649229

Silvercrest SBR 3.0 A1 - IAN 106958 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
Prior to use
Take the SBR 3.0 A1 (A) and the accessories out of the package and remove the plastic packaging.
The SBR 3.0 A1 (A) must be fully charged before using it for the first time.
Charging the Bluetooth
®
audio transmitter/receiver
To charge the internal battery of the SBR 3.0 A1 (A), connect the micro USB socket (7) via the
supplied USB charging cable (C) to the USB power supply. Insert the USB power supply into a socket
that is always easily accessible. The red LED (3) lights up while charging and goes out when the
battery is fully charged.
Explanation of the RX and TX modes and possible uses
The SBR 3.0 A1 (A) can be used in the following two modes:
1. As receiver in RX mode
In this mode, for example, you can play audio signals from your smartphone via a Bluetooth
®
connection on your stereo system, which you have already connected to the SBR 3.0 A1 (A) via the
supplied RCA cable (B). Other possible playback devices include, for example, TV or active speakers.
WARNING! Never operate the SBR 3.0 A1 in conjunction with wired headphones.
The use of wired headphones may create harmful sound pressure.
In RX mode, it is imperative that the devices from which the audio signals are transmitted have a
Bluetooth
®
function.
The many possible uses of the SBR 3.0 A1 depend on the devices which you want to connect. For
further details, please read the operating instructions for your devices.
2. As transmitter in TX mode
In this mode, for example, you can wirelessly transmit audio signals to a Bluetooth
®
headset or
Bluetooth
®
loudspeaker from an audio source (for example, TV, stereo system, MP3 player) which
itself does not have Bluetooth
®
and which you have already connected to the SBR 3.0 A1 via one of
the supplied cables (B, D).
In TX mode, it is imperative that the devices to which the audio signals are to be transmitted have a
Bluetooth
®
function.
The many possible uses of the SBR 3.0 A1 depend on the devices which you want to connect. For
further details, please read the operating instructions for your devices.
The LED indicators and their meaning
Status of LED indicator Meaning
Blue LED (2) flashes twice power-on procedure
Blue LED (2) flashes three times power-off procedure
Blue LED (2) flashes rapidly and continuously pairing mode (connecting)
Blue LED (2) flashes approx. once per second connection is restored
Blue LED (2) on connected
Blue LED (2) off standby
Red LED (3) on battery is charging
Red LED (3) flashes five times (at one minute intervals) battery capacity low
Red LED (3) off (when connected to power supply) battery fully charged
Green LED (4) on TX mode
Yellow LED (5) on RX mode
First use
Please note that the range of a Bluetooth
®
connection is restricted. The distance
between transmitter and receiver should thus be 10 metres at most.
To restart the device from standby mode, keep the button (1) pressed for approx. two
seconds.
RX mode (receiver mode)
Device was already connected to a Bluetooth
®
device:
If you slide the mode selection switch (6) to the RX position, the device tries for approx. 300 seconds
to connect to the known Bluetooth
®
device and then switches to standby mode. Press the button (1) to
try to connect again for approx. 300 seconds.
If the wireless connection is interrupted during operation, the device tries for approx. 300 seconds to
restore the connection and then switches to standby mode. Press the button (1) to try to connect again
for approx. 300 seconds.
Insert the 3.5mm jack plug of the supplied RCA cable (B) into the Audio Out socket (8) of the SBR
3.0 A1. Then connect the red plug of the RCA cable (B) to the right RCA audio input and the
white plug to the left RCA audio input of your playback device (for example, stereo system, TV).
Your audio source must have an RCA audio input.
Device was not yet connected to a Bluetooth
®
device:
If you slide the mode selection switch (6) to the RX position, the device switches to pairing mode until it
is connected or switched off.
Slide the mode selection switch (6) to the RX position. The yellow LED (5) lights up. The pairing
mode is now activated and the blue LED (2) flashes rapidly and continuously.
If you are asked for a PIN during the pairing process, enter "0000".
Activate the Bluetooth
®
function on your smartphone and start searching for Bluetooth
®
devices.
You will recognise the Bluetooth
®
audio transmitter/receiver SBR 3.0 A1 by its name "SBR 3.0
A1" in the list of devices which are found. Select it and establish the connection.
Once the connection is established, the blue LED (2) lights up continuously.
You can now listen to music files stored on your smartphone via the connected playback device.
For further details, please read the operating instructions for your playback devices.
TX mode (transmitter mode)
Device was already connected to a Bluetooth
®
device:
If you slide the mode selection switch (6) to the TX position, the SBR 3.0 A1 tries for approx. 300
seconds to connect to the known Bluetooth
®
device and then switches to standby mode. If you now
press the button (1), the SBR 3.0 A1 switches to pairing mode for approx. 300 seconds and tries to
connect to a new device.
If the wireless connection is interrupted during operation, the device tries for approx. 300 seconds to
restore the connection and then switches to standby mode. Press the button (1) to try to connect again
for approx. 300 seconds.
Connect the headphone socket of your audio source (for example, TV, stereo system, MP3
player) via the audio cable (D) to the Audio In socket (9) of the SBR 3.0 A1. If your audio source
has a 6.3mm headphone socket, also use the adapter (F). Attach it first to a plug of the audio
cable (D) and then insert it into the headphone socket of your audio source.
Alternatively, you can also connect your audio source via the RCA cable (B) to the SBR 3.0 A1
(A). Your audio source must have an RCA audio output. Then connect the red plug of the RCA
