Bedienungsanleitung NAD C 326 BEE (Seite 11 von 16) (Englisch)

493507

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

8 VOL [ ]: Press [ ] button to increase or decrease the loudness level. Release the button

when the desired level is reached. For NAD Receivers, the VFD will also show “Volume Up” or

“Volume Down” while pressing SR 8’s . The VOLUME buttons do not aect recordings made using

the TAPE output but will aect the signal going to the PRE OUT output.

9 SPK A, SPK B: The [SPK A] and [SPK B] buttons engage or disengage the speakers connected

respectively to the Speakers A and Speakers B terminals. Toggle [SPK A] to switch ON or OFF the

speakers connected to the Speaker A terminals. Toggle [SPK B] to switch ON or OFF the speakers

connected to the Speaker B terminals. Press both buttons to engage both speakers. These buttons

are compatible only with specic NAD Receiver or Tuner models and do not apply to the C 326BEE.

10 TONE DFT: Tone controls are enabled or disabled by pressing this button.

CD PLAYER CONTROL (for use with NAD CD Player): Set the DEVICE SELECTOR to “CD” in order to

gain access to these buttons. Some of the control buttons below are applicable only to specic NAD

CD Player models; check the owner’s manual of your NAD CD Player for control button compatibility.

SCAN [ ]: Fast reverse/forward search.

[ ] : Open or close disc tray.

[ ] : Stop playback.

[ ] : Pause playback temporarily.

[ ] : Go to next track/le.

[ ] : Go to beginning of current track/le or to previous track/le.

[ ]: Start playback.

[ ]: Select through folder list/Select through WMA/MP3 les.

ENTER: Select desired folder or WMA/MP3 le.

DISP: Show playback time and other display information.

RAND: Play tracks/les in random order.

RPT: Repeat track, le or whole disc.

PROG: Enter or exit program mode.

CLEAR: Delete programmed track/le.

CD: Select CD as the active source.

USB: Select USB as the active source.

OPT: Select optical input as the active source.

SRC: Toggle to select desired SRC mode.

TUNER CONTROL (for use with NAD AM/FM/DAB Tuner): Set the DEVICE SELECTOR to “TUN” in

order to gain access to these buttons. Refer to the corresponding labels printed in the remote control

faceplate and their respective assigned buttons to make use of these functions. Some of the control

buttons below are applicable only to specic NAD Receiver or Tuner models; check the owner’s

manual of your NAD Receiver or Tuner for control button compatibility.

AUTO TUNE: In DAB mode, press this button to automatically scan all available local stations.

TUNE [ ] or [ ]: Step up or down between AM or FM frequencies.

PRESET [ ] or [ ]: Step up or down between stored radio presets.

AM/FM/DAB: Select AM, FM, DAB or XM band (if applicable).

TUNER MODE: In FM mode, toggle between “FM Mute On” and “FM Mute O”. In DAB mode,

pressing this button will activate Dynamic Range Control (DRC), Station Order or other applicable

DAB menu options.

BLEND: Engage or disengage BLEND feature.

MEMORY: Save current station into preset memory.

DELETE: Press and hold for about 2 seconds and the selected preset memory is erased.

[ ]: In DAB mode, in combination with TUNER MODE or other compatible buttons, toggle

to select through DAB feature options like Dynamic Range Control, Station Order and other

appropriate DAB options.

ENTER: In AM/FM mode, toggle to select Preset or Tune mode. In DAB mode, press and hold to

check signal strength.

INFO: Repeatedly pressing this button will show information as supplied by the current radio

station. The applicable display contents include related DAB display information and RDS

broadcast data.

IDENTIFICATION OF CONTROLS

SR 8 REMOTE CONTROL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD C 326 BEE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C 326 BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info