Bedienungsanleitung Felisatti AF180 (Seite 5 von 45) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

502483

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at hand to

use when carrying out maintenance on the indicated parts.

If the tool is used with care and normal maintenance is carried

out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual. Any other use of the tool

is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See gures)

A Push button (Fig.1)

B Trigger switch (Fig.1)

C Spindle blocking button (Fig.1 and Fig.3)

D Auxiliary handle (Fig. 1)

E Guard ange (Fig.2)

F Bolt (Fig. 2)

G Pin spanner (Fig.3)

H Clamping nut (Fig.3)

I Support plate (Fig.3)

J Spindle (shaft) (Fig.3)

K Rear handle turning button (Fig.1)

L Rear handle switch (Fig.1)

EQUIPMENT

- 1 disc guard

- 1 auxiliary handle.

- 1 pin spanner

- 1 support plate and 1 clamping nut

- Operating instructions

- Safety instructions

- Warranty

BRIEF DESCRIPTION

This angle grinder has been designed for cutting, deburring

and cutting metals and stone without the use of water.

TECHNICAL DATA

BEFORE USING THIS TOOL

Before using the tool, make sure the mains voltage is correct:

it must be the same as that on the specication label.

Machines with 230V can also be connected to a 220-V mains

supply.

Before plugging in the tool, always make sure the control

switch A and the trigger B work properly and return to the

“OFF” position when released.

FITTING SAFETY DEVICES

CAUTION! Always unplug the machine before carrying out

work on it. Always work with the guard in place and wear

protective goggles.

1.1. Fitting the disc guard

Insert the guard ange E in the slot in the collar of the machine

plate and turn it to the desired working position.

If the guard does not t in the collar, loosen the bolt F.

CAUTION! When tting, the closed part of the disc guard

should always point towards the user.

1.2. Fitting the auxiliary handle

Use of the auxiliary handle is obligatory in order to ensure

greater control and safety when handling the tool.

The auxiliary handle D must be screwed on to the right or left

side, or on top, depending on the type of work to be carried

out.

Auxiliary anti-vibration handle

The auxiliary handle D is made from a special material

that absorbs the vibrations, which allows you to work in a

comfortable and safe manner.

There is no modication in the auxiliary handle.

Do not use the auxiliary handle if it is damaged.

FITTING THE ACCESSORIES (DISCS AND WHEELS)

CAUTION! For safety reasons, the machine should always be

unplugged from the mains before changing the disc or wheel.

Always work with the guard on and wear safety goggles.

Use deburring and cutting discs with bre-reinforced

synthetic binders, for a max. peripheral speed of 80 m/s and

cup wheels with synthetic binder for 45 m/s.

Protect discs and wheels from knocks and blows.

Angle grinder AF180/1800S AF230/2100S AF230/2300S AF230/2600S

Input power W 1800 2100 2300 2600

Output power W 1170 1370 1500 1700

No-load speed /min 8000 6500 6000 6000

Max. disc diameter mm 180 230

Spindle thread ISO M14

Acoustic pressure dB(A) 95 95 96 95

Sound-power level dB(A) 108 106 109 106

Vibration acceleration m/s² 4,7 7,1 4,9 7,1

Approx. weight (w/o

accessories) according

E P T A P r o c e d u r e

01/2003

Kg. 3.8 5.4 5.4 6.7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti AF180 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info