Zoom out
Zoom in
Vorherige Seite
1/5
Nächste Seite
1
MACHINE OPERATION
Additional information (including troubleshooting and service) can be found in the individual chapters of
the Instructions for use.
Sort laundry according to
care symbols
Do not tumble dry
Suitable for tumble drying –
at low temperatures
Suitable for tumble drying
Sort laundry by:
Material thickness: whenever there is greater load than the dryer can handle, separate
laundry according to weight (e.g. dry towels and thin underwear separately).
Type of material: cotton (linen); synthetic textiles (easy care).
Degree of drying: cupboard dry, iron dry etc.
Do not tumble dry: nylon stockings, delicate embroidery, fabrics with metallic decorations.
Preparing laundry
Check that all fastenings are closed and that pockets are empty.
Please ensure that there are no cigarette lighters in the laundry.
Turn laundry inside out.
Loading dryer
Place laundry loosely in the drum to achieve equal drying throughout.
Then close the door.
Selecting programme
Select the drying programme required by turning the programme selector knob (for
information, refer to programme table).
If you do not start the programme soon after having made your choice, the dryer will switch
off after a few minutes.
To switch the dryer on again turn the programme selector knob to “Off” (“0”) and afterwards
to the desired programme.
Selecting options
(if available)
Select the option required by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection.
A fast blinking lamp indicates a wrong selection is made (incompatible options).
Press the button again to cancel the option.
Starting dryer
The drying programme is started by pressing the “Start (Pause)” button.
The relevant indicator lamp lights up.
Changing programme selection: If the programme selected is changed during drying, the
dryer stops.
The “Start (Pause)” indicator lamp flashes.
To operate the new programme, press the “Start (Pause) button again.
Interrupting programme: To interrupt a drying cycle, press the “Start (Pause)” button and
open the door.
Wait at least 5 minutes, to allow the laundry to cool down, before you unload the dryer.
For your safety the drying cycle stops automatically if you open the door.
To restart, after door opening, close the door and press the “Start (Pause) button again.
Warning: Never stop a tumble dryer before the end of the drying cycle, unless all items are
quickly removed and spread out so that the heat is dissipated.
Programme end –
unloading dryer
The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the items
reach a lower temperature to avoid wrinkling.
End: Take the laundry out of the dryer.
The drying process is complete.
Anticrease: If the laundry is not removed at the end of the drying cycle, an automatic anti-
crease cycle will operate for maximum 15 min (by choosing the option “Anticrease” this time
can be extended up to 12 hours).
The drum rotates to prevent the laundry from creasing.
After the end of the “Anticrease” the dryer will switch off after a short time, to save energy.
Switching dryer off
Set the programme selector knob to “Off” (“0”).
Cleaning the lint filter after every cycle: open door, pull lint filter up and out of machine and open it. Brush lint using a soft brush or
your fingertips. Close door filter and push firmly back into place.
Emptying water container: pull container out by the handle and empty. Replace the container when empty by pushing it completely
back into place.
Please note: Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which have been
provided with the garment or article.
Power consumption: in off-mode 0.065 W / in left on-mode 0.065 W.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    MACHINE OPERATION
    Additional information (including troubleshooting and service) can be found in the individual chapters of
    the Instructions for use.
    Sort laundry according to
    care symbols
    Do not tumble dry
    Suitable for tumble drying –
    at low temperatures

    Sort laundry by:
    Material thickness: whenever there is greater load than the dryer can handle, separate
    laundry according to weight (e.g. dry towels and thin underwear separately).
    Type of material: cotton (linen); synthetic textiles (easy care).
    Degree of drying: cupboard dry, iron dry etc.
    Do not tumble dry: nylon stockings, delicate embroidery, fabrics with metallic decorations.

    Suitable for tumble drying

    Preparing laundry

    Loading dryer

    Selecting programme

    Selecting options
    (if available)

    Starting dryer

    Check that all fastenings are closed and that pockets are empty.
    Please ensure that there are no cigarette lighters in the laundry.
    Turn laundry inside out.

    Place laundry loosely in the drum to achieve equal drying throughout.
    Then close the door.

    Select the drying programme required by turning the programme selector knob (for
    information, refer to programme table).
    If you do not start the programme soon after having made your choice, the dryer will switch
    off after a few minutes.
    To switch the dryer on again turn the programme selector knob to “Off” (“0”) and afterwards
    to the desired programme.
    Select the option required by pressing the corresponding button.
    The indicator lamp above the relevant button lights up to confirm your selection.
    A fast blinking lamp indicates a wrong selection is made (incompatible options).
    Press the button again to cancel the option.
    The drying programme is started by pressing the “Start (Pause)” button.
    The relevant indicator lamp lights up.
    Changing programme selection: If the programme selected is changed during drying, the
    dryer stops.
    The “Start (Pause)” indicator lamp flashes.
    To operate the new programme, press the “Start (Pause)” button again.
    Interrupting programme: To interrupt a drying cycle, press the “Start (Pause)” button and
    open the door.
    Wait at least 5 minutes, to allow the laundry to cool down, before you unload the dryer.
    For your safety the drying cycle stops automatically if you open the door.
    To restart, after door opening, close the door and press the “Start (Pause)” button again.
    Warning: Never stop a tumble dryer before the end of the drying cycle, unless all items are
    quickly removed and spread out so that the heat is dissipated.

