Bedienungsanleitung Jablotron JA-80Y (Seite 6 von 12) (Englisch)

555058

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

The JA-80Y GSM communicator - 6 - MFJ55304

5.4.1. Assigning events to be reported by SMS to a particular

mobile phone number

To link events to being reported by SMS, enter:

82 M ec x

where

M phone number memory 1 to 8

ec event code 01 to 32 (see the above table)

x 0 = no SMS report, 1 = SMS report

Example: if 82 8 03 1 is programmed and a fire alarm is triggered

(event 03 in the table), it will be reported by SMS to the phone number

stored in memory M8

5.4.2. Assigning events to be reported by phone call to a

particular phone number

To link events to being reported by phone call, enter:

83 M ec x

where

M phone number memory 1 to 8

ec event code 01 to 32 (see the above table)

x 0 = no phone call, 1 = call

Example: if 82 1 03 1 is programmed and a fire alarm is triggered

(event 03 in the table), the phone number stored in memory M1 will be

called and if the call is answered, a siren sound will be heard.

Notes:

 Phone call reports are mostly used as an audible notification to

alert the user of a detailed report sent by SMS

 If both SMS + call reports are enabled for events, the SMS is sent

first and then the number is called afterwards. But total priority is

given to ARC reports if enabled (see 7.1 )

5.5. SMS text editing

The communicator contains various text strings which are used to

create SMS reports and also SMS instruction text. Language of the

text can be set – see 5.1. These text strings cannot be changed from

the system keypad, but they can be edited by Comlink software, via

the Internet (www.GSMLink.cz

) or by sending the following SMS

instruction:

code_TXT_n,text,n,text,......n,text

where

code is a valid access code (e.g. factory defaults: 8080, 1234)

_ is a space

TXT instruction to edit texts

n text number (0 to 611 see the following table)

, comma (or full stop)

text the new text (max. 30 characters) which will replace the

former text. It is invalid to enter a comma or a full stop inside

the text string, but a space is valid within the text string

Notes:

• A single TXT instruction can change multiple texts (limited only by

the maximum length of a single SMS)

• the communicator is not case-sensitive and it is recommended to

use only English ASCII characters (some networks do not support

non-English national characters)

• the communicator creates SMS reports with 5 parts: installation

name, event description, source (code or device) number (01 to 50),

source name, time and date

• the maximum possible length of an ASCII SMS is 160 characters

(only 70 characters for national characters). If this length is

exceeded, the report is sent as multiple SMSes

Examples: if the service code is 8080 then the SMS instruction:

8080 TXT 20,key fob Bob,21,Key fob Jane

changes the description (name) of the key fobs enrolled to addresses

20 and 21

8080 TXT 605,heating on,606,heating off

edits the text of the two instructions used to command the heating to

be switched on and off by the PGX output (the PGX output must be

programmed to have an ON/OFF function)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron JA-80Y Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron JA-80Y

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info