581328
4
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
5
6
23
PERIOD
MORNING
DAY
EVENING
NIGHT
Below is a Schedule of the Pre-programmed Time and Temperature Settings:
P TIME
Programs
This thermostat is equipped with 5+1+1 day programming - separate programming for weekdays,
Saturday and Sunday, with four settings per day. This thermostat is pre-programmed for your
convenience or you can set your own programs as desired.
Program 1: MORNING
Program 2: DAY
Program 3: EVENING
Program 4: NIGHT
Heating and Cooling modes have separate programs.
P1
P2
P3
P4
6:00am
8:00am
5:00pm
10:00pm
HEAT COOL
SETPOINT
oo
69.0 F (20.5 C)
oo
63.5 F (17.5 C)
oo
70.0 F (21.0 C)
oo
62.5 F (17.0 C)
oo
77.0 F (25.0 C)
oo
84.0 F (29.0 C)
oo
77.0 F (25.0 C)
oo
79.0 F (26.0 C)
SETPOINT
Heating Program
Slide the system switch to the HEAT position and press the PROG key once. The P1 and
SET PROGRAM symbol will appear on the display. MO to FR symbol is shown indicating weekday
program is being displayed. (Figure 1)
Use AHEAD or BACK to select the desired start time for weekday program 1.
Use UP or DOWN (on extreme right) to set the desired temperature.
Temperature can be set in increments of 0.5°.
Program time can be set in increments of 10 minutes.
After setting correct time and temperature for program 1, press PROG again to display weekday
program 2. Use same method to set the desired time and temperature for weekday program 2.
2
1
3
4
6
5
2-wire heating
Heating Relay
RC
RH
Y
W
H2
H1
B
O
G
Heating Relay
Fan Relay
RC
RH
Y
W
H2
H1
B
O
G
JUMPER
Cooling Relay
Heating Relay
Fan Relay
RC
RH
Y
W
H2
H1
B
O
G
JUMPER
3-wire heating
4-wire heating/cooling
5-wire heating/cooling
RC
RH
Y
W
H2
H1
B
O
G
Heating Relay
Fan Relay
Cooling Relay
Cool Damper
Heat Damper
Optional
Wiring
Heat Transformer
Cool Transformer
this is typically for the morning when you may prefer a warmer temperature.
this is an energy-savings mode for the time you are away from home. The
setting can be adjusted to minimize energy consumption.
this is for the time you return home and want the house at a comfortable
temperature, typically warmer settings during winter and cooler settings
during summer.
this is a sleep mode. You may choose to set temperature for energy savings
or comfort as desired.
:
:
:
:
Wiring Diagram
24
Installing control wires for humidifier control (THM303M only)
If control of the humidifier is desired, the 2 wires connecting the original humidistat needs to be
connected to the 2 terminals marked 'H1' and 'H2' on the THM303M.
The original humidistat should be removed or set to 'OFF' position.
Noted: The 2 humidifier control terminals 'H1' and 'H2' are electrically isolated from the Heat / Cool
terminals.
RC
RH
Y
W
H2
H1
B
O
G
Humidifier
M
Humidistat should be off or Disconnected
JUMPER
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für UPM THM302M wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von UPM THM302M

UPM THM302M Bedienungsanleitung - Französisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info