216264
61
Zoom out
Zoom in
Vorherige Seite
1/153
Nächste Seite
Calibration
To use Easy Interactive Function, you need to make sure you perform
calibration to align the pen position on the screen and the mouse position
on the projection screen with the Easy Interactive Pen.
There are two calibration modes: Calibrate (Normal) and Calibrate
(Advanced).
Specify 25 points with the Calibrate (Normal), and 49 points with the
Calibrate (Advanced).
Make sure you perform calibration the first time you use Easy Interactive
Function. After that, you only need to perform calibration if the usage
environment changes, for example if the connected computer is changed or
the projection area is changed.
Cases in which calibration is required
In the following cases, the positioning of the Easy Interactive Pen on the
projection surface and the mouse on the computer may be offset. When
position offset becomes a problem, perform calibration again.
When the computer's resolution is changed.
When a computer with a resolution that differs from the last time
calibration was performed is connected.
When Keystone is performed from the Settings Menu in the
Configuration Menu.
When Zoom is changed from the Settings Menu in the Configuration
Menu.
When Auto Setup is performed from the Signal menu in the
Configuration Menu.
When Resolution is changed from the Signal menu in the Configuration
Menu.
When Tracking is changed from the Signal menu in the Configuration
Menu.
When Sync. is changed from the Signal menu in the Configuration
Menu.
When Position is changed from the Signal menu in the Configuration
Menu.
When Aspect is changed from the Signal menu in the Configuration
Menu.
When input detection is performed automatically.
When position offset becomes a problem for other reasons.
q
If you set Projection to Rear/Ceiling from the Extended menu in the
Configuration Menu, Easy Interactive Function cannot be used
because the pen position and mouse position will not match.
The pen position and mouse position will not match while E-Zoom
is being used.
When you use Easy Interactive Function while images are projected
with EasyMP Network Projection (input source: LAN), set USB
Type B to Wireless Mouse or Off from the Extended menu in the
Configuration Menu.
Replacing the Batteries for the Easy Interactive
Pen
When the button is pressed, the indicator for the Easy Interactive Pen turns
on. If it does not turn on, the batteries are out of power and need to be
replaced. Have two AAA size alkaline batteries ready. For details on other
batteries that can be used, contact your local dealer or the nearest address
provided in the Support and Service Guide.
s Epson Projector Contact List
Attention
Make sure you read the separate Safety Instructions before handling the
batteries.
s
Safety Instructions
Easy Interactive Function (EB-460i/450Wi only)
61
61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

epson-eb-450w

Suche zurücksetzen

  • Wie funktioniert die Zufallswiedergabe bei Verwendung eines Sticks beim Epson EB -W80d? Eingereicht am 9-8-2018 20:48

    Antworten Frage melden
  • Beim Einschalten blinkt die grüne Lampe. Lampe wurde gewechselt und funktionierte. Lampenstundenzäher wurde auf 0 gesetzt. Welchen Grund? Eingereicht am 12-7-2017 09:45

    Antworten Frage melden
  • Lampe gewechselt, grüne Lampe blinkt und Beamer schaltet nicht ein Eingereicht am 12-7-2017 08:50

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson eb 450w wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson eb 450w

Epson eb 450w Installationsanweisung - Englisch - 21 seiten

Epson eb 450w Bedienungsanleitung - Holländisch - 158 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info