Bedienungsanleitung Casio 5302 - GA-1000 (Seite 1 von 8) (Englisch)

624482

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Congratulations upon your selection of this CASIO watch.

Applications

This watch has built-in sensors that measure direction and temperature.

Measurement results are indicated by the watch's hands and displays. These features make this watch

useful when hiking, mountain climbing, or when engaging in other such outdoor activities.

Warning!

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

•

When engaging in mountain climbing or other activities in which losing your way can create a

dangerous or life-threatening situation, always use a second compass to conﬁ rm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

E E-1

ENGLISH

E-2

About This Manual

• Depending on the model of your watch, display text appears either as

dark ﬁ gures on a light background, or light ﬁ gures on a dark

background. All examples in this manual are shown using dark ﬁ gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-13) to conﬁ gure your Home City and

daylight saving time settings.

Important!

Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping

Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-15).

The watch is now ready for use.

E-4

Contents

E-2 About This Manual

E-3 Things to check before using the watch

E-7 Mode Reference Guide

E-12 Timekeeping

E-13 Conﬁ guring Home City Settings

E-13 To conﬁ gure Home City settings

E-14 To change the daylight saving time (summer time) setting

E-15 Conﬁ guring Current Time and Date Settings

E-15 To change the current time and date settings

E-18 Hand Home Position Adjustment

E-18 To adjust home positions

E-20 Using the Digital Compass

E-20 To perform a digital compass operation

E-23 To perform bidirectional calibration

E-25 To perform magnetic declination correction

E-26 To store a direction angle reading in Bearing Memory

E-29 To set a map and ﬁ nd your current location

E-30 To ﬁ nd the bearing to an objective

E-31 To determine the direction angle to an objective on a map and head in that direction

(Bearing Memory)

E-5

E-34 Taking Temperature Readings

E-34 To enter and exit the Thermometer Mode

E-34 To take temperature readings

E-36 To calibrate the temperature sensor

E-37 Specifying Temperature Unit

E-37 To specify the temperature unit

E-38 Checking the Current Time in a Different Time Zone

E-38 To enter the World Time Mode

E-38 To view the time in another time zone

E-39 To specify standard time or daylight saving time (DST) for a city

E-40 To swap your Home Time and World Time Cities

E-41 Using the Stopwatch

E-41 To enter the Stopwatch Mode

E-41 To perform an elapsed time operation

E-41 To pause at a split time

E-42 To measure two ﬁ nishes

E-43 Using the Countdown Timer

E-43 To enter the Countdown Timer Mode

E-43 To specify the countdown start time

E-44 To perform a countdown timer operation

E-44 To stop the alarm

E-6

E-45 Using the Alarm

E-45 To enter the Alarm Mode

E-46 To set an alarm time

E-46 To test the alarm

E-47 To turn an alarm and the Hourly Time Signal on and off

E-47 To stop the alarm

E-48 Illumination

E-48 To illuminate the display manually

E-48 To change the illumination duration

E-50 To enable or disable the auto light switch

E-52 Button Operation Tone

E-52 To enable or disable the button operation tone

E-53 Troubleshooting

E-57 Speciﬁ cations

E-7

Mode Reference Guide

Your watch has 7 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode E-12

• Determine your current bearing or the direction from your current

location to a destination as a direction indicator and angle value

• Determine your current location using the watch and a map

Digital Compass Mode E-20

Determine the temperature at your current location Thermometer Mode E-34

View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-38

Use the stopwatch to measure elapsed time Stopwatch Mode E-41

Use the countdown timer Countdown Timer Mode E-43

Set an alarm time Alarm Mode E-45

Operation Guide 5302

MO1409-ED

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5302 - GA-1000 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5302 - GA-1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info