ICE CREAM MAKER GELA TO “GELA TISSIMO”
ABOUT THE USE
USING THE FIXED BOWL
making are also to be expected and in no way affect
the unit's normal functioning. In case the ice cream
The appliance is sold complete with all the
become too hard, the motor stops by itself . A safety
accessories for use with fixed or removable bowl. In
device protects the motor from possible damages.
the original package, the removable bowl is stored
Should not the motor begin to work again, wait till
inside the fixed bowl.
the motor cools.
IMPORT ANT
Keep the appliance far enough from walls and
Hygiene is the most impor tant aspect of ice cream
furniture, which might restrict air circulation,
making. Make sure all the par ts, in par ticular those
necessar y for cooling the unit. It is nor mal for warm
coming in direct contact with the ice cream, are
or hot air to flow from the lateral air vents. The
scr upulously clean.
refrigeration process requires this.
Never tur n off the freezing switch (L) when the
machine is working. In case you accidentally
1). Carefully clean all par ts in direct contact with
switch it off or the power fails, wait at least 10
ingr edients. W arni ng: make su re unit is
minutes before turning it on again. The compressor
unplugged before star ting cleaning.
is fitted with a safety device to prevent any possible
2). Inser t the mixing paddle (B) securely into the
damage to the motor unit. Should you restar t the
drive shaf t in the fixed bowl.
machine immediately after it has been switched off ,
the compressor will not freeze.
3). Lo ck t he p add le i n pl ace by s cre win g
(clockwise) the knob (C) over the shaf t.
The paddle movement and the freezing plant are
indipendent: the (L) button turns ON and OFF the
4). Press the (L) switch to star t the cooling. Pre-
refrigeration and the (M) button turns ON or OFF the
cool the machine for 5 minutes.
mixing paddle. T o stop the machine, press both (M)
5). Press (M) switch to star t the mixing paddle.
and (L) buttons. Af ter the machine has been
6). P our the mixture into the bowl. F or best results, it
switched off , wait approximately 10 minutes before
is suggested to pre-mix ingredients in a separate
making another ice cream.
bowl so as to obtain a smooth, lump-free
V ariations in speed and noise during ice-cream
mixture. Always use ingredients at fridge
•
•
•
•
•
English English
5 4
IMPORT ANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be obser ved, including the
following:
Read all instr uctions carefully .
T o protect against risk of electric shock, do not put the main body of appliance in water or any other
liquid.
Close super vision is necessar y when any appliance is used by or near children.
Unplug from outlet when not in use, before putting on or taking off par ts, and before cleaning.
Avoid contact with moving par ts.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is
dropped or damaged in any manner . Return the appliance to an authorized Ser vice Center for
examination, repair or electrical or mechanical adjustment.
The use of attachments not recommended or sold by the appliance manufacturer may result in fire,
electric shock or injur y .
Do not use outdoors.
Do not let cord hang over edge of table or counter , or touch hot sur faces.
SAVE THESE INSTRUCTIONS
CAUTION
An authorized ser vice representative should per form any servicing other than cleaning and user
maintenance. Authorized service personnel only should do repair .
Check that the voltage shown on the rating plate cor responds to the voltage of the mains.
Do not use sharp utensils inside the bowl! Sharp objects will scratch and damage the inside of the bowl. A
r ubber spatula or metal spoon may be used, when the appliance is in the “OFF”or “0” position.
Never clean with scouring powders or hard implements.
Do not place or use the appliance on hot sur faces, such as stoves, hotplates, or near open gas flames.
Do not put any par t in the dishwasher .
Do not unplug the unit by pulling on the cord.
IMPORT ANT :
This Ice Cream Machine contains its own refrigerant which must be allowed to settle after transpor t.
Leave the Ice Cream Machine on a horizontal surface for at least 12 hours after purchase or after any
move which might have stored the machine the wrong way up.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Af ter removing the appliance from the packaging, check it for damage. If in doubt, do not use the appliance
and contact an authorised service centre.
Plastic bags, polystyrene, nails, etc. must not be left within reach of children as they are potentially
dangerous.
The appliance's manufacturer and vendor reject any responsibility for failure to comply with the instructions
provided in this user manual.
The appliance must be connected to an electrical system and power supply socket with a minimum capacity
of 10A , equiped with an efficient ear th contact. The manufacturer is not responsible for damages to things
or people in the event that the prescribed safety nor ms have not been respected.
Before carr ying out any maintenance or cleaning operations, make sure that the appliance has been
disconnected from the electrical mains by removing the plug from the power supply socket.
Never wash the appliance using water jets or place it in water!
Leave at least 20 cm on each side of the machine to allow free air circulation. Make sure the vent slots
are free and unobstructed.
UK USERS ONL Y
HOW TO CONNECT THE CORD TO A U.K. PL UG: IMPORT ANT
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow: Ear th
Blue: Neutral
Brown: Live
Please, read the instr uctions given below before connecting the cord to a plug. If
in doubt, please, consult a qualified electrician. As the colours of the wires in the
mains lead of this appliance may not correspond with the coloured markings
identifyng the ter minals in your plug, proceed as follows: the wire that is coloured
Green and Y ellow must be connected to the terminal in the plug which is marked
with the letter E or the Ear th symbol (G), or coloured Green or Green and Y ellow .
The wire that is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured R ed. The wire that is coloured Blue must be
connected to the terminal which is marked with the letter N or coloured Black.
SAFETY POINTS FOR REWIRABLE OR MOULDED PLUG
The mains lead of this appliance may be already fitted with a BS1363 13A plug.
If your socket outlet is not suitable for the plug, then the plug must be removed (cut off if it is a moulded on plug), the
flexible cord insulation should be stripped back as appropriate and a suitable 3 pin plug fitted.
WARNING: Dispose of a plug that has been cut from the power supply cord, as such a plug is hazardous if inser ted in
a live 13A socket outlet elsewhere in the house.
Should the fuse need to be replaced an AST A marked fuse, approved to BS 1362, of the same rating must be used.
Always replace the fuse cover after fitting a fuse. The plug must NOT be used if the cover is omitted or lost until a
replacement is obtained. Make cer tain that only the correct fuse cover is used and fitted.
For plugs with detachable fuse cover , the replacement must be the same as the colour inser t in the base of the plug, or
as directed by the embossed wording on the base of the plug.
If the detachable fuse cover is lost a replacement may be purchased from a Service Centre.
Information for supply may also be obtained from the plug manufacturer .
•
•
•
•
•
•
•
•
•
•