Bedienungsanleitung Sony BDV-EF220 (Seite 46 von 56) (Englisch)

501108

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

No picture appears when the video output

resolution selected in [Output Video Format]

is incorrect.

t Press and hold N and VOL – on the unit for

more than 5 seconds to reset the video output

resolution to the lowest resolution.

The dark area of the picture is too dark/the

bright area is too bright or unnatural.

t Set [Picture Quality Mode] to [Standard]

(default) (page 27).

The picture is not output correctly.

t Check the [Output Video Format] settings in

[Screen Settings] (page 38).

t If the analog and digital signals are output at

the same time, set [BD-ROM 24p Output] or

[DVD-ROM 24p Output] in [Screen Settings]

to [Off] (page 38).

t For BD-ROMs, check the [BD-ROM 24p

Output] settings in [Screen Settings] (page 38).

Picture noise appears.

t Clean the disc.

t If the picture output from your system goes

through your VCR to get to your TV, the copy-

protection signal applied to some BD/DVD

programs could affect picture quality. If you

still experience problems even when you

connect your unit directly to your TV, try

connecting your unit to the other input jacks.

An image is not displayed on the entire TV

screen.

t Check the setting of [TV Type] in [Screen

Settings](page 38).

t The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV screen.

t If the speakers are used with a CRT-based TV

or projector, install the speakers at least 0.3

meters from the TV set.

t If the color irregularity persists, turn off the TV

set once, then turn it on after 15 to 30 minutes.

t Make sure that no magnetic object (magnetic

latch on a TV stand, health care device, toy,

etc.) is placed near the speakers.

There is no picture after playing a video/

photo file on the iPod/iPhone.

t Select the input on your TV for this system.

There is no sound.

t The speaker cords are not connected securely.

t Check the speaker settings (page 32).

There is no sound from the TV via the HDMI

(OUT) jack when using the Audio Return

Channel function.

t Set [Control for HDMI] in [HDMI Settings] of

[System Settings] to [On] (page 40). Also, set

[Audio Return Channel] in [HDMI Settings] of

[System Settings] to [Auto] (page 40).

t Make sure that your TV is compatible with the

Audio Return Channel function.

t Make sure that an HDMI cable is connected to

a jack on your TV that is compatible with the

Audio Return Channel function.

The system does not output sound of TV

programs correctly when connected to a set-

top box.

t Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to [Off]

(page 40).

t Check the connections (page 15).

Severe hum or noise is heard.

t Move your TV away from the audio

components.

t Clean the disc.

The sound loses stereo effect when you play

a CD.

t Select stereo sound by pressing AUDIO

(page 29).

Distortion occurs in the sound of a connected

component.

t Reduce the input level for the connected

component by setting [Attenuate - AUDIO]

(page 39).

Radio stations cannot be tuned in.

t Check that the antenna (aerial) is connected

securely. Adjust the antenna (aerial) or connect

an external antenna (aerial) if necessary.

Sound

Tuner

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDV-EF220 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDV-EF220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info