Bedienungsanleitung Philips MF-Jet 450 (Seite 20 von 40) (Englisch)

521770

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Fax

Resolution f%F

To change the resolution, keep pressing f%F

until the desired arrow symbol (d) is highlighted

on the display with §. If none of the three ar-

row symbols is highlighted on the display, the

machine is in standard resolution.

standard—for good quality documents, without

drawings or small details

f—for documents with drawings or small char-

acters

%—for documents with very ﬁ ne or small

drawings

F—for photos

Contrast O

If the document is too light or too dark, you may

change the contrast. Press O as many times as

necessary to choose the desired contrast. The

current setting is shown on the display.

Receiving faxes

If you have not changed the settings for fax re-

ception, faxes will be automatically received. (For

instructions on how to change the settings for

fax reception see chapter Advanced settings /

Fax settings.)

If there is no more paper in the feeder or if the

cartridge is empty, incoming faxes will be stored

in memory (storage capacity approx. 50 pages).

If the memory is full, no further pages can be

stored and certain functions can no longer be

performed. To empty the memory insert paper

or a cartridge and start printout of the faxes by

pressing Y.

v When a fax message is completely printed

out, it will be deleted from the memory.

If the printing process was interrupted,

all fax messages that have not been com-

pletely printed out will remain stored.

Memory lock

The memory lock stores the documents that

cannot be printed out immediately (see Receiv-

ing faxes) or that are not to be printed out. They

need not be printed as soon as you receive them.

The ; symbol on the display lets you know the

state of the memory lock:

; on—memory lock feature enabled

; flashing—documents are in the memory or

are being received

; off—memory is full or you have disabled au-

tomatic fax reception

To prevent faxes from being printed out by the

wrong person, you can protect access with a

four-digit answer code. Once stored, this code is

required to print fax messages and to activate/de-

activate the memory lock.

Storing an answer code

Press M, 343 and OK. Enter a four-digit

code and press OK.

Activate/deactivate

Press M, 342 and OK. If you have stored an

answer code, enter it and press OK. Use / to

select WITH or WITHOUT and press OK.

Printing messages

Press M, 341 and OK. If you have stored an

answer code, enter it and press OK. Documents

received and stored in the memory are printed

and then deleted from the memory.

Send report

The MF-JET 450 can print a send report every

time you have sent a document. This way you are

given conﬁ rmation that your document has been

received.

1 Press M, 231 and OK. Select one of the

following options:

WITH—a report is printed out after every suc-

cessful transmission (even if the called number

was busy).

WITHOUT—no send report; however, your MF-

JET 450 notes all transmissions that took place

in its log (see chapter Hints & tips / Logs).

ALWAYS—a report is printed out after every

transmission (even if the transmission was un-

successful because of a fault).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips MF-Jet 450 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips MF-Jet 450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info