    Programme end –
    unloading dryer

    The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the items
    reach a lower temperature to avoid wrinkling.
    End: Take the laundry out of the dryer.
    The drying process is complete.
    Anticrease: If the laundry is not removed at the end of the drying cycle, an automatic anticrease cycle will operate for maximum 15 min (by choosing the option “Anticrease” this time
    can be extended up to 12 hours).
    The drum rotates to prevent the laundry from creasing.
    After the end of the “Anticrease” the dryer will switch off after a short time, to save energy.

    Switching dryer off

    Set the programme selector knob to “Off” (“0”).

    Cleaning the lint filter after every cycle: open door, pull lint filter up and out of machine and open it. Brush lint using a soft brush or
    your fingertips. Close door filter and push firmly back into place.
    Emptying water container: pull container out by the handle and empty. Replace the container when empty by pushing it completely
    back into place.
    Please note: Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
    thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
    The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which have been
    provided with the garment or article.
    Power consumption: in off-mode 0.065 W / in left on-mode 0.065 W.

    1



  • Page 2

    Extra dry

    Terry towels, dry towels, bed linen, underwear

    Multi-layered, thick laundry such as: terry towels, terry
    towelling bath robes.

    Overview of programmes

    Cupboard dry +
    Similar types of laundry which do not require ironing
    such as: dry towels, bed linen, underwear, baby
    clothes, T-shirts, cotton socks.

    Type of textile

    Kastdroog plus

    Cupboard dry*

    Laundry which requires ironing such as: bed and table
    linen, dry towels, T-shirts, polo shirts, work clothes.

    Extra droog

    Kastdroog

    Iron dry*

    Laundry which does not require ironing such as: shirts,
    blouses, T-shirts, sportsware.

    Strijkdroog

    Cupboard dry*

    Laundry which requires ironing such as: trousers,
    dresses, skirts, shirts, blouses.

    Laundry with thick, multi-layered areas such as: bed
    and table linen, track suits, anoraks, blankets.

    Kastdroog

    Iron dry

    Extra dry

    Strijkdroog

    T-shirts, blouses, towels, underwear, sportswear.

    All textiles.

    2

    Mixed load

    Laundry is aired, refreshed and loosen up
    for 30 minutes without heating.

    *Test programmes according to EN61121, tested with maximum rated load capacity.

    Completes drying (suitable for all fabrics)

    Mix

    Extra droog

    Programmes / Drying levels

    Cotton
    Synthetic
    Airing

    Special
    programmes
    Drying
    times

    Fabrics

    Cotton or linen hot wash /
    coloured laundry

    Katoen
    Max. 7.0 kg

    Synthetic, mixed fibre or
    cotton easy care (ironing
    not required) laundry

    Synthetisch
    Max. 3.5 kg

    3.0 kg

    Cotton – synthetic blend

    Luchten
    Tijd
    20’ 30’ 40’ 60’ 90’

    X

    X

    X

    X

    Gentle
    Beschermen

    X

    X

    X

    X

    X

    (Pauze)

    X

    X

    X

    X

    X

    X

    Droog+

    X

    X

    X

    X

    X

    X

    X

    Start delay
    Start
    selectie

    80

    45

    55

    80

    100

    115

    140

    160

    Very
    wet load



    60

    35

    40

    60

    95

    100

    120

    140

    Wet load

    Approximate
    drying times
    (in minutes)

    X

    X

    X

    X



    Options

    X

    X

    X

    X

    Dry plus

    X

    X



    X

    Pause

    X

    X



    Start



    X

    20’ 30’ 40’ 60’ 90’

    X



  • Page 3

    HOW TO PROCEED IF…
    ...you want to check the dryer yourself first: (If your machine is not functioning correctly, please check the
    following points before calling the customer service – also refer to relevant chapter in the Instructions for use)

    Drying takes too long /
    Laundry is not dry
    enough

    The dryer does not
    operate (after a power
    failure, always press
    the “Start (Pause)”
    button)

     Has the correct drying programme been selected?
     Has the cycle been interrupted (door opening, full water container)?
     Was the inserted laundry too wet (washing machine spin speed less
    than 1000 rpm)?
     Is the lint filter dirty (filter indicator light on)?
     Is the heat exchanger dirty (for more information, refer to the
    Instructions for use)?
     Is the room temperature too high?
     Is the “End” and “Anticrease” indicator lamp lighting up?
    The drying cycle is complete and the laundry can be taken out.
     If the drying result does not meet your expectation, select a more dry
    programme or use the dryness adjustment option (if available) to
    optimize the drying result.
     Is thin and thick load mixed? Are different types of materials mixed?
    Sort the laundry after thickness and material and dry again.







