Bedienungsanleitung Cateye CC-GL50 (Seite 2 von 41) (Englisch)

538691

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

How to install the

unit on your bicycle

Setting up the

computer

How to use the

computer

Setup of your PC

Uploading the

measurement data

Changing the

computer

conﬁguration

OthersIntroduction

Measurement using the ANT+ speed sensor and the GPS signal

For speed measurement, the speed can be calculated from the GPS signal, even if you do

not have the ANT+ speed sensor. When the speed signal from the ANT+ sensor is detected,

priority is given to the speed signal for measurement. The difference between the measure-

ment using the ANT+ speed sensor and that using the GPS signal is as follows.

Measurement using the GPS signal

Measurement using the

ANT+ speed sensor

Under mea-

surement

The unit may stop measurement or

may not display appropriate mea-

surements when the GPS signal

cannot be received due to locations

or environments while riding.

Accurate measurement can be

performed even in such locations or

environments where the GPS signal

cannot be received.

Measurement

results

The measurement results may differ

slightly from the actual value.

Highly reliable measurement values

can be obtained, since they are based

on wheel rotations.

* For GPS, see “GPS” (page 3).

ANT+ communication standards

ANT+ is low-power-consumption digital communication standards using frequency of 2.4GHz.

It practically prevents external noises and cross talks from interfering with measurement,

and enables to record and store more reliable data than before.

However, it suffers interference in the following places and/or environments, which may

result in an incorrect measurement.

* Be careful especially while pairing (i.e., searching the sensor ID).

• Near TVs, PCs, radios, motors, or in cars or trains.

• Near railroad crossings, along railway tracks, around television transmitting stations and

radar bases, etc.

• When using together with other wireless devices, or some particular battery lights.

• Under the Wi-Fi environment

Automatic recognition of the sensor ID

The ANT+ sensor has its own ID, and the computer measures in synchronization with the ID.

2 sensor IDs per sensor type can be registered into the computer. By pairing in advance, the

sensor is automatically recognized while riding. It is not necessary to change the tire circum-

ference manually, since the tire circumference is set for the speed sensor or speed/cadence

(ISC) sensor ID.

* The speed sensor or speed/cadence (ISC) sensor, whichever is recognized, is indicated by

the speed sensor icon (

, ) on the display.

Proper use of the CatEye STEALTH 50

Warning / Caution

• Do not concentrate on the computer while riding. Ride safely!

• Mount ﬁrmly the bracket on your bicycle, and check periodically that it is not loosened.

• Do not leave the computer in direct sunlight for a long period of time.

• Do not disassemble the computer.

• Do not drop the computer to avoid malfunction or damage.

• Be sure to tighten the dial of the FlexTight™ bracket by hand. Tightening it strongly using a

tool, etc. may damage the screw thread.

• When cleaning the computer and bracket, do not use thinners, benzene, or alcohol.

• LCD screen may be distorted when viewed through polarized sunglass lenses.

Cautions when measuring

Press and hold the

MODE

button to reset the computer before and after measurement.

Measuring starts by resetting the computer. The unit keeps recording the trip until it is

reset. Turn off the unit when not in use.

ANT+ sensor (optional or commercial)

This unit can receive, measure and display the signal from the following 4 ANT+ sensors.

• Speed sensor

• Speed/cadence (ISC) sensor

• Cadence sensor

* Heart rate sensor

• Power sensor

* For each type of sensor, you can perform pairing with up to 2 sensors.

* We offer an optional speed/cadence sensor (ISC-11), and heart rate sensor (HR-11).

* You can view applicable sensors on our website.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye CC-GL50 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye CC-GL50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info