478469
53
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
51FTM-10R OPERATING MANUAL
MESSAGE FEATURE
Cloning
1. Bring the Source Transceiver and the Destination Transceiver as close to each other as
possible.
2. Press the top panel’s PTT key on the Source Transceiver.
While transmitting the clone data, the Source Transceivers
LED blinks red and blinks the “SENDING” notation on the
LCD.
When clone data has finished transmitting, the Source
Transceiver’s LED blinks white for around 3 seconds and
then displays “ALL” and “SENT OUT” on the LCD. Then,
the “TX CLONE” notation and the Club Channel frequency
appears on the display alternately again.
To finish the Cloning, turn the radio off by pressing and holding the
[
POWER
]
key for
two seconds.
3. The Destination Transceiver does not require any set -up operation.
4. When receiving cloning data from the “Source Transceiver”, the “Destination Trans-
ceiver” automatically stores all the data, and the LED blinks white for 3 seconds, then
displays “ALL” and “RECEIVED” on the LCD. Then, the
“Destination Transceiver” turns off automatically, and turns
on again. The radio returns to normal operation in the VFO
or memory mode, as before the Clone operation began. The
copy/clone procedure is completed.
If “ERROR” is displayed on the LCD screen while doing the Clone procedure, the clon-
ing process was not successful. In this case, turn the radio off and retry the cloning
procedure. In the case of repeated cloning failures, see the following information.
The distance of the transceivers (source transceiver and Destination Transceiver) has to
be close.
Check any equipment in the area that may be generating electrical noise. This may
interrupt data transfer.
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-10R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info