Bedienungsanleitung Dremel DSM20 (Seite 12 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

488591

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

C. Abrasive wheel

D. Line guide

E. Foot

F. Flush cut foot

G. Spindle lock

H. Ventilation openings

I. Cord

J. Depth adjustment lever

K. Dust port

L. Depth scale

INSTALLING AND REMOVING ACCESSORIES

WARNING

DISCONNECT THE PLUG FROM THE

POWER SOURCE BEFORE MAKING ANY

ASSEMBLY, ADJUSTMENTS OR CHANGING ACCESSORIES. Such

preventive safety measures reduce the risk of starting the tool

accidentally.

Standard flat wheel assembly

1. Turn LOCK BOLT with wrench provided clockwise and

remove LOCK BOLT and OUTER WASHER. If the shaft

moves while attempting to loosen the lock bolt press the

spindle lock. PICTURE 2

2. Slide wheel behind the guard face and mount it against the

INNER WASHER on the shaft.

3. Reinstall OUTER WASHER and tighten lock bolt finger tight.

4. Press spindle lock to lock shaft and tighten LOCK BOLT

counter-clockwise until tight with the wrench provided. NOTE:

Be sure to read the instructions supplied with your Dremel

accessory for further information on its use.

PICTURE 2

A. Standard flat wheel

B. Flush cutting wheel (optional)

C. Standard flat wheel

D. Deburring stone (optional)

E. Wrench

F. Lock bolt

G. Outer washer

H. Guard face

I. Inner washer

J. Spindle lock

PICTURE 3

A. Standard wheel

B. Guard face

Flush cutting wheel assembly

1. Repeat step 1 of above.

2. Place flush cutting wheel against the INNER WASHER on the

spindle shaft. PICTURE 4

3. Reinstall OUTER WASHER and tighten LOCK BOLT finger

tight.

4. Press spindle lock to lock shaft and tighten LOCK BOLT

counter-clockwise until tight with the wrench provided.

PICTURE 4

A. Flush cutting wheel

Deburring stone assembly

1. Repeat step 1 of above.

2. Place flat wheel against the INNER WASHER on the spindle

shaft. PICTURE 5

3. Install DEBURRING STONE instead of outer washer and

tighten finger tight.

4. Press spindle lock to lock shaft and tighten DEBURRING

STONE counter-clockwise until tight with the wrench provided.

PICTURE 5

A. Standard wheel flat

B. Deburring stone

DUST EXTRACTION

Your tool is equipped with a dust port for dust extraction. To use

this feature, insert dust port adapter (optional accessory) into

dust port, attach vacuum hose into the adapter, then connect the

opposite end of the hose to a shop vacuum cleaner. PICTURE 6

PICTURE 6

A. Dust port

B. Dust port adapter (optional accessory)

C. Vacuum hose (not included)

USE

GETTING STARTED

Thank you for purchasing the Dremel DSM20. This tool was

designed to tackle a wide variety of projects in and around the

home. The Dremel DSM20 completes tasks quicker and more

efficiently than a series of other tools that would be needed to

complete a job or project. This tool is also compact, ergonomic,

and cuts virtually all common materials.

After using your new Dremel DSM20 you’ll find that it is the right

size tool to get projects done at just a fraction of the size of a

traditional circular saw. With a full line of accessories the tool cuts

through virtually any common material in the home- wood, plastic,

metal, drywall and tile. The tool also features two cutting wheel

positions, one position using a standard flat wheel for all your

typical straight cuts and a second position for making flush cuts

along flooring or against a wall.

In addition to versatility, the Dremel DSM20 provides excellent line

of sight for confident, precise cuts so you will get accurate cuts

the first attempt and avoid wasting time or material.

Visit www.dremel.com to learn more about what you can do with

your new Dremel tool.

WARNING

HOLD THE TOOL WITH BOTH HANDS

WHILE STARTING THE TOOL, SINCE

TORQUE FROM THE MOTOR CAN CAUSE THE TOOL TO TWIST.

Start the tool before applying to work and let the tool come to

full speed before contacting the workpiece. Lift the tool from the

work before releasing the switch. DO NOT turn the switch “ON”

and “OFF” while the tool is under load; this will greatly decrease

the switch life.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dremel DSM20 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info