524129

Miele CVA 6431 Nespresso Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
CLEANING AND CARE / DESCALING
TIPS FOR USE
SETTINGS
M.Nr. 09 550 160
SettingsTips for useCleaning and care Descaling
Warning. Ensure that any spillages or
splashes of descaling agent are wiped up
immediately as these could cause damage
to delicate surfaces and natural flooring.
Only use Miele descaling tablets. Other
descaling tablets will damage the coee
machine and aect the taste.
Descaling takes approx. 12minutes.
You will need
– the red descaling funnel and
– Miele descaling tablets (2 for each
descaling process).
Descaling cannot be cancelled once it has
started. The process has to be carried
through to the end.
ĺ Touch . Next, select "Descale" and
confirm with "OK".
The descaling process will now start.
ĺ Follow the instructions in the display.
ĺ Fill the water container with lukewarm
water up to mark and drop 2 Miele
descaling tablets in it. Replace the water
container.
Follow the instructions on the packet for
the mixing ratio carefully. It is important
that you fill the water container with the
correct amount of water (not less or more),
otherwise descaling will be cut short and
must then be repeated.
When "Remove capsule plate. Insert
descaling funnel and close the door"
appears,
ĺ remove the capsule plate and replace it
with the red descaling funnel.
TIP: Place the waste container under the
central spout and the steam valve.
When "Rinse the water container and
fill with fresh water up to the symbol"
appears,
ĺ remove the water container and rinse it
carefully with clean water.
Make sure that no descaling agent is left in
the water container.
Descaling is finished when "Empty the
drip tray and clean the contacts. Process
finished" appears.
Capsule plate
The capsule plate should be cleaned once
a month using the cleaning tablets supplied
with the machine, or at the latest, when the
machine is descaled.
ĺ Open the front of the machine.
ĺ Press on the handle a and pull the
capsule plate forwards to remove it.
ĺ Fill a small container with hot water and
dissolve one cleaning tablet in it.
ĺ Place the capsule plate in the cleaning
solution and leave for approx. one hour.
ĺ Once all the coee remains have been
removed, rinse it thoroughly and dry it.
ĺ Push the capsule plate back into the
machine until it clicks into place.
Cappuccinatore
The lid of the cappuccinatore can be
dismantled for cleaning. It is best to clean
the cappuccinatore in the dishwasher if
possible - all parts are dishwasher safe.
ĺ Dismantle the cappuccinatore lid.
Remove the spout and the valve.
The valve can only be removed when the
dot is in the middle position between the
"Hot milk" symbol } and the "Milk froth"
symbol {.
ĺ Reassemble the parts of the lid as
shown.
Allocating the types of coee
(Type allocation)
You can store five dierent types of coee in
this machine (e.g. for five dierent users with
dierent tastes).
When the coee machine is switched on
and the carousel runners are pulled out, the
types of coee in the chambers are shown
in the display.
Calling up "Type allocation"
ĺ Touch and call up "Type allocation".
ĺ Select the chamber you want.
For this chamber you can now:
Select type
The tick indicates which type of coee is
currently allocated to the selected chamber.
Allocate type
Enter
characters
Select with the arrows +
OK
Save
entry
Select with the arrows +
OK
Delete
characters
Sensor
If you have already allocated a chamber with
a type of coee yourself you can change
(change type) or delete it (delete type).
Changing the portion sizes
ĺ Touch one of the drink sensors Espresso,
Coee or Long coee until "Change"
appears in the display.
or
ĺ Touch . Select "Portion size" and
confirm with OK.
ĺ Select the drink you want and confirm
with OK.
The desired drink will be made and "Save"
will appear in the display.
When the cup has been filled to the level
you want,
ĺ press OK.
You can cancel portion size programming as
long as "Stop" is visible in the display.
Changing settings
ĺ Touch .
ĺ Select the option you want, and confirm
your selection with OK.
Options which are currently selected will
have a tick next to them.
ĺ Change the setting using the arrow
sensors.
ĺ Touch the OK sensor to save the setting.
Touch to return to the previous menu.
Option Available settings Notes
Language Deutsch, English and other languages
Country
The Language setting can be identified by the flag symbol .
Set the date Year / Month / Day
Time of day Display (On / O / Night dimming)
Clock format (12 h / 24 h)
Your choice of display will aect the energy consumption of your coee machine. A message about this will
appear in the display.
Timer Timer 1 (switch on at, switch o at, switch o
after)
Timer 2 (switch on at, switch o at)
For "switch on at" and "switch o at", the timer must be activated and at least one day of the week must
be allocated.
Type allocation Chambers 1-5 (Select type / Allocate type /
Change type* / Delete type*)
* You can only change or delete the type of coee for those types allocated in addition to the default type.
Portion size Espresso
Coee
Long coee
Eco mode On / O
Lighting Brightness (machine switched on or switched
o)
Switch o after
To switch o the lighting touch the arrow sensor until no segments are filled and "Switched o" appears.
Info No. of drinks, No. of uses until descaling
System lock On / O When the system lock is activated, the "Switch on at" option for the timer will not work.
Water hardness Soft, Medium, Hard, Very hard
Display brightness Set
Volume Buzzer tones
Keypad tone
To switch o the tone, touch the arrow sensor , until no segments are filled and "Switched o" appears.
Showroom programme Demo mode (On / O) Only for demonstration purposes in showrooms or exhibitions. Do not activate this setting for domestic
use!
Factory default Reset
Do not reset
Profiles
You can create individual profiles and save
the portion sizes for Espresso, Coee and
Long coee for each profile.
The name of the current profile is shown in
the top left of the display.
Calling up a profile
ĺ Touch .
The sensor will light up.
Creating a profile
Enter
characters
Select with the arrows +
OK
Save
entry
Select with the arrows +
OK
Delete
characters
Sensor
If you have already created a profile, you
also have the following options:
– Select profile
– Change name
– Delete profile
– Change profile
(The options are:
Manually
After each use
When switched on)
Quick start guide
Built-in coee machine
This Quick start guide does not replace the Operating and installation instructions.
It is essential to read the Operating and installation instructions to familiarise yourself
with how to use the coee machine before using it for the first time. Please pay particular
attention to the Warning and safety instructions.
en - GB
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

miele-cva-6431-nespresso

Suche zurücksetzen

  • Der Entkalkungstrichter lässt sich nach dem Entkalkungsvorgang nicht entfernen Eingereicht am 10-11-2022 14:26

    Antworten Frage melden

  • Miele Nespressokaffeeautomat 6431
    lässt sich nicht anschalten Eingereicht am 21-9-2019 12:29

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele CVA 6431 Nespresso wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Miele CVA 6431 Nespresso

Miele CVA 6431 Nespresso Kurzanleitung - Deutsch - 2 seiten

Miele CVA 6431 Nespresso Bedienungsanleitung - Deutsch - 76 seiten

Miele CVA 6431 Nespresso Bedienungsanleitung - Englisch - 76 seiten

Miele CVA 6431 Nespresso Bedienungsanleitung - Holländisch - 76 seiten

Miele CVA 6431 Nespresso Bedienungsanleitung - Französisch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info