34
and/or outlet grills or installing the heater too close to a wall or something similar.
When the heater has cooled down sufficiently, it will in principle start again
automatically, however if you do not remove the cause of the cut-off then this will
probably be repeated. Regular overheating can give rise to irreparable damage. In
case of overheating, switch off the heater and unplug. Give the heater time to cool
down, remove the source of the overheating and use as normal. If the problem
persists or if you have not been able to trace the source of the overheating, turn
the heater off immediately and unplug. Contact a servicing point to have the heater
repaired.
Cleaning and maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do
not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
Use a vacuum cleaner to carefully remove any dust and dirt from the grills and
ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if
possible. Store it upright in a cool, dry and dust-free place.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
