649702

Telwin FLASH START 700 Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
- 3 -
(EN)
INSTRUCTION MANUAL
WARNING: READ THE INSTRUCTION MANUALCAREFULLY
BEFORE USING THE STARTER!
1. GENERAL SAFETY USER INSTRUCTIONS FOR THIS
STARTER
In order to reduce the risk of personal injury and damage
to equipment, it is highly recommended to comply with all
essential safety measures and precautions when using the
starter.
- Inexperienced and untrained personnel should be properly
instructed before using the appliance.
- Childrenmustbesupervisedtopreventthemfromplaying
with the appliance.
- Readcarefullyand followthe instructionsprovidedinthe
manualofthevehicletobestarted:thevehiclemanufacturer
may indicate what types of emergency starts are permitted
andthosetobeavoided.
-
Protect the eyes. Always wear protective goggles when
using acid lead accumulators.
- Avoid contact with battery acid. If an operator should be
sprayed or come into contact with the acid, rinse the
relative parts immediately under clean running water.
Continue to rinse the area until the physician arrives.
-
It is important to connect the cables with the poles in
the right direction:
First connect the red clamp to the positive terminal on
the vehicle battery (+ symbol).
Connect the black clamp to the vehicle chassis or the negative
clamp on the battery, at a distance from the fuel pipe.
- Use the starter in well ventilated areas. Do not attempt to use
the starter when there is gas or inammable liquids in the
vicinity.
- Do not allow the black and red clamps to come into contact.
- FOR 12 VOLT SYSTEMS ONLY! This device is destined for use
on vehicles running on 12 Volt electrical systems only.
- USE IN EMERGENCY SITUATIONS ONLY: Use it during start-
up operations only.
- Do not work alone. If there is an accident, the assistant can be of
aid to the operator.
-
Avoid electrical shocks. Be very cautious when
applying the clamps to non-insulated conductors or bus
bars. Avoid all body contact with surfaces of tubes,
radiators, and metal power substations whilst reading the vehicle
battery voltage.
- Keep the work area clean at all times. Untidy cumbersome areas
can lead to injuries.
- Protect the starter appropriately from all possible damage. It
must only be used as indicated in this Instruction Manual.
- Ensure compliance with the indications in the work area. Do
not use in humid or wet facilities. Never leave it out in the rain.
Always work in well lit areas.
-
Keepoutofreachofchildren:theymustneverbe
allowed to access work areas or handle any
machines, instruments or extensions.
-
Alwayswearsuitableclothing.Neverwear baggy
clothing or jewellery that can get caught up in
moving parts. During all operations, the use of
electrically insulated protection clothing and non-slip boots
must be worn at all times. Persons with long hair must tie it
back and wear a hair net.
- Only experts are allowed to do repair work on the starter as it
involves signicant risk levels for inexperienced workers.
- Replacing parts and accessories. When performing maintenance
operations, replace with identical and original spare parts only.
Use of non-original spare parts invalidates all warranties.
- Make sure that the device is always positioned in a stable and
well supported manner.
Never climb over cables or electrical structures.
- Careful attention must be paid during maintaining work on
the starter. Check the condition of cables on a regular basis
and if any damage is detected, have the same repaired by an
authorised and qualied technician.
- Check there are no damaged parts. Before using this starter,
carefully check that all seemingly damaged parts and assess
whether or not they can operate correctly. Check that the
cables are securely fastened to the starter. Remember that only
authorised and qualied technicians are allowed to repair or
replace damaged parts.
Keeping this manual.
The manual should be read, paying attention to all the warnings
and safety precautions to be taken when using and maintaining
the device, the list of components and all technical specications.
Please keep this manual in a secure and dry place for future
reference.
2. INTRODUCTION AND GENERAL DESCRIPTION
Intended use
Portable batteryless starter (super capacitors technology). It starts
a large eet of vehicles even at low temperatures.
Needs no maintenance as it exploits the residual battery power to
start the vehicle.
Ideal for anyone needing a 12V emergency starter.
Its applications include use on motorcycles, automobiles, boats
and many more.
Fully compatible with any 12-volt starter system.
The starter is tted with internal devices that protect the user and
the equipment during the starter phase:
- no sparks generated;
- short circuit protection between the clamps;
- protection against polarity inversion.
Description(gureA):
A-1. Starter.
A-2. Starter clamps.
A-3. “ON/OFF” button.
A-4. “GLOW” function button.
A-5. Led indicator.
A-6. Charger cable with cigarette lighter type 12V jack plug.
A-7. 12V charger socket.
A-8. 5V mini USB charger socket.
A-9. Voltage level indicator led.
A-10. Hexagonal key.
3. INSTALLATION
POSITIONING THE STARTER
When using the starter, position it on a horizontal, at and stable
surface.
4. OPERATING INFORMATION
4.1 How to use the starter:
Inmostsituations,thevehicle’srundownbatteryisstillable
toprovidethe powerrequiredforacompletechargeof this
starter.
WARNING: follow these instructions
meticulously,and alwaysintheorder given
below!
Alwayspreventtheblackandredclampsfromtouchingeach
other or a common cable!
- Make sure that the vehicle or boat to be started is switched off
(switch or ignition key in the OFF position).
- Connect the red clamp POS. (+) to the battery terminal POS. (+),
then connect the black clamp NEG. (-) to the vehicle chassis or
the battery terminal NEG. (-), at a distance from the fuel pipe.
- The LED indicator (g. A-9) comes on automatically to indicated
the vehicle battery voltage level.
- Press the ON/OFF button (g. A-3), the starter will start to
charge: the indicator in gure A-9 now displays the starter charge
status.
- Wait until the GREEN 14V LED stops ashing and remains ON.
- Start the engine.
WARNING: failure to follow these rules may
compromisetheoperatinglifeofthedevice:
- Turnthe vehicleignition tothestart positionfor nomore
3 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Telwin FLASH START 700 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info