cable (B) to the right RCA audio output and the white plug to the left RCA audio output of your
audio source. Insert the 3.5mm jack plug of the RCA cable (B) into the Audio In socket (9) of the
SBR 3.0 A1.
For further details, please read the operating instructions for your audio source.
Device was not yet connected to a Bluetooth
®
device:
If you slide the mode selection switch (6) to the TX position, the device switches to pairing mode for
approx. 300 seconds and then switches to standby mode. Press the button (1) to start pairing mode
again for approx. 300 seconds.
Now slide the mode selection switch (6) to the TX position. The green LED (4) lights up. The
pairing mode is then activated for approx. 300 seconds and the blue LED (2) flashes rapidly and
continuously.
Also switch your Bluetooth
®
playback device (for example, BT headphones or BT loudspeakers)
to pairing mode.
For further details, please read the operating instructions for your Bluetooth
®
playback device.
The two devices in pairing mode (SBR 3.0 A1 and Bluetooth
®
playback device) then establish a
Bluetooth
®
connection. When the connection is established, this is indicated by the constant
lighting of the blue LED (2) on the SBR 3.0 A1 (A).
When the Bluetooth
®
connection is established, the audio signals of your audio source are
transmitted wirelessly to your playback device and are then played by it.
Resetting the SBR 3.0 A1
To reset the SBR 3.0 A1 (A) and delete the previous connections, slide the mode selection switch (6) to
the RX or TX position. Now keep the button (1) pressed for approx. 5 seconds until the green LED (4)
and the yellow LED (5) flash three times at the same time. The SBR 3.0 A1 is then in pairing mode
again. Please note that resetting the SBR 3.0 A1 deletes both the TX and RX connections.
Storage when not in use
You should recharge the battery regularly if you do not use the device for a prolonged
period of time. This will maintain the performance of the battery.
Store the device in a dry, cool location.
Troubleshooting
The transmission of the audio signal does not work or only poorly
Make sure that the SBR 3.0 A1 (A) and the audio source or playback device are not too far
apart.
Make sure that the SBR 3.0 A1 (A) and the audio source or playback device are connected.
Make sure that the correct socket (Audio In /Audio Out) is used.
Check whether the internal battery is charged. Charge it if necessary.
Check whether the mode selection switch (6) is in the correct position.
Check the volume setting of the playback device.
Check all cable connections.
Environmental and disposal information
When the crossed out wheelie bin symbol appears on a product, this indicates that the
product is subject to the European Directive 2012/19/EU.
All old electrical and electronic devices must be separated from normal household waste
and disposed of at designated state facilities. The correct disposal of old devices in this
manner will prevent environmental pollution and human health hazards.
For further information about proper disposal, contact your local authorities, waste disposal office or
the shop where you bought the device.
The built-in battery cannot be removed for disposal.
Dispose of the packaging in an environmentally compatible manner. Cardboard can be put out for
municipal paper collections or brought to public collection points for recycling. Films and plastic used
for packaging the device are collected by your local disposal services and disposed of in an
environmentally compatible manner.
Conformity information
This device meets the basic requirements and other relevant regulations of the EMC
Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC, the R&TTE Directive
1999/5/EC, the ERP Directive 2009/125/EC and the RoHS Directive 2011/65/EU.
The complete EU Declaration of Conformity is available on request at:
ce@targa.de
Warranty and servicing advice
Warranty of TARGA GmbH
This device is sold with three years warranty from the date of purchase. Please keep the original
receipt in a safe place as proof of purchase. Before using your product for the first time, please read
the enclosed documentation. Should any problems arise which cannot be solved in this way, please
call our hotline. Please have the article number and, if available, the serial number to hand for all
enquiries. If it is not possible to solve the problem on the phone, our hotline support staff will initiate
further servicing procedures depending on the fault. Within the warranty period the product will be
repaired or replaced free of charge as we deem appropriate. No new warranty period commences if
the product is repaired or replaced. Consumables such as batteries, rechargeable batteries and lamps
are not covered by the warranty.
Your statutory rights towards the seller are not affected or restricted by this warranty.
Service
Phone: 020 – 70 49 04 03
E-Mail: service.GB@targa-online.com
Phone: 01 - 4370121
E-Mail: service.IE@targa-online.com
Phone: 027 78 11 03
E-Mail: service.MT@targa-online.com
Phone: 02 – 20 09 025
E-Mail: service.CY@targa-online.com
IAN: 106958
Manufacturer
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

silvercrest-sbr-3.0-a1---ian-106958

Suche zurücksetzen

  • SBR 3.0 A1 hat keinen Taster wie soll das Gerät zurückgesetzt werden? Eingereicht am 12-12-2023 17:29

    Antworten Frage melden

  • Blaues Licht blinkt ununterbrochen, lässt sich nicht verbinden. Was tun? Eingereicht am 29-9-2018 12:29

    Antworten Frage melden

  • Hallo

    Ich kann den SBR mit den Handy Koppeln. Wenn ich aber eine Musikdatei über Bluetooth
    wiedergeben will findet er das Gerät nicht. Was mach ich falsch
    Eingereicht am 19-1-2018 10:41

    Antworten Frage melden

  • Wie schließt man am TV Fernseher an bite Bilder zeigen
    Bilder
    Eingereicht am 22-9-2017 13:31

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SBR 3.0 A1 - IAN 106958 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info