Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
CXR120/200
AV RECEIVER
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    CXR120/200
    AV RECEIVER



  • Page 2

    Contents
    Important safety instructions ................................................................... 3
    Limited warranty....................................................................................... 4
    Front panel controls................................................................................. 5
    Rear panel connections............................................................................ 5
    Main remote control................................................................................. 6
    Loudspeaker connections........................................................................ 7
    Analogue audio connections.................................................................... 7
    Digital audio connections......................................................................... 8
    5.1/7.1 direct in........................................................................................ 8
    HDMI connections.................................................................................... 9
    4K video resolution................................................................................... 9
    Aerial connections.................................................................................. 10
    Using the tuner....................................................................................... 10
    Presets................................................................................................... 10
    StreamMagic....................................................................................... 10
    Operating instructions............................................................................ 10
    Selecting the source............................................................................ 10
    Selecting the desired listening mode.................................................. 10
    Surround sound modes.......................................................................... 10
    DSP modes............................................................................................ 11
    Stereo/Stereo + Sub............................................................................ 11
    Direct................................................................................................... 11
    All channels......................................................................................... 11
    Setup menu............................................................................................ 12
    Speaker setup..................................................................................... 12
    Speaker configuration......................................................................... 12
    Auto Setup.......................................................................................... 12
    Manual Setup......................................................................................... 13
    Input Setup............................................................................................. 13
    Lip sync............................................................................................... 14
    Zone 2 (CXR200 only)............................................................................. 14
    Network Setup....................................................................................... 14
    Connecting to a wired network........................................................... 14
    Network Setup.................................................................................... 14
    Wireless Setup.................................................................................... 14
    General Settings..................................................................................... 15
    HDMI Output Setup................................................................................ 15
    DTS-HD speaker re-map..................................................................... 16
    Trigger outputs.................................................................................... 16
    SW Version.......................................................................................... 16
    Update Via USB.................................................................................. 16
    Save Current Settings......................................................................... 16
    Load Current Settings......................................................................... 16
    Factory Reset...................................................................................... 16
    Network software update....................................................................... 16
    Web administration interface............................................................... 16
    Wired connection................................................................................ 16
    Wireless connection............................................................................ 16

    Before connecting
    The process of setting up the CXR is first to make all the connections to your
    speakers and source equipment and then set the unit up via its On-Screen
    Display (OSD). There are various settings and adjustments that need to be
    made before the CXR can be used.
    However before you actually decide which connections to make or perform
    any adjustments it is strongly advised that you read through the 'Setup menu'
    section of this manual first, starting on page 12.

    For more detailed information, please visit our website
    www.cambridgeaudio.com for the product reference
    manual and FAQ.

    Make sure you register your purchase.
    Visit: www.cambridgeaudio.com/vip
    By registering, you'll be the first to know about:
    • Future product releases
    • Software upgrades
     ews, events and exclusive offers plus
    •N
    competitions!
    This guide is designed to make installing and using this product
    as easy as possible. Information in this document has been
    carefully checked for accuracy at the time of printing; however,
    Cambridge Audio’s policy is one of continuous improvement,
    therefore design and specifications are subject to change without
    prior notice.
    © Copyright Cambridge Audio Ltd 2016.
    For DTS patents, see http://patents.dts.com. Manufactured under
    license from DTS Licensing Limited. DTS, DTS-HD, the Symbol,
    & DTS and the Symbol together are registered trademarks, and
    DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All
    Rights Reserved.
    Manufactured under license from Dolby Laboratories. Dolby,
    Pro Logic, and the double-D symbol are trademarks of Dolby
    Laboratories.
    "HDMI","HDMI logo" and "High-Definition Multimedia Interface"
    are trademarks or registered trademarks of HDMI Licensing LLC.
    The Spotify software is subject to third party licenses found here:
    www.spotify.com/connect/third-party-licenses.

    2



  • Page 3

    CXR120/200
    Important safety instructions
    For your own safety please read the following important safety instructions
    carefully before attempting to connect this unit to the mains power supply.
    They will also enable you to get the best performance from and prolong the
    life of the unit:
    1. Read these instructions.
    2. Keep these instructions.
    3. Heed all warnings.
    4. Follow all instructions.
    5. Do not use this apparatus near water.
    6. Clean only with a dry cloth.
    7. D
     o not block any ventilation openings. Install in accordance with the
    manufacturer’s instructions.
    8. D
     o not install near any heat sources such as radiators, heat registers,
    stoves, or other apparatus (including amplifiers) that produce heat.
    9. D
     o not defeat the safety purpose of the polarized or grounding-type
    plug. A polarized plug has two blades with one wider than the other. A
    grounding-type plug has two blades and a third grounding prong. The
    wide blade or the third prong are provided for your safety. If the provided
    plug does not fit into your outlet, consult an electrician for replacement
    of the obsolete outlet.
     rotect the power cord from being walked on or pinched, particularly at
    10. P
    plugs, convenience receptacles and the point where they exit from the
    apparatus.
    11. Only use attachments/accessories specified by the manufacturer.
     nplug this apparatus during lightning storms or when unused for long
    12. U
    periods of time.
    13. R
     efer all servicing to qualified service personnel. Servicing is required
    when the apparatus has been damaged in any way, such as the powersupply cord or plug having been damaged, liquid has been spilled or
    objects have fallen into the apparatus, the apparatus has been exposed
    to rain or moisture, does not operate normally, or has been dropped.
    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
    NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS
    FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON
    THIS APPARATUS.
    Batteries (battery pack or batteries installed) shall not be exposed to
    excessive heat such as sunshine, fire or the like.
    TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC
    MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC
    RECEPTACLE. POUR DECONNECTER COMPLETEMENT L’APPAREIL DU
    RESEAU D’ALIMENTATION, DECONNECTER LE CORDON D’ALIMENTATION
    DE LA PRISE MURALE.
    THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN
    READILY ACCESSIBLE. LA PRISE DU RESEAU D’ALIMENTATION DOIT
    DEMEURER AISEMENT ACCESSIBLE”
    Only use the mains cord supplied with this unit.

