Bedienungsanleitung DeWalt D712N T 3 (Seite 18 von 20) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546147

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

Cleaning

Before use, carefully check the upper blade guard, movable lower

blade guard as well as the dust extraction tube to determine that it will

operate properly. Ensure that chips, dust or workpiece particle cannot

lead to blockage of one of the functions.

In case of workpiece fragments jammed between saw blade and

guards disconnect the machine from the power supply and follow the

instructions given in section Mounting the Saw Blade. Remove the

jammed parts and reassemble the saw blade.

WARNING: Blow dirt and dust out of the main housing

with dry air as often as dirt is seen collecting in and around

the air vents. Wear approved eye protection and approved

dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals

for cleaning the non-metallic parts of the tool. These

chemicals may weaken the materials used in these parts.

Use a cloth dampened only with water and mild soap.

Never let any liquid get inside the tool; never immerse any

part of the tool into a liquid.

WARNING: To reduce the risk of injury, regularly clean

the table top.

WARNING: To reduce the risk of injury, regularly clean

the dust collection system.

CLEANING AND MAINTAINING THE KERF PLATE (FIG. U)

Regularly clean the area below the kerf plate.If the kerf plate is worn it

must be replaced.

• Remove the screws (67) holding the kerf plate (31).

• Remove the kerf plate and clean the area below.

• Re-install the parts of the kerf plate and the screws.

• Tighten the screws hand-tight.

• To adjust the kerf plate, proceed as follows:

• Pull down the head until the blade just enters the saw kerf.

• Adjust each part of the kerf plate to fit closely to the teeth of the

blade.

• Tighten the screws.

Optional Accessories

WARNING: Since accessories, other than those offered

by D

EWALT, have not been tested with this product, use

of such accessories with this tool could be hazardous.

To reduce the risk of injury, only DEWALT, recommended

accessories should be used with this product.

SAW BLADES

ALWAYS use 216mm saw blades with 30mm arbour holes. Blade

speed rating must be at least 5500 RPM. Never use a smaller or

greater blade diameter. It will not be guarded properly.

BLADE DESCRIPTIONS

APPLICATION DIAMETER TEETH

Construction Saw Blades (for all purpose cutting)

General Purpose 216mm 48

Woodworking Saw Blades (provide smooth, clean cuts)

Fine crosscuts 216mm 60

Consult your dealer for further information on the appropriate

accessories.

Protecting the Environment

Separate collection. This product must not be disposed of with

normal household waste.

Should you ﬁnd one day that your D

EWALT product needs replacement,

or if it is of no further use to you, do not dispose of it with household

waste. Make this product available for separate collection.

Separate collection of used products and packaging allows

materials to be recycled and used again. Re-use of

recycled materials helps prevent environmental pollution

and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical

products from the household, at municipal waste sites or by the retailer

when you purchase a new product.

EWALT provides a facility for the collection and recycling of DEWALT

products once they have reached the end of their working life. To take

advantage of this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by

contacting your local D

EWALT office at the address indicated in this

manual. Alternatively, a list of authorised DEWALT repair agents and

full details of our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

GUARANTEE

DEWALT is confident of the quality of its products and offers an

outstanding guarantee for professional users of the product. This

guarantee statement is in addition to and in no way prejudices

your contractual rights as a professional user or your statutory

rights as a private non-professional user. The guarantee is valid

within the territories of the Member States of the European Union

and the European Free Trade Area.

• 30 DAY NO RISK SATISFACTION GUARANTEE •

If you are not completely satisfied with the performance of your

EWALT tool, simply return it within 30 days, complete with all

original components, as purchased, to the point of purchase, for

a full refund or exchange. The product must have been subject to

fair wear and tear and proof of purchase must be produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your D

EWALT tool, in

the 12 months following purchase, you are entitled to one

service free of charge. It will be undertaken free of charge at an

authorised DEWALT repair agent. Proof of purchase must be

produced. Includes labour. Excludes accessories and spare parts

unless failed under warranty.

• ONE YEAR FULL WARRANTY •

If your D

EWALT product becomes defective due to faulty

materials or workmanship within 12 months from the date of

purchase, D

EWALT guarantees to replace all defective parts free

of charge or – at our discretion – replace the unit free of charge

provided that:

• The product has not been misused;

• The product has been subject to fair wear and tear;

• Repairs have not been attempted by unauthorised persons;

• Proof of purchase is produced;

• The product is returned complete with all original

components.

If you wish to make a claim, contact your seller or check the

location of your nearest authorised D

EWALT repair agent in the

EWALT catalogue or contact your DEWALT office at the address

indicated in this manual. A list of authorised DEWALT repair

agents and full details of our after-sales service is available on the

Internet at: www.2helpU.com.

DeWalt D712N T 3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info