Bedienungsanleitung Pioneer 506 xde (Seite 54 von 236) (Deutsch, Englisch, Französisch)

140416

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

Useful Adjustment Settings

Switching the vertical drive frequency

(AV mode only)

You can switch the vertical drive frequency for screen display

between 75 Hz and 100 Hz. Choose the drive frequency that

better suits your broadcasting signals.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Drive Mode” ( / then ENTER).

4 Select “75 Hz” or “100 Hz” ( / then ENTER).

5 Press HOME MENU to exit the menu.

NOTE

• This setting can be made for each input source separately.

• This setting cannot be made when 480i, 480p, 1080i@60Hz,

720p@60Hz, or 1080p@24Hz signals are input.

• If you select “Auto” for “Side Mask” (page 57), the selection

for “Drive Mode” becomes ineffective.

Adjusting image positions

(AV mode only)

Adjust the horizontal and vertical positions of images on the

Plasma Display.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Position” ( / then ENTER).

4 Select “H/V Position Adjust” ( / then ENTER).

5 Adjust the vertical position ( / ) or the horizontal

position ( / ).

6 Press HOME MENU to exit the menu.

NOTE

• To restore the factory defaults for all items, press / to

select “Reset” in step 4, and then press ENTER. A

confirmation screen appears. Press / to select “Yes”, and

then press ENTER.

• Adjustments are stored separately according to input

source.

Adjusting image positions and clock

automatically (PC mode only)

Use Auto Setup to automatically adjust the positions and clock

of images coming from a personal computer.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Auto Setup” ( / then ENTER).

• Auto Setup starts.

4 Press HOME MENU to exit the menu.

NOTE

• When Auto Setup is finished, “Auto Setup completed.”

appears.

• Even when “Auto Setup completed” appears, Auto Setup

may have failed, depending on conditions.

• Auto Setup may fail with a PC image composed of similar

patterns or monochrome. If not successful, change the PC

image and try again.

• Be sure to connect the computer to the Media Receiver and

switch it on before starting Auto Setup.

Adjusting image positions and clock

manually (PC mode only)

Usually you can easily adjust the positions and clock of images

using Auto Setup. Use Manual Setup to optimise the positions

and clock of images when necessary.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Manual Setup” ( / then ENTER).

4 Select the item to be adjusted ( / then ENTER).

5 Perform adjustment ( / and / ).

With “Clock” or “Phase” selected, you can change the

parameter using / .

6 Press HOME MENU to exit the menu.

NOTE

• To restore the factory defaults for all the items, press / to

select “Reset” in step 4, and then press ENTER. A

confirmation screen appears. Press / to select “Yes”, and

then press ENTER.

Drive Mode

75Hz

100Hz

Position

H/V Position Adjust

Reset

Option

Auto Setup

Manual Setup

H/V Position Adjust

Clock

Phase

Reset

PDP506XDE.book Page 54 Friday, June 17, 2005 3:08 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer 506 xde Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer 506 xde

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info