    The lightning flash with the arrowhead symbol within an equilateral triangle
    is intended to alert the user to the presence of un-insulated ‘dangerous
    voltage’ within the product’s enclosure that may be of sufficient magnitude to
    constitute a risk of electric shock to persons.
    The exclamation point within an equilateral triangle is intended to alert the
    user to the presence of important operating and maintenance instructions in
    the service literature relevant to this appliance.
    The symbol on this product indicates that it is of CLASS II (double
    insulated) construction.

    WEEE symbol

    The crossed-out wheeled bin is the European Union symbol
    for indicating separate collection for electrical and electronic
    equipment. This product contains electrical and electronic
    equipment which should be reused, recycled or recovered and
    should not be disposed of with unsorted regular waste. Please
    return the unit or contact the authorised dealer from whom you purchased
    this product for more information.

    CE mark

    This product complies with European Low Voltage (2014/35/
    EU), Electromagnetic Compatibility (2014/30/EU) and
    Environmentally-friendly design of Energy-related Products (2009/125/EC)
    Directives when used and installed according to this instruction manual.
    For continued compliance only Cambridge Audio accessories should be
    used with this product and servicing must be referred to qualified service
    personnel.

    RCM (Regulatory Compliance Mark)

    This product meets the Safety, EMC and Radio Communications
    requirements of the ERAC and ACMA.

    CU-TR Mark

    This product meets Russia, Byelorussia and Kazakhstan electronic
    safety approvals.

    Caution: Hot Surface. Do Not Touch

    The top surface over the internal heat sink may become hot when
    operating this product continuously. Do not touch hot areas,
    especially around the "Hot surface mark" and the top panel.

    FCC regulations

    NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
    OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
    TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
    AUTHORITY TO OPERATE THE EQUIPMENT.
    This equipment has been tested and found to comply with the
    limits for a Class B digital device, pursuant to Part 15 of the FCC
    Rules. These limits are designed to provide reasonable protection
    against harmful interference in a residential installation. This
    equipment generates, uses and can radiate radio frequency energy and, if
    not installed and used in accordance with the instructions, may cause harmful
    interference to radio communications. However, there is no guarantee that
    interference will not occur in a particular installation.
    If this equipment does cause harmful interference to radio or television
    reception, which can be determined by turning the equipment off and on, the
    user is encouraged to try to correct the interference by one or more of the
    following measures:
    - Re-orient or relocate the receiving antenna.
    - Increase the separation between the equipment and receiver.
    -C
     onnect the equipment into an outlet on a circuit different from that to which
    the receiver is connected.
    - Consult the dealer or an experienced radio/TV technician for help.

    3



  • Page 4

    Limited warranty
    Ventilation

    Cambridge Audio warrants this product to be free from defects in materials
    and workmanship (subject to the terms set forth below). Cambridge Audio will
    repair or replace (at Cambridge Audio's option) this product or any defective
    parts in this product. Warranty periods may vary from country to country. If
    in doubt consult your dealer and ensure that you retain proof of purchase.

    Ensure that small objects do not fall through any ventilation grille. If this
    happens, switch off immediately, disconnect from the mains supply and
    contact your dealer for advice.

    To obtain warranty service, please contact the Cambridge Audio authorised
    dealer from which you purchased this product. If your dealer is not equipped
    to perform the repair of your Cambridge Audio product, it can be returned by
    your dealer to Cambridge Audio or an authorised Cambridge Audio service
    agent. You will need to ship this product in either its original packaging or
    packaging affording an equal degree of protection.

    IMPORTANT – The unit will become hot when in use. Do not stack multiple
    units on top of each other. Do not place in an enclosed area such as a
    bookcase or in a cabinet without sufficient ventilation.

    Please ensure there is ample ventilation (at least 20cm clearance on the top,
    side and rear). Do not put any objects on top of this unit. Do not situate it on a
    rug or other soft surface and do not obstruct any air inlets or outlet grilles. Do
    not cover the ventilation grilles with items such as newspapers, tablecloths,
    curtains, etc.

    Positioning

    Choose the installation location carefully. Avoid placing it in direct sunlight or
    close to a source of heat. No naked flame sources, such as lighted candles,
    should be placed on the unit. Also avoid locations subject to vibration and
    excessive dust, cold or moisture. The unit can be used in a moderate climate.
    This unit must be installed on a sturdy, level surface. Do not place in a sealed
    area such as a bookcase or in a cabinet. Any space open at the back (such
    as a dedicated equipment rack) is fine, however. Do not place the unit on an
    unstable surface or shelf. The unit may fall, causing serious injury to a child or
    adult as well as serious damage to the product. Do not place other equipment
    on top of the unit.
    Due to stray magnetic fields, turntables or CRT TVs should not be located
    nearby due to possible interference.
    Electronic audio components have a running in period of around a week (if
    used several hours per day). This will allow the new components to settle
    down and the sonic properties will improve over this time.

    Power sources

    The unit should be operated only from the type of power source indicated
    on the marking label. If you are not sure of the type of power-supply to your
    home, consult your product dealer or local power company.
    This unit can be left in Standby mode when not in use and will draw <0.5W in
    this state. To turn the unit off, switch off at the rear panel. If you do not