631261
6
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
JA-80Y user manual MFJ55800
6
where: xxxx is a valid access code (user or master)
_ is a space character
Example: The xxxx_CREDIT request is responded to by the following message:
Report from your alarm: Credit: Current balance is 26.35€.
Note: This instruction has to be pre-configured according to GSM provider requirements
(see 19).
8. Remote control via a telephone keypad
If you want to operate the alarm system via a phone (mobile or landline), perform the
following:
Dial the GSM communicator number. If a phone is connected to the communicator in the
house, it will ring.
If the call is not answered, the system will answer in 25 seconds. This will be indicated by
a short beep.
On your phone keypad, enter a valid access code (user or master). An acoustic reply will
be heard according to the system status.
o 1 beep = set (armed)
o 2 beeps = unset (disarmed)
o 3 beeps = programming mode
o siren sound = alarm
From this moment on, the telephone keypad will work as a system keypad.
Any subsequent change to system status is again indicated acoustically. For instance,
after unsetting the system, you will hear two beeps.
You can operate devices X or Y via the phone keypad the same way as from a system
keypad. This means *81/*80 will control device X and *91/*90 will control device Y.
To terminate the connection simply hang up. Connection is automatically terminated
if there is no entry within 60 seconds.
Note: Remote access from a landline is only possible from a phone using tone dialling
(DTMF).
9. Remote control by dialling-in
With some limitations, the communicator allows you to operate the system by ringing the
communicator. This operation requires your phone number to have been pre-authorized by
being stored in the communicator memory (see 12).
Notes:
Dialling-in operation is not enabled for phones having hidden numbers.
If phone calls end before the control panel answers, remote control is for free.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Jablotron JA-80Y - GSM communicator wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Jablotron JA-80Y - GSM communicator

Jablotron JA-80Y - GSM communicator Installationsanweisung - Englisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info