478469
54
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
52 FTM-10R OPERATING MANUAL
CHANGING THE CLUB CHANNEL FREQUENCY
By factory default, the 439.900 MHz (EXP Version:433.500 MHz) frequency is stored in
the Club Channel. If you wish to change the Club Channel, perform the following steps.
ADVICE: For the “Club Channel”, any frequency in the 144 MHz or 440 MHz amateur
bands can be programmed. However, the Message Clone function and the Clone
function can work only on the 440 MHz band. When these functions are used,
select the 440 MHz band.
1. Press the front panel / key to recall the Group
Memory Bank (“GRP” notation appears at the upper left
corner in the display for a moment).
When the display indicates the Clock, Stop Watch Timer,
or Temperature, press the
[
VOL/SEL
]
key to change the VFO or memory mode, then
perform the above selection.
2. Rotate the DIAL knob to select the Club Channel (The “CLB
notation appears at the upper left corner in the display for
two seconds, then changes to the “GRP” notation).
3. Press and hold the key for one second to enter the Club
Channel Customization mode.
4. Rotate the DIAL knob to select Menu Item “C1 CLUB FRQ”.
5. Press the key momentarily, to display the current memo-
rized frequency of the Club Channel and the “SET” nota-
tion will be blinking.
6. Press and hold the key for one second to enable the changing of the Club Channel
frequency.
The blinking “SET” notation changes to the blinking “CLB” notation.
7. Rotate the DIAL knob to select the desired Club Channel frequency.
You may change the operating band (430 MHz to 144 MHz, or vice versa) by pressing
the front panel / keys.
8. Press and hold the key for one second to save the new Club Channel frequency.
The blinking “CLB” notation returns to the blinking “SET” notation.
9. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
MESSAGE FEATURE
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-10R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info