Bedienungsanleitung Topcom KS-4249 (Seite 7 von 62) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Alle Sprachen)

719680

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Babyviewer - KS-4248 KS-4249

ENGLISH

13 Storage and disposal instructions

13.1 Storage

Remove the batteries (regular or rechargeable) from the parent

unit and the baby unit.

Store the equipment in a dry location.

13.2 Waste disposal of package materials

The package materials are environmentally friendly

materials that can be given to your local waste collector

for recycling.

13.3 Waste disposal (environmental protection)

Dispose of the equipment in accordance with the

provisions of European Directive 2002/96/EC, Waste

Electrical and Electronic Equipment (WEEE),

regarding discarded electrical and electronic

equipment. Contact your municipal waste disposal

department for information.

Dispose of batteries (regular or rechargeable) in an

environmentally friendly manner in accordance with local

regulations.

14 EC conformity declaration

Hereby, Tristar Europe declares that the radio equipment type

KS-4248 / KS-4249 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the

following internet adress:

http://www.tristar.eu/tristar_group/download_center

15 Tristar warranty

15.1 Warranty period

The Tristar units have a 24-month warranty period. The warranty

period starts on the day the new unit is purchased. There is no

warranty on standard or rechargeable batteries (AA/AAA type).

Consumable or defects causing a negligible effect on operation or

value of the equipment are not covered. The warranty has to be

proven by presentation of the original or copy of the purchase

receipt, on which the date of purchase and the unit-model are

indicated.

15.2 Warranty exclusions

Damage or defects caused by incorrect treatment or operation

and damage resulting from use of non-original parts or

accessories are not covered by the warranty. The warranty does

not cover damage caused by outside factors, such as lightning,

water and fire, nor any damage caused during transportation. No

warranty can be claimed if the serial number on the units has been

changed, removed or rendered illegible. Any warranty claims will

be invalid if the unit has been repaired, altered or modified by the

buyer.

15.3 LCD defect policy

Despite the highest possible standards, the intricate

manufacturing of liquid crystal display (LCD) screens may still

produce slight visual imperfections. However, there will be

provided a warranty service for your Babyviewer LCD screen if

there are:

– 3 bright dots or 5 dark dots or 8 bright and/or dark dots in total; or

– 2 adjacent bright dots or 2 adjacent dark dots; or

– 3 bright and/or dark dots inside an area of 15mm diameter

These TFT LCD screen warranty conditions are offered by the

LCD manufacturers. Therefore, at its option, the

product will be repaired or replaced.

Please note: A bright dot is a white or sub-pixel that is always on.

A dark dot is a black or sub-pixel that is always off.

Problem

Possible

cause

Solution

The rechargeable

battery pack of the

parent unit does

not charge

Charging station

plug not connected

Connect plug

Dirty contacts Clean the battery

terminals and

charging station

contacts with a soft

cloth

The rechargeable

battery pack is

defective

Replace the

battery pack

Parent unit does

not switch on

(display remains

black)

The rechargeable

battery pack is not

charged

Charge the battery

pack

Equipment

defective

Contact customer

service

The ‘out of range’

icon appears on

the parent unit

display

Baby unit not

switched on

Switch on the baby

unit

The parent unit and

baby unit are too

far apart

Reduce the

distance between

the parent unit and

the baby unit

The parent unit is

not registered with

the baby unit

unit with the baby

unit (see “10.14

Registering the

parent unit with the

baby unit or

registering a new

camera.”

The wrong camera

is selected.

See “10.15

Selecting the

camera”

The parent unit

does not reproduce

the sounds picked

up by the baby unit

The volume setting

of the parent unit

may be too low.

Increase the

volume setting of

the parent unit

The microphone

sensitivity of the

baby unit may be

set too low.

Check the VOX

sensitivity and the

volume setting of

the parent unit and

increase if

necessary.

Limited range and

interference during

transmission

The range of the

equipment

depends on the

surroundings.

Steel structures

and concrete walls

can impair

transmission.

Avoid obstacles as

much as possible.

The equipment

emits a high-

pitched whistle

The parent unit and

baby unit are too

close together

Increase the

distance to at least

2 metres

We recommend that you keep the box and

packing materials so you can use them to

transport the equipment in the future if necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom KS-4249 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info