624834

Casio 5347 - OCW-S3001 Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
Operation Guide 5347 (OC)
E-32
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable to receive a time
calibration signal.
To change the current time and date setting manually
1. In the mode whose time and date setting you want to change
(Timekeeping Mode or World Time Mode), pull out the crown to
the second click.
x This will cause the
2
Second Hand to move to the city code of
the currently selected city.
x Leaving the crown pulled out for more than approximately
30 minutes without performing any operation will automatically
cause crown operations to become disabled. If this happens,
press the crown back in, pull it out, and then start the operation
over again.

Illustration shows Timekeeping Mode.
TYO (TOKYO)
E-33
2. Change the city setting and summer time setting, if you want.
x To change the city setting, perform step 2 under “To select a
city” (page E-28).
3. Hold down B for about one second. This will enter the time and
date setting mode.
x The
2
Second Hand will move to A (a.m.) or P (p.m.).
x In the following steps, each press of B cycles between
settings as shown below.
(About 1 second)
City Minute Hour
Day
B
Year
B
B
B
B
Month
B
4. Rotate the crown to adjust the minute setting.
x A high-speed movement feature (one full cycle maximum) is available when adjusting the hands.
See “Crown Operations” (page E-3).

E-34
5. Press B.
x The
1
Hour Hand will move slightly left and right to indicate the hour and day setting mode.
6. Rotate the crown to adjust the hour setting.
x The
2
Second Hand will move to A (a.m.) or P (p.m.).
x A high-speed movement feature (one full cycle maximum) is available when adjusting the hands.
See “Crown Operations” (page E-3).
7. Press B. This will enter the year setting mode.
x After the
2
Second Hand moves to the month, the
3
Minute Hand and
1
Hour Hand will move and
point to the year.
x
2
Second Hand: The month setting is confi gured in step 10, below.
8. Rotate the crown to adjust the year setting.
0
2
3
4
9
8
1
75
6
Setting the year (ones digit)
00
20
30
40
90
80
10
70 50
60
Setting the year (tens digit)
E-35
9. Press B to enter the month setting mode.
x The
2
Second Hand will perform one rotation and
stop at the current month setting.
10. Rotate the crown to adjust the month setting.
11. Press the B.
x The
8
Mode Hand will move slightly, indicating
the day setting mode.
12. Rotate the crown to adjust the day setting.
x The
8
Mode Hand will rotate along with the crown
rotation.
13. After the settings are the way you want, push the
crown back in to return to the mode you started
from in step 1.
x This causes timekeeping to resume with the
2
Second Hand starting from 12 o’clock.
x The day of the week indicated by the
8
Mode
Hand changes automatically in accordance with
the date (year, month, and day).
Note
x The watch’s built-in full automatic calendar makes allowances for different month lengths and leap
years. Once you set the date, there should be no reason to change it except after you have the
watch’s rechargeable battery replaced or after power drops to Level 3.
Dec
Nov
Feb
Mar
Apr
Oct
Sep
Aug
Jan
Jul May
Jun
Setting the month
E-36
Using the Stopwatch
This watch can be used as a stopwatch.
x Measurement is possible in the Stopwatch Mode, Timekeeping Mode, and World Time Mode.
x Measurement is 1/20 (0.05) second units.
x Measurement can be up to 59 minutes, 59.95 seconds (60 minutes total).
x Elapsed time measurement stops when the maximum limit is reached.
x In the Timekeeping Mode and World Time Mode, measured time display is up to 11 minutes,
59.95 seconds.
If measured time exceeds 11 minutes 59.95 seconds, switch to the Stopwatch Mode.
Stopwatch Mode
Example: When elapsed time is 20 minutes, 45.10 seconds
Hand Functions
1
1 Hour Hand: Indicates the stopwatch minute count
(1 revolution = 60 minutes).
2
2 Second Hand: Indicates the 1/20 (0.05)-second count during stopwatch
operation.
3
3 Minute Hand: Indicates the stopwatch seconds count.
8
8 Mode Hand: Points to ST.
x The watch face is marked with 0.05-second markers.

E-37
Timekeeping Mode
Example: When elapsed time is 3 minutes, 45.10 seconds
Hand Functions
2
2 Second Hand: Indicates the 1/20 (0.05)-second count.
4
4 Upper Dial Big Hand: Indicates the 1-second count.
5
5 Upper Dial Small Hand: Indicates the 1-minute count (up to 60 minutes: fi ve
12-minute revolutions).
8
8 Mode Hand: Points to the day of the week while elapsed time is in progress.
World Time Mode
Example: When elapsed time is 3 minutes, 45.10 seconds
Hand Functions
2
2 Second Hand: Indicates the 1/20 (0.05)-second count.
6
6 Lower Dial Big Hand: Indicates the 1-second count.
7
7 Lower Dial Small Hand: Indicates the 1-minute count (up to 60 minutes: fi ve
12-minute revolutions).
8
8 Mode Hand: Points to WT while elapsed time is in progress.


E-38
To measure elapsed time
A
A A A B
Start Stop Resume Stop Reset
x Pressing A without resetting the stopwatch will resume the elapsed time operation from where it was
last stopped.
Note
x The Stopwatch Mode can indicate elapsed time up to 59 minutes, 59.95 seconds. Elapsed time
measurement will stop automatically when the maximum time is reached.
x Pressing B will not perform a reset operation while the hands are moving to elapsed timekeeping.
x In the Stopwatch Mode, the
2
Second Hand indicates the 1/20 (0.05)-second count for the fi rst
30 seconds of a stopwatch elapsed time operation. The
2
Second Hand will jump to the current value
whenever A (Stop) is pressed.
x In the Timekeeping Mode and World Time Mode, the
2
Second Hand (1/20 (0.05) second) hand
returns to normal 1-second movement approximately 20 seconds after an elapsed time measurement
operation is started.
E-39
Adjusting the Hand and Day Home Positions
If the watch is exposed to strong magnetism or impact, it can cause its hands and/or the date to go out of
alignment. This can result in incorrect date and/or time indication even though a time calibration signal is
being received.
The watch automatically adjusts the
2
Second Hand,
3
Minute Hand, and
1
Hour Hand positions
periodically.
If you notice that the
4
Upper Dial Big Hand,
5
Upper Dial Small Hand,
6
Lower Dial Big Hand,
7
Lower Dial Small Hand,
8
Mode Hand, or
9
Day Indicator are not in the correct position, perform
manual adjustment.
Important!
x Performing hand position correction in either the Timekeeping Mode or World Time Mode will correct
the hand positions in all modes.
x You cannot correct the hand and day home positions while in the Stopwatch Mode.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 5347 - OCW-S3001 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info