Bedienungsanleitung Naim NaimUniti 2 (Seite 3 von 25) (Englisch)

707486

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

NaimUniti 2 Introduction

1 NaimUniti 2 Introduction

NaimUniti 2 is a highly capable product that will repay time and effort spent on installation

and setup. We strongly recommend that you read this manual. NaimUniti 2 effectively

incorporates five separate elements. Each of these is introduced in the following

paragraphs and subsequently described in full detail in Sections 5 to 9. The NaimUniti 2

elements are:

An Integrated Stereo Amplifier Introduced below and fully described in Section 5

A CD Player Introduced below and fully described in Section 6

A Multi-mode Radio Introduced below and fully described in Section 7

A UPnP™ Audio Interface Introduced below and fully described in Section 8

A USB/iPod Audio Interface Introduced below and fully described in Section 9

Prior to the sections describing NaimUniti 2’s elements, Section 2 covers its installation,

Section 3 describes its operation and Section 4 describes its setup.

1.1 The Integrated Amplifier

1.1.1 Inputs

NaimUniti 2 incorporates an audio preamplifier that

provides five analogue and five S/PDIF digital audio

external inputs. The preamplifier also accepts internal

inputs from NaimUniti 2’s integrated CD player and FM/

DAB tuner.

In addition to conventional analogue and digital input

signals, the NaimUniti 2 preamplifier can accommodate

the following external peripheral inputs:

• iPodmodelsandUSBmemoryviaaUSBinterface.

• Internetradioanduniversalplugandplay(UPnP™)

servers via an Ethernet network socket or wireless

network connection.

1.1.2 Signal Outputs

The NaimUniti 2 preamplifier provides the following

analogue signal outputs:

• Alineoutput(prevolumeandbalancecontrols).

• Twomonounfilteredsubwooferoutputs

(post volume and balance controls).

• Apreamplifieroutput

(post volume and balance controls).

• Aheadphoneoutput

(post volume and balance controls).

1.1.3 Controls

The NaimUniti 2 preamplifier provides volume, balance,

input selection and mute control from either the front

panel or the supplied remote handset.

1.1.4 Speaker Outputs

NaimUniti 2 incorporates a stereo power amplifier rated at

70 Watts per channel into 8 Ohms. The power amplifier is

designed to drive one pair of speakers via the sockets on

the NaimUniti 2 rear panel.

1.2 The CD Player

NaimUniti 2 incorporates a CD player based on the same

swing-out CD drawer and transport used in other Naim CD

players. The transport is able to play standard “Red Book”

CDs and CDR discs. CD track order can be programmed

or tracks can be shuffled (played randomly).

1.3 The Multi-mode Radio

The NaimUniti 2 multi-mode radio combines an FM/DAB

(Digital Audio Broadcasting) tuner and an internet radio

(iRadio) player. A total of 40 radio stations across all three

modes can be stored as presets. In FM and DAB mode

stations are tuned by NaimUniti 2 scanning the respective

transmission bands. In iRadio mode NaimUniti 2 receives

data streams and a list of available radio stations from

a dedicated internet server. iRadio requires broadband

internet access via a home network connection.

The NaimUniti 2 DAB module incorporates full broadcast

and station display capabilities. The FM module is fully RDS

(Radio Data System) capable.

Note: DAB and RDS broadcasts are not available in all

territories.

1.4 The UPnP™ Audio Interface

NaimUniti 2 can connect to a home network and play

audio files stored on UPnP™ drives.

1.5 The USB/iPod Interface

NaimUniti 2 incorporates a front panel USB interface socket

that enables audio files stored on USB memory sticks and

Apple iPod models to be selected and played.

Note: 5th generation and later, and all iPod touch models,

are compatible with the NaimUniti 2 USB interface.

Note: Earlier iPod and other portable music players may

be connected from their headphone sockets to NaimUniti

2’s front panel analogue input using a 3.5mm stereo jack

cable. Player control via NaimUniti 2’s user interface will

not however be possible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim NaimUniti 2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim NaimUniti 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info