand movement to perform this step.
5. Press B.
x Check if the
8
Mode Hand is stopped at 12 o’clock and the
9
Day Indicator indicates the day correctly.
x If the position of the
8
Mode Hand and/or
9
Day Indicator
is not correct, rotate the crown to adjust the
8
Mode Hand to
12 o’clock and the
9
Day Indicator so the day is in the center
of indicator window.
x You can use high-speed hand movement to perform this step.
x When you rotate the crown, there is a limit on the movement of
the
8
Mode Hand and
9
Day Indicator. The maximum range
of movement of the
8
Mode Hand is 180 degrees left and right.
The
9
Day Indicator can move just a little (page E-2).
x If you successfully align the
8
Mode Hand and
9
Day
Indicator, advance to step 7. If you are unable to align the
8
Mode Hand and
9
Day Indicator, go to step 6.



Day Indicator during home position
adjustment
E-43
6. Press B.
x Wait until the
8
Mode Hand stops at 12 o’clock and the
9
Day
Indicator stops at 1.
x The
8
Mode Hand may continue to rotate for as long as
30 minutes until the
9
Day Indicator stops at 1 (page E-2).
x If the
8
Mode Hand and/or
9
Day Indicator is not aligned
properly when they stop moving, rotate the crown to adjust
them so the
8
Mode Hand is at 12 o’clock and so 1 is in the
center of the
9
Day Indicator window.
x You can use high-speed hand and day movement to perform
this step.
7. Push the crown back in.
This exits the adjustment mode and returns to normal timekeeping.
Important!
x Leaving the crown pulled out for more than approximately 30 minutes without performing any operation
will automatically cause the adjustment operation to become disabled. If this happens, push the crown
back in and then pull it out to restart the above procedure from the beginning.
Pushing the crown in will return to the mode you started from in step 1 with the hands and/or day in
their newly adjusted positions.
E-44
Troubleshooting
Hand Movement and Position
I lost track of what mode the watch is in.
Refer to “Mode Reference Guide” (page E-22). To return directly to the Timekeeping Mode, pull out the crown
to the fi rst click hold down B for at least two seconds. To return to the Timekeeping Mode, push the
crown back in.
The
2
Second Hand is moving at two-second intervals.
Power may be low. Expose the watch to light until the
2
Second Hand starts moving normally, at one-
second intervals (page E-10).
The hands of the watch suddenly start moving at high speed, even when I do not perform any
operation.
This could be due to any one of the following causes. In all cases, the hand movement does not indicate
malfunction, and should stop shortly.
x The watch is recovering from a sleep state (page E-12).
x The time setting is being adjusted following a successful auto time calibration signal receive operation
(page E-13).
Hands suddenly stop moving. Button operation also is disabled.
The watch may be in the power recovery mode (page E-11). Do not perform any operation until the hands
return to their normal positions (in about 15 minutes). The hands should return to their correct positions when
normal operation returns. To help power recover, leave the watch in a location where it is exposed to light.
All hands are at 12 o’clock and nothing happens when I press any button.
The rechargeable battery is dead. Expose the watch to light to charge the battery and restore normal
operation.
E-45
The current time setting is off by hours.
x Your city setting may be wrong. Check your city setting and correct it, if necessary (page E-28).
The current time setting is off by one hour.
x If you are using the watch in an area where time calibration signal reception is possible, see “To select
a city” (page E-28).
x The period when summer time is applied in the location where you are using the watch may be
different from the period set for your currently selected city. Use the procedure under “To switch
between standard time and summer time manually” (page E-31) to switch from AT (AUTO) to STD (for
standard time) or DST (for summer time).
The hands and/or day indications are off.
This could indicate that the watch has been exposed to magnetism or strong impact, which has caused
problems with proper hand and day alignment. Adjust the watch’s hand and day home position alignment
(page E-39).
Data indication is correct, but it is not in the middle of the day indicator.
The date is in the process of changing. For information about how the date changes, see page E-2.
Charging
The watch does not resume operation after I expose it to light.
It can take quite a long time to charge the battery after the power level drops to Level 3 (page E-10). Continue
exposing the watch to light until the
2
Second Hand starts moving normally (at one-second intervals).
E-46
Time Calibration Signal
The information in this section applies only when LONDON (LON), PARIS (PAR), ATHENS (ATH),
HONOLULU (HNL), ANCHORAGE (ANC), LOS ANGELES (LAX), DENVER (DEN), CHICAGO (CHI),
NEW YORK (NYC), HONG KONG (HKG), or TOKYO (TYO) is selected as the city. You need to adjust
the current time manually when any other city is selected.
The
2
Second Hand indicates N (NO) when I check the result of the latest receive operation.
Possible Cause Remedy Page
x You are wearing or moving the watch, or
performing a button operation during the signal
receive operation.
x The watch is in an area with poor reception
conditions.
Keep the watch in an area where reception
conditions are good while the signal receive
operation is being performed.
E-16
You are in an area where signal reception is not
possible for some reason.
See “Approximate Reception Ranges”. E-14
The calibration signal is not being transmitted for
some reason.
x Check the website of the organization that
maintains the time calibration signal in your area
for information about its down times.
x Try again later.
The current time setting changes after I set it manually.
You may have the watch confi gured for Auto Receive of the time calibration signal (page E-17), which will
cause the time to be adjusted automatically according to your currently selected city. If this results in the
wrong time setting, check your city setting and correct it, if necessary (page E-28).
E-47
Auto Receive is not performed or I cannot perform Manual Receive.
Possible Cause Remedy Page
Your city setting is wrong. Check your city setting and correct it, if necessary.
E-13
E-28
Auto Receive is disabled because there is an
ongoing elapsed time operation.
Stop the ongoing stopwatch operation. E-36
The watch is in the Stopwatch Mode.
Change to the Timekeeping Mode. If you want to
perform signal reception in the World Time Mode,
enter the World Time Mode.
E-24
The Auto Receive function is turned off. Turn on Auto Receive. E-20
The crown is pulled out. Push the crown back in. E-3
There is not enough power for signal reception. Expose the watch to light to charge it. E-9
Signal reception is being performed successfully, but the time and/or day is wrong.
Possible Cause Remedy Page
Your city setting is wrong. Check your city setting and correct it, if necessary.
E-13
E-28
The watch may have been exposed to magnetism
or strong impact, which has caused problems with
proper hand and day alignment.
Adjust the watch’s hand and day home positions. E-39
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 5347 - OCW-S3001 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info