631261
4
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
JA-80Y user manual MFJ55800
4
Notes:
As a factory default, setting (arming) by a SET instruction is confirmed by the system via
an SMS reply.
When the current system status does not allow system operation (e.g. when in
programming mode), you will be notified about the situation via an SMS reply.
In a split system, an xxxx_SET instruction will only have an effect on the section to which
the code xxxx belongs.
3. Unsetting (disarming) by SMS xxxx_UNSET
The UNSET instruction allows you to unset (disarm) the system, fully or partially. If the
system is already unset, it will not change its status.
Send an SMS message containing:
xxxx_UNSET
where: xxxx is a valid access code (user or master)
_ is a space character
Example: Sending 4321 UNSET will unset the system the same way as if the code 4321
had been entered on the system keypad.
Notes:
As a factory default, unsetting (disarming) by an UNSET instruction is confirmed by the
system via an SMS reply.
When the current system status does not allow system operation (e.g. when in
programming mode), you will be notified about the situation via an SMS reply.
In a split system, an xxxx_UNSET instruction will only have an effect on the section to
which the code xxxx belongs.
4. Status interrogation xxxx_STATUS
The STATUS instruction allows you to get information about the current system status.
The communicator will reply with an SMS reporting the current set/unset status, GSM
signal strength, GPRS connection status and transmission success/failure status for each
ARC involved.
Send an SMS message containing:
xxxx_STATUS
where: xxxx is a valid access code (user or master)
_ is a space character
Example: If the system is set, an SMS instruction 4321 STATUS will by replied to by
the system via an SMS message which might look like the following:
Report from your alarm: System status: Set, GSM:3/4, GPRS OK, MS1 OK,
MS2 OK
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Jablotron JA-80Y - GSM communicator wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Jablotron JA-80Y - GSM communicator

Jablotron JA-80Y - GSM communicator Installationsanweisung - Englisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info