Bedienungsanleitung Cambridge Audio Azur 851C (Seite 7 von 16) (Englisch)

497439

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

851Cazur

ENGLISH

Remote control

The 851C is supplied with an Azur Navigator remote

control handset that duplicates the front panel control

functions and is also able to control Azur series ampliers.

The supplied AAA batteries must be tted before the

remore control can be used.

The Azur handset buttons function as described in the

following paragraphs.

Standby/On

Switches the 851C between On and Standby modes.

Open/Close

Opens and closes the CD drawer.

- , Numerics

Enable direct CD track selection. Press the number of

the desired track to begin playback from the beginning.

To select a track number greater than ten, press the -/--

button followed by the track number.

Display

Alters the brightness of the 851C display backlight. There

are two brightness levels and an option to switch-off the

backlight.

Play / Stop / Pause

Press the relevant button to play, stop or pause a CD.

Note: Depending on the audio software installed on the

host personal computer, the Play and Pause buttons may

also be able to control USB audio playback.

Skip

Right Skip () – Press once to skip forward by one track

on the CD. Press and hold to skip forwards through tracks.

Left Skip () – Press once to skip backward by one track

on the CD. Press and hold to skip backwards through

tracks.

Note: Depending on the audio software installed on the

host personal computer, the Skip buttons may also be

able to control USB audio playback.

Scan Right

Press and hold to search while a CD is playing to search

forwards.

Scan Left

Press and hold to search while a CD is playing to search

backwards.

Press to enter 851C's setup menus. Various 851C

operating parameters can be congured.

Select

Press to toggle through the ve 851C input options. Within

the Setup menus, press to accept the parameter or option

highlighted in the display menu.

Program, Remain, Repeat,

Random

Read the ‘Operating Instructions’ section of this manual

for information on the functions of these buttons.

Filter

Press to toggle through the three 851C digital lter options.

Information

Press to display any additional 851C input signal information available.

The following buttons are used to control Cambridge

Audio Azur range ampliers only (such as the matching

851A) or when the 851C has been set to preamp mode

(Digital Volume Enabled).

Volume Up/Down

These buttons enable the amplier volume adjustment for

suitable Cambridge Audio Azur range ampliers.

Note: If the 851C Digital Volume feature is enabled, the

handset volume buttons will affect the signal output level

from the 851C. Refer to section ‘Operating instructions’

for more information.

Source

Press to toggle through the amplier inputs.

Mode

Press to toggle between amplier volume and balance

control using the volume up

and down buttons.

Speaker A/B

Press to switch between the twin speaker outputs on

Cambridge Audio Azur ampliers with this facility.

Mute

Press to mute the output on Cambridge Audio Azur

ampliers. If the 851C Digital Volume feature is enabled,

this button will mute/unmute the output of the 851C

instead.

The Filter indicator will ash when mute is engaged. Press

Mute again to restore output.

Inputs

Used to select sources on matching CA Azur ampliers.

Apple device compatibility

The Azur 851AC Navigator remote control can control

the basic functions of Apple devices such as Apple TV

and Apple’s iPod/iPhone/iPad range when docked in a

Cambridge Audio or Apple dock.

Press and hold the source button that corresponds to the

input that the Apple product is connected to whilst also

pressing one of the buttons below.

The functions are slightly different depending on the Apple

product.

Select

Play/pause

Stop or Menu

Press briey to skip or navigate left or right. Press

and hold to scan forwards or backwards.

Used to control volume and/or navigate menus.

Used to navigate menus.

In addition, the Azur remote can be paired with up to six specic Apple

devices using any of the six source buttons. This can be useful if you

have more than one Apple product.

For more information on pairing refer to your Apple device’s instruction

manual.

Pairing – To pair with an Apple device, press and hold the required

source button along with the  button for six seconds. Some devices

like Apple TV have visual indication once pairing is achieved.

Un-pairing – To un-pair an Apple device, press and hold any of the source

buttons along with the  button for six seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 851C Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 851C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info