ISOFIX Anchor Points
WARNING
Use an anti-rotation device when
using the ISOFIX system. We
recommend the use of a top tether
or support leg.
Note: When you are purchasing an ISOFIX
seat, make sure that you know the correct
mass group and ISOFIX size class for the
intended seating locations. See Child Seat
Positioning (page 18).
Your vehicle has ISOFIX anchor points that
accommodate universally approved
ISOFIX child seats.
The ISOFIX system comprises two rigid
attachment arms on the child seat that
attach to anchor points on the outboard
rear seats, where the cushion and backrest
meet. Tether anchor points are located
behind the outboard rear seats for child
seats with a top tether.
Top Tether Anchor Points
Attaching a Child Seat with Top
Tethers
WARNINGS
Do not attach a tether strap to
anything other than the correct
tether anchor point.
Make sure that the top tether strap
is not slack or twisted and is properly
located on the anchor point.
Note: Where applicable, remove the
luggage cover to ease installation. See
Luggage Covers (page 122).
Note: You may need to raise or remove the
head restraint to ease installation. See
Head Restraints (page 83).
1. Route the tether strap under the head
restraint to the anchor point.
2. Push the child seat back firmly to
engage the ISOFIX lower anchor points.
3. Tighten the tether strap in line with the
child seat manufacturer's instructions.
17
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Child Safety
