Bedienungsanleitung Kuppersbusch EEB 9550.0 (Seite 12 von 14) (Englisch)

513471

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

EEB 9550.0 29

Cleaning and care

You should carefully read this chapter before you use your appliance the first

time. If cleaned correctly and looked after regularly the appliance will remain

beautiful and clean for many years. Here you will find tips concerning the ca-

reful cleaning of the individual surfaces and how to look after them.

For all surfaces

[

Steam and/or pressure cleaning machines must not be used to clean the

appliance! This can damage the unit resulting in risk of personal injury.

[

Risk of burning! Make sure the appliance has cooled down before cle-

aning.

[

Please note the instructions of the cleaning agents.

Clean the appliance each time you use it. Not removed dirt will burn into the

surface the next time you switch it on and these incrustations can often be

not removed anymore.

Use a damp cloth or a soft sponge with warm water containing a small amount

of detergent to clean light amounts of dirt from the surface. Always wipe off

the surface completely with cold water to remove cleaning agents residues

which could cause discolouring and stains. Wipe dry afterwards.

You can find information in the following paragraphs concerning the in-

dividual surfaces and parts and how to remove heavy dirt.

Do not use any

- aggressive or bleaching cleaning agents containing for example active oxy-

gen, chlorine or corrosive components.

- abrasive or aggressive cleaning or scouring agents such as steel wool,

soap-impregnated steel wool, metal or plastic sponges or similar agents

with an abrasive surface.

Remove caking

Heavy dirt should first be soaked – best with a wet cloth. Afterwards it is easier

to remove the dirt.

Using a cleaning scraper

[

Caution! Risk of cutting! The blade of the cleaning scraper is very sharp!

Always keep the cleaning scraper flat

on the surface and push the caking

away.

[

Do not scratch the surface with

the edge of the scraper and take

care not to damage the sealing

with the edge.

The use of oven sprays - information

[

Please follow the instructions of the manufacturer.

Oven sprays damage aluminium, lacquered surfaces and plastic!

[

Do not spray into the opening of the ventilator at the backplate!

For environmental reasons you should not use oven spray at all. If you ne-

vertheless want to use it, only spray it in the oven interior and on enamel

baking trays.

Enamel

Oven interior, front, baking trays, drip pan

Some plastic sponges with abrasive side can be used. Some products do

however contain grains in the abrasive side of the sponge which can cause

scratches.

Carefully try out the sponge on a small surface!

A cleaning scraper for glass ceramic surfaces is suitable for removing

heavy dirt.

Oven spray may be used.

Stainless steel

Stainless steel door front, control panel, telescopic glide-out shelves

(acc. No. 601)

[

Stainless steel is very sensitive to scratches!

Do not use a cleaning scraper!

[

Remove any deposits of calcium or any spots of grease, and starch as

soon as possible, or stains will appear!

For the cleaning a cleaning agent for stainless steel can be used.

We recommend to clean once a week stainless steel surfaces with an usual

cleaning agent for stainless steel. This will create a protective film protecting

the stainless steel surface from discolouring.

Glass

Inside of the door – coated glass

[

If possible oven spray should not be used as it can cause the destruction

of the coated glass surface when used frequently.

A cleaning scraper for glass ceramic surfaces is suitable for removing heavy

dirt.

Door front, control panel

Clean the oven front with warm water containing a small amount of de-

tergent, with a damp cloth o a soft sponge. You may use glass cleaning

agents.

Aluminium

Door ledges and handles in aluminium, baking tray (acc. No. 543)

[

Aluminium is very sensitiv to scratches and oven spray spray causes da-

mage! Do not use a cleaning scraper!

Buttons

Clean the buttons with warm water containing a small amount of detergent,

with a damp cloth o a soft sponge.

Removing and installing the oven door

Removing the oven door

– Open the oven door as

wide as it will go.

– Fold up the clamps on the

door hinges.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kuppersbusch EEB 9550.0 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kuppersbusch EEB 9550.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info