Bedienungsanleitung Multiplex COCKPIT SX (Seite 80 von 84) (Englisch)

561578

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

COCKPIT SX

Page 78

Important:

Timer 2 resumes running if you switch on again.

The current time of Timer 2 is stored when you switch

the transmitter off. If you wish to start the time again

after switching off, you must first erase Timer 2 in the

INFO 3 or INFO 4 display (long press ª on the 3-D

digi-adjustor).

If you started Timer 2 before switching the transmitter

off, it starts running again immediately when you switch

the transmitter on again.

19.3. Additional timer switches

Any of the transmitter controls of the COCKPIT SX can

be used as a timer switch.

The switches are assigned in the T1 SW and T2 SW

menus using Quick-Select (move the transmitter con-

trol quickly until the desired code number appears).

The transmitter control then has to be moved to the

position at which you want the timer to run or start.

19.3.1. Switches 1 to 3

CS / A-ROT, D-R, SNAP / DTC

With the two-position switches 1 to 3 you can select the

position at which the timer is to run (Timer 1) or start

(Timer 2).

19.3.2. Switch 4

PH / AUX 2

Using the PH flight phase switch as a timer switch:

detailed description Î 19.2.1., example 2.

19.3.3. Switch 5

THROTTLE

THROTTLE control as timer switch:

in modes 1 to 4 : stick

in modes 5 to 8 : right-hand slider

THR R reverses the direction of effect

detailed description Î 19.1.1.

19.3.4. Switch 6

FLAP (left-hand slider)

If the left-hand slider (FLAP) is to be assigned as the

timer switch, you can select the switching threshold.

The method is the same as that described for the

THROTTLE (Î 19.1.1.)

The hyphen (marker) following the colon indicates the

selected switching threshold.

Switch 6 Marker Switching threshold

19.3.5. Switch 7

SPOILER

The SPOILER transmitter control can also be used as

a timer switch. Whether the SPOILER control is the

right-hand slider or a stick is determined by the stick

mode:

in modes 1 to 4 : right-hand slider is SPOILER

in modes 5 to 8 : stick is SPOILER

Note: SP+L R reverses the direction of effect

Changing the idle position for SPOILER in the SP+L R

menu also reverses the position for TIMER OFF.

Select the switching threshold using the method de-

scribed under Î 19.3.4. for FLAP.

19.4. Helicopter timers

With helicopters, the timers operate in exactly the same

manner as described for the model types EASY, ACRO

and GLIDER. The only difference is that the stick /

right-hand slider option is not present, as the HELI

model type only offers modes 1 to 4.

The following applies to helicopters:

Switch 5 is always the COLLECTIVE PITCH / THROT-

TLE stick

Switch 7 is always the right-hand slider (Throttle Limit)

19.4.1. Recording the motor run time

Use Timer 1 to record the motor run. The following

alternative methods of switching the timer are avail-

able:

a. COLL. PITCH / THROTTLE stick = Switch 5

Switch 5 is programmed using the method des-

cribed under Î 19.3.3. for THROTTLE>

a. Throttle Limiter (THR-LIMIT) = Switch 7

If you wish to switch the timer using the right-hand

slider, it is programmed using the method des-

cribed under Î 19.3.5. for SPOILER.

19.4.2. Recording the total flight time

Timer 2 is used for the overall flight time. A suitable

switch is the COLLECTIVE PITCH / THROTTLE stick.

The timer starts running when you move the stick from

the minimum position beyond the selected switching

threshold.

The programming is carried out as described under

Î 19.3.

19.5. Transmitter operating time

Menu: OP TIM

The transmitter’s total operating time can be read off in

the INFO 5 display; the maximum time is 99 hours and

59 minutes. If this time is exceeded, the timer stops at

99:59, and must be reset to 00:00 (see below).

INFO 5 display

19.5.1. Resetting the operating hours timer to

ZERO

Menu: (

TIMER) RES OP

There is a separate menu for resetting the operating

hours timer (RESET).

70%

35%

15%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex COCKPIT SX Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex COCKPIT SX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info