Bedienungsanleitung Skil 0755 (Seite 10 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

480091

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite



• This tool is not intended for professional use

 



• Keep tool, charger and cutting blades clean

 



- clean the tool with a damp cloth (do not use cleaning

agents or solvents)

- after use, always carefully clean and lightly lubricate

the cutting blades

 



• Regularly check the condition of the cutting blades and

the tightness of the blade bolts

• Regularly check for worn or damaged components and

have them repaired/replaced when necessary

• Sharpening the cutting blades

- remove cutting blades from tool before sharpening

- sharpen the cutting blades with a small and smooth

le, in case a solid object damaged them

- we advise you, however, to have the blades sharpened

by a specialist

- lubricate the cutting blades after sharpening

• Storage (

- store the tool  in a dry and locked-up place,

out of reach of children

- securely mount storage rail L on the wall with 4 screws

() and horizontally leveled

- use blade guards M 2 when storing the tool

- lubricate the cutting blades before storing the tool

• If the tool/charger should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool or charger  together with

proof of purchase to your dealer or the nearest SKIL

service station (addresses as well as the service

diagram of the tool are listed on www.skileurope.com)



• The following listing shows problem symptoms, possible

causes and corrective actions (if these do not identify and

correct the problem, contact your dealer or service station)

★ Tool operates intermittently

- internal wiring defective -> contact dealer/service

station

- on/o switch defective -> contact dealer/service

station

★ Motor runs but blades remain stationary

- internal fault -> contact dealer/service station

★ Cutting blades hot

- cutting blades blunt -> have blades sharpened

- cutting blades have dents -> have blades inspected

- too much friction due to lack of lubricant -> lubricate

blades



• 



 (only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol ! will remind you of this when the need for

disposing occurs

 

• Removing/disposing of batteries )

 



- protect battery terminals with heavy tape to prevent

short-circuit

- dispose of the battery at an ocial collection point

for batteries

 





• We declare under our sole responsibility that this product

is in conformity with the following standards or

standardized documents: EN 60335, EN 60745,

EN 61000, EN 55014 in accordance with the provisions

of the directives 2006/95/EC, 2004/108/EC, 2006/42/EC,

2000/14/EC, 2011/65/EU

• : SKIL Europe BV (PT-SEU/PJE),

4825 BD Breda, NL

ÊÆÇÎ¹Æ¼½ÊÄÇÇÌ

Á»½Ê½ËÁ¼½ÆÌ

È½Ê¹ÌÁÇÆËŵÆ¿ÁÆ½½ÊÁÆ¿

ÍÊÇÈ½Ɠˁ˅ʿ˂Ê½¼¹Ɠ

¹ÆÊÇÅÅ½Ä½Æ

ÈÈÊÇÎ¹Ä¹Æ¹¿½Ê

23.11.2011





• Measured in accordance with EN 60745 the sound

pressure level of this tool is 56 dB(A) and the sound power

level 76 dB(A) (standard deviation: 3 dB), and the vibration

< 2.5 m/s² (hand-arm method; uncertainty K = 1.5 m/s²)

• Measured in accordance with 2000/14/EC (EN/ISO

3744) the guaranteed sound power level LWA is lower

than 79 dB(A) (conformity assessment procedure

according to Annex VI)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

 the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

 the exposure level

 







Skil 0755 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info