Bedienungsanleitung Denon DN-X1700 (Seite 17 von 26) (Englisch)

614628

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Getting Started Connections Basic Operations Speciﬁ cations Troubleshooting

Effector Function Fader Start UtilityUSB

Setting the USB audio input

One of the two modes below is set using the USB

ASSIGN CH/MASTER

button for the USB audio input

assignment destinations.

The LED on the side corresponding to the mode

selected lights.

The USB audio input levels can be adjusted using

Utility settings. The adjustment values are stored on a

mode by mode basis.

q CH INPUT mode

Select this mode when mixing sound using only the DN-X1700

without using the mixer functions of the DJ software.

The USB audio input signals are assigned using the conﬁ guration

shown below.

USB channel 1 and 2 inputs

Input channel 1

USB channel 3 and 4 inputs

Input channel 2

USB channel 5 and 6 inputs Input channel 3

USB channel 7 and 8 inputs Input channel 4

w MASTER mode

Select this mode when using both the mixer functions of the DJ

software and the DN-X1700’s functions.

The USB audio input signals are assigned to the buses shown

below.

USB channel 1 and 2 inputs Master bus

USB channel 3 and 4 inputs Cue monitor bus

USB channel 5 and 6 inputs

Disabled

USB channel 7 and 8 inputs

Disabled

The mixer output of the DJ software is mixed in the buses using

the DN-X1700.

* Ensure that the audio output settings of the DJ software correspond

to the speciﬁ cations given above.

USB audio

This unit features a 24-bit 96 kHz USB audio input/output sound card

function which supports up to 8 channels (4 stereo systems). The

sampling frequency can be set to 44.1 kHz, 48 kHz or 96 kHz using a

Utility setting (factory setting: 96 kHz).

* When the unit is connected to a computer which runs Windows XP,

Vista or a similar operating system, install DENON DJ ASIO driver

Ver2 contained on the CD-ROM provided. If the Ver1 driver is already

installed, ﬁ rst uninstall it, and then install the Ver2 driver.

* Depending on the computer used, select the PC/MAC section

settings under System Setting among the Utility settings.

Selecting the USB mode

The respective functions given below are carried out in the operation

modes of the USB A terminal (USB host mode) and USB B terminal

(USB device mode).

USB A :

•

Preset data import/export function

•

Version upgrading

USB B :

•

USB audio interface function

•

USB MIDI interface function

The operation mode to be established when the unit's

power is turned on can be selected by a Utility setting.

(Factory setting: USB A)

To switch from USB A (host mode) to USB B (device mode):

Press the UTILITY/–USB A/USB B button for one

second.

Operation now transfers to the screen shown below.

Select OK/Cancel using the EFX SELECT control

(EFX2), and press the button to enter the selection.

The indicator changes from USB-A to USB-B, and the

device mode is established.

(* When a speci c period of time elapses with no

computer connected to the USB B terminal, the

indicator changes back to USB-A, and the host mode

is automatically selected.)

To select the host mode again, press the UTILITY/–USB

A/USB B button for one second, and select the settings

by following the same steps.

USB Settings

Setting the USB audio output

Any sound source of the 4 systems provided—1 to 4 input channels

(Pre EQ), mic input (Post Send VR), master output (Pre Limiter) or

REC output—can be selected as the USB audio output.

The USB audio output level can be adjusted using a Utility setting.

Press the UTILITY/–USB A/USB B button. The Utility

setting screen is displayed.

Using the EFX SELECT control (EFX2), select Audio

Setting USB Audio Setting Output Source

Select. One of the audio sources assigned to the USB

output channels is selected on the selection screen

displayed.

Press the UTILITY/–USB A/USB B button. The Utility

setting screen is closed.

USB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X1700 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-X1700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info