Bedienungsanleitung Synq DMC-1000 (Seite 4 von 72) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

468032

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH OPERATION MANUAL

SYNQ

3/139 DMC1000

 When the power switch is in OFF position, this unit is not completely disconnected from the mains!

 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user

serviceable parts inside.

 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same

type and electrical specifications!

 In the event of serious operating problems, stop using the appliance and contact your dealer immediately.

 Please use the original packing when the device is to be transported.

 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

INSTALLATION GUIDELINES:

 Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights,

etc. will affect its performance and may even damage the unit.

 Take care to minimize shocks and vibrations during transport.

 When installed in a booth or flight case, please make sure to have good ventilation to improve heat

evacuation of the unit.

 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance.

 Choose the place where you put your installation very carefully. Avoid presence of heat sources. Avoid

places with vibrations or places that are dusty and humid.

 The player will work normally when installed on a surface with max. 15° inclination.

 Be very careful while handling CDs, do not touch them with wet or dirty hands.

 Discs that are dirty must be cleaned with special designed cloth and cleaning products.

 Do not use CDs that are badly damaged (scratched or deformed) they can damage your appliance.

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

 In order to prevent electric shock, do not open the top cover. If a problem occurs, contact your dealer.

 Do not place metal objects or spill liquid inside the CD player. Electric shock or malfunction may result.

 This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is

recommended to use this in a room of 5°C – 35°C.

 The compact disc player should not be adjusted or repaired by anyone except properly qualified service

personnel.

 This unit may cause interference to radio and television reception.

CLEANING THE CD-PLAYER:

Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not

use volatile liquids such as benzene or thinner which will damage the unit.

CONTROLS AND FUNCTIONS

1. MAINS input: connect the CD player to the 100-240V AC mains, using the supplied power-cord.

2. POWER ON/OFF switch: switches the CD-player on and off.

3. FADER START Socket: If you are using a mixer with fader start function, connect the player with the

fader start of the mixer. You can connect the fader start inputs of the 2 decks if you want to use the

“relay play” function, also check the chapter “how to use”. Please note that these sockets must never be

connected with any voltage.

ENGLISH OPERATION MANUAL

SYNQ

4/139 DMC1000

4. AUDIO output: Output for the audio signal from the CD-player. Use the supplied cinch/cinch cable to

connect this output to a CD/line input of your mixing unit.

5. DIGITAL OUT socket: Use this connector to connect the digital signal (S/PDIF format) to the input of a

digital amplifier or digital recorder (ex. Mini disc)

6. HEADPHONE output: if you like you can connect your headphone here.

7. HEADPHONE VOLUME: controls the sound level of the headphone output.

8. USB 2 connection: this is the second (type-A) USB-connection, used to connect any USB mass storage

device that was formatted in FAT or FAT32. By default this input is used to connect a hard disk which

can be linked to the second deck. (see chapter “connections”)

9. MIDI / LINK USB connection: this (type-B) USB-connection is used to connect the player:

 To a computer with MIDI DJ-software

 To another deck for “hard disk sharing”

Please check the chapter “connections” for more information.

10. USB 1 connection: this is the first (type-A) USB-connection, used to connect any USB mass storage

device that was formatted in FAT or FAT32. By default this input is used to connect an occasional USB-

drive like USB-sticks etc.

11. SOURCE SELECT switch: use this button to select the desired audio source: CD, USB1 or USB2. If the

MIDI/LINK connection (9) is set to work in MIDI mode, you can press the SOURCE SELECT switch for

about 2seconds: the unit will now act as a full featured MIDI controller. (see the chapter “MIDI

OPERATION” for more information)

12. CD EJECT button: press this button to eject the inserted CD. To prevent the CD from being ejected by

accident, this button is disabled during playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Synq DMC-1000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info