    Is the plug properly inserted into the mains electricity socket?
    Is there a power failure?
    Has the fuse blown?
    Is the door properly closed?
    Has a drying programme been selected?
    Has the “Start (Pause)” button been pressed shortly after a
    programme is selected? (If not, the dryer will switch off.)
     Has the start delay option been selected?
     Is the dryer overloaded?  Please remove a part of the load.

    Filter, water container
    indicator lamp on

     Is the lint filter clean?
     Is the water container empty?
     Has the water container been inserted correctly?
     Is the heat exchanger clean and inserted correctly?

    Water droplets
    underneath the dryer

     Has the heat exchanger been inserted correctly?
     Have all lint on the heat exchanger seal and the door seal been
    wiped away?
     Has the water container been inserted correctly?
     If the direct drain connection is used, is it tight?
     Is the dryer leveled?

    ...you want to care of and clean your dryer:

    Clean the filter at the
    end of every cycle

     Brush lint using a soft brush or your fingertips.
     Close the filter.
     Push the filter back into place.

    Empty the water
    container at the end of
    every drying cycle

     Pull the handle to remove the water container.
     Empty the water container.
     Replace the water container when empty by pushing it completely
    back into place.

    Clean the heat
    exchanger at least
    once a month

     Clean the heat exchanger under running water.
     Remove all fluffs from the seals.
     Clean the heat exchanger housing (for further information see
    chapter “Cleaning the heat exchanger” in the Instructions for use).

    3



  • Page 4

    FAILURE CODES
    In case of a malfunction of the dryer, one the following failure codes could be displayed.
    Depending on the model of your dryer, the failure can be displayed in letters or by different blinking lamps.
    Failure
    code

    Check needed by customer before
    Service call

    Lamps failure code

    F01

    Please call the After-Sales-Service.

    F02

    Please call the After-Sales-Service.

    F03

    Please call the After-Sales-Service.

    F04

    Please call the After-Sales-Service.

    F05

    Turn OFF the dryer.
    Unplug the dryer.
    Assure that the ambient temperature is
    between 5°C and 35°C.
    Wait for 1 hour.
    Plug the dryer again and restart the dryer.
    If the failure occurs again, please call the
    After-Sales-Service.

    F06

    F07

    F10 – F22

    Turn OFF the dryer.
    Unplug the dryer.
    Wait for 30 minutes.
    Plug the dryer again and restart the dryer.
    If the failure occurs again, please call the
    After-Sales-Service.

    Start lamp is blinking 2 times per second when it is pressed

    Assure that the door is correctly closed and
    heat exchanger correctly positioned.

    Heat exchanger lamp is blinking 2 times when the Start
    button is pressed

    Assure that the heat exchanger is correctly
    positioned.

    4



  • Page 5

    Before using the machine, please also read the instructions for use carefully!

    Quick Reference Guide

    Indicator lamps and Options
    Programme selector knob

    Start delay

    The drying programme is selected by turning
    this knob.
    The “Start (Pause)” indicator lamp flashes.

    Delays the start of the drying cycle by 3, 6 or
    9 hours.
    Each time the button is pressed the delay is
    increased by 3 hours.
    Press the “Start (Pause)” button to confirm
    the final selection and to start the dryer.
    The lamps above the programme selector
    knob are flashing to indicate the selected
    time.
    During the countdown, the drum will turn from
    time to time to redistribute the laundry and
    the pump will start to pump water in the water
    container.
    To cancel or change the previously set time
    delay, set the index of the programme
    selector knob to “off” position, or open the
    door.

    “Start (Pause)” button
    The drying programme is started by pressing
    this button.
    The indicator lamp lights up.

    Filter
    The indicator lamp lights up when the filter
    and/or heat exchanger including housing
    needs to be cleaned.
    Clean the filter at the end of every
    drying cycle.

    Water container
    The indicator lamp lights up when the water
    container needs to be emptied.
    The drying cycle is automatically interrupted.
    Empty the container and restart the drying
    programme.
    Empty the water container after every
    drying cycle

    End
    The drying programme is finished.
    Please unload the dryer.

    Overdry protection / 6th Sense
    The indicator lights up when a humidity
    controlled programme is selected, to indicate
    the activated protection function.

    Dry plus
    By selecting this option you can increase the
    dryness level of the laundry.

    Gentle
    Selecting this option will reduce the drying
    temperature.
    This option cannot be selected when the
    option “Rapid” is selected.

    5

    5019 300 01367
    (Subject to technical modifications)






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Whirlpool AWB 721 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Whirlpool AWB 721 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,96 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Whirlpool AWB 721

Whirlpool AWB 721 Kurzanleitung - Deutsch - 5 seiten

Whirlpool AWB 721 Bedienungsanleitung - Deutsch - 12 seiten

Whirlpool AWB 721 Bedienungsanleitung - Englisch - 13 seiten

Whirlpool AWB 721 Kurzanleitung - Holländisch - 5 seiten

Whirlpool AWB 721 Bedienungsanleitung - Holländisch - 11 seiten

Whirlpool AWB 721 Kurzanleitung - Französisch - 5 seiten

Whirlpool AWB 721 Bedienungsanleitung - Französisch - 11 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info