Bedienungsanleitung Jablotron CU-07 (Seite 3 von 3) (Englisch)

554982

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

CU-07 Tracer unit 3/3 MKW51102

Command format: Password,REx

where: x – can have the following values:

0 – do not confirm any received SMS commands (default)

1 – confirm with an SMS message sent to the telephone number

from which the SMS command was received

Command example:

123456,RE1 (will be confirmed by

SMS the number from which the SMS command was received)

2.8. Ascertaining the current position

The current position of the unit can be ascertained by sending a

GPS command. The command requires a password. You will

receive an SMS message containing information about the

coordinates in degrees. If your mobile phone supports the direct

browsing of links in the received messages, the SMS also

includes a link to a website where you can directly view a map

showing the given position.

Command format: Password,GPS

Example of a command to ascertain the current position:

123456,GPS

2.9. Enabling SMS sending with activated roaming

The unit can confirm changes (e.g. choice of driver) by sending

an SMS. Confirmatory SMS message sending is forbidden

outside the national network. Enabling this function will result in

increased operating costs of your unit. The command can only

be set through your monitoring service provider.

2.10. Enabling data sending with activated roaming

The unit transmits data concerning the journey in progress to

the server using a GPRS connection. This is forbidden outside

the national GSM network. Enabling this function will result in

increased operating costs of your unit.

The command can only be set through your monitoring

service provider.

Note: If this function is not active, the data is saved in the unit

and it is then transferred to the server when the unit has

registered itself to the national GSM network again. You can

keep more than a month of daily journeys (approx. 15

hours/day) in the memory.

2.11. Notification of vehicle tampering and commencement

of a journey

The unit can notify you when your car is being tampered with

(e.g. shocks, towing away) by calling the telephone number from

which the SMS command was sent. The notification is

functional only if the unit is connected to a permanent

power supply. It becomes active when the journey

termination timeout has finished (see 2.6.) which is

indicated by switching off the LED indicator. You can speed

up the activation of this function by calling the unit’s

number and thus terminating the journey despite the

incomplete timeout.

Another option is a notification about the commencement of a

journey (speed exceeding 3 km/h) by calling the telephone

number from which the SMS command was sent. The

notification is functional only if the unit is connected to a

permanent power supply, and it only becomes active when

the journey termination timeout has finished (see 2.6.)

which is indicated by switching off the LED indicator. You

can speed up the activation of this function by calling the

unit’s number and thus terminating the journey despite the

incomplete timeout.

The above-mentioned “Notification“ functions are not security

functions and they cannot substitute a proper security system.

Command format: Password,Ax

where: x = 1 notification of vehicle tampering

x = 2 journey commencement notification

x = 0 notification disabled *(Note: see the note in

chapter 2.11. “Default settings“)

Command example:

123456,A1 (the unit calls the telephone

number from which the SMS command was send for approx. 15

seconds)

2.12. Default settings

Default settings of the unit’s settable parameters:

TELx the drivers’ telephone number list is empty

T journey type 00 (business)

D driver ID 01

ET journey time-out 300 s. (5 min.)

A dialling in (calling) 0 (disabled)

RE SMS confirmation 0 (disabled)

MC password set as 123456

* Note: when setting an SMS command concerning

confirmation by calling back (see 2.7.), it is necessary to

deactivate “voice mail“. Voice mail accepts calls

automatically even after the user’s call rejection which

results in increased operating costs for the unit's SIM card !

3. Technical specification

Power supply voltage ═ 8 - 30 V

Maximum power consumption 200 mA /12 V

Nominal current in GPRS mode 120 mA /12 V

Standby consumption 15 mA /12 V

Dimensions 160 x 42 x 19 mm,

Weight 84 g

Operating temperature range -20 to +80°C

Comply with ETSI EN 301 511, ETSI EN 301 489-1,

EN 60950-1

Intended for connection to a 12V or 24V power supply. The unit

is intended for operation in road vehicles.

JABLOTRON ALARMS a.s. hereby declares that the CU-07 is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC and ECE Regulation No.

10.03. The original of the conformity assessment can be found

at www.jablotron.com

, Technical Support section .

Note: Although this product does not contain any harmful

materials we suggest you return the product to the dealer or

directly to the producer after use.

10R-03 5144

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron CU-07 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info