Bedienungsanleitung Kuppersbusch EEB 9550.0 (Seite 10 von 14) (Englisch)

513471

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

EEB 9550.0 27

The electronic timer

As well as providing a short-time alarm for reminders, the electronic timer con-

trols the oven in several other ways. You can use it to set the cooking time

and the finish time. All functions are available in any mode or temperature

selection.

Display:



Time, alarm time (actual value in each

case)



Lamps, showing that the oven is

switched on.



Lamps (for each selector button/function)

Selector buttons:

Cooking time

Finish time

Alarm time

Adjust:

+/- for altering the values of all functions.

Setting/changing the clock

– Push simultaneously “

” and

“

”, until the time in the display

flashes.

– Adjust as required using “+”/“

-”.

– Wait for the display to stop flashing. The

time will then be accepted, and the dot

in the centre of the hour and the minu-

tes will flash every second.

Setting the alarm time

You can use the alarm on its own, without effecting the oven.

–Press “

”. The lamp will flash. The dis-

play will read “0.00”.

– Use “+”/“

-” to set the timer in minutes

and seconds.

– Start the timer with “

” or wait until the

lamp stops flashing. You will see in the

display the time remaining until the buz-

zer sounds.

An acoustic signal is generated when the

alarm time has elapsed.

– Press any button to stop the buzzer. The display will show the normal clock

again.

This is how to programme the switching operations

1. Selecting the operation:

– Press the selector button for the operation you wish to use. The lamp above

the button you have pressed will start to flash and a number will appear in

the display.

2. Altering/adjusting the operation:

– Adjust the value shown, using “+” and “-”.

3. Starting the operation:

If you do not press another button for 3 seconds, the operation will commence

automatically and the lamp will stay on all the time.

You can reduce the time by pressing a selector button:

- the previously selected button confirms the input and starts the operation.

- another button confirms the input and selects the new operation you have

chosen.

4. Setting the oven functions (switching functions only):

– Use the mode selector to select the mode and the temperature control to

select the temperature.

If you wish, you can set the temperature and mode before programming the

timer.

Changing the setting

If you wish to alter a setting you have made – even if the operation is running

– push the appropriate button again and use “

+”/“-” to change the value in

the display.

When the cooking time is finished

the oven will switch off and “End” will ap-

pear in the display. A warning signal will

sound. Both of the lamps next to the dis-

play will stop flashing.

– Press any selector button to stop the alarm buzzer.

The display will show the normal clock again. The oven starts again.

– Turn the temperature control and the mode selector switch to “0”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kuppersbusch EEB 9550.0 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kuppersbusch EEB 9550.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info