POWDP2550 EN
Copyright © 2021 VARO P a g e | 11 www.varo.com
▪ Remove the chips or sawdust from around the spindle and flanges.
▪ Replace the saw blade (the tips of the sawing teeth have to point in the same direction as
indicated by the arrow on the cover) and then reassemble all parts in the reverse order.
▪ Tighten cover plate screw.
▪ Turn the plastic cover back in its original position.
11 CLEANING AND MAINTENANCE
Before performing any work on the equipment, remove battery.
11.1 Cleaning
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
▪ Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
12 TECHNICAL DATA
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
15 STORAGE
▪ Thoroughly clean the whole machine and its accessories.
▪ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place; avoid too high and too low temperatures.
▪ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪ Don’t keep it in plastic bags to avoid humidity build-up.
