Bedienungsanleitung Cambridge Audio Azur 851C (Seite 8 von 16) (Englisch)

497439

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Operating instructions

Once all the required input and output connections are made, the 851C

can be switched on using its rear panel Power switch and front panel

or handset Standby/On button. The amplier to which the 851C is

connected should also be switched on, the appropriate input selected,

and its volume control set at the appropriate level.

Either front panel or handset buttons can be used for the majority of the

851C control functions.

To use the 851C as a conventional CD player proceed as described in the

following paragraphs:

Loading and playing CDs

This unit has been designed to play compact discs,

recordable CDs (CD-R) and re-writable CDs (CD-RW)

bearing the identication logo shown here. No other

discs can be used. Any CD-R/CD-RW discs should

contain properly recorded TOC (Table of Contents) information so that

they can be played back. This unit can play only the discs recorded in the

CD-DA format designed for music reproduction. Do not attempt to play a

disc containing other data, such as a CD-ROM for PCs with MP3 or WMA

les, on this unit.

1. Press the front panel or handset Open/Close

button to open the

disc drawer. When the drawer is fully open, place a disc in the drawer

with its label side upwards.

2. To close the disc drawer, press the Open/Close

button. When the

drawer, with a correctly loaded disc, is fully closed, the disc table of

contents will be automatically read by the player. The 851C display

will show the number of tracks on the disc and its total playback time.

Pressing the front panel or handset Play () button will also close the

drawer, and start the disc playing.

Note: If the 851C Auto Play setup feature is selected, the disc will always

begin playing as soon as the drawer is closed. Refer to Section 5 – 851C

Setup for more information.

3. If the disc does not begin to play immediately, press the front panel

Play/Pause or handset Play () button to begin playback. To pause

playback temporarily press the front panel Play/Pause or handset

Pause () button. To stop playback press the front panel or handset

Stop () button. While the disc is playing the 851C display will show

the current track name or number and its elapsed time. If the disc is

paused the display will show the elapsed time at which pause was

selected. If the disc is stopped the display will revert to showing the

number of tracks on the disc and its total playback time.

Note: The 851C should not be left in pause mode for long periods.

4. The disc drawer can be opened at any time by pressing the front panel

or handset Open/Close

button. Remove the disc only after the

drawer has fully opened.

IMPORTANT!:

– Do not put anything except a compatible disc into the disc drawer.

Foreign objects may damage the mechanism.

– Do not force the drawer to open or close by hand.

– Keep the disc drawer closed when the player is not in use.

– If a disc is seriously scratched or dirty the player may not be able to

read or play it.

– Never load more than one disc at a time into the disc drawer.

Playing a specic CD track

With the 851C switched on and a disc loaded, specic tracks can be

selected for playback by pressing one of the front panel or handset

Skip ( ) buttons to step through the tracks on the disc forwards or

backwards. When the desired track is shown on the 851C display, press

the front panel or handset Play () button to begin playback. The disc

will then play from the selected track to the end.

Scanning within tracks

With the 851C switched on and a disc playing, a specic point in a

track can be found by pressing and holding one of the front panel or

handset Scan ( ) buttons to fast-forward or fast-reverse through the

track. When the desired point in the track is reached the button can be

released. The disc will then play from the selected point to the end.

Repeating discs and tracks

With the 851C switched on and a disc playing, either a specic track or

an entire disc can be set to repeat indenitely. To repeat a specic track

press the handset Repeat button once while the track is playing. The

851C display will show “Repeat Track”. To repeat an entire disc simply

press the handset Repeat button twice in quick succession. The 851C

display will show “Repeat All”. Track or disc repeat can be cancelled

by a further press of the Repeat button, by pressing the front panel or

handset Stop () button or by opening the disc drawer.

Playing tracks randomly

With the 851C switched on and a disc loaded, the tracks can be played

randomly. To select random play simply press the handset Random

button once and then the Play () button. Random play can be cancelled

by a further press of the Random button. The disc will then continue to

play the tracks in the “correct” order following the track that was playing

when random play was cancelled.

Using the Remain function

With the 851C switched on and a disc playing, press the handset Remain

button once to display the remaining track time or twice to display the

remaining disc time.

Programming disc play

The order in which CD tracks are played can be programmed with a

playlist. Tracks can also be suppressed from a playlist or programmed

to play more than once.

With the 851C switched on and a disc loaded, press the handset Prog

button. The 851C display will show the Program menu. Use the front

panel or handset Skip ( ) buttons to step through the disc to the

track you wish to be the rst track in the playlist. Press the handset Play

button to conrm the rst track. Repeat this procedure for all the tracks

required in the playlist and then press the front panel or handset Stop

() button to store the programmed playlist. When the playlist is stored,

use the front panel or handset Play () button to play the programmed

playlist.

The front panel or handset Pause (), Skip ( ) and Scan ( )

functions can be used as normal while a programmed playlist is playing.

Press the front panel or handset Stop () button once to stop playback

without deleting the playlist, or press it twice both to stop playback and

delete the playlist.

Cambridge Audio Azur 851C Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 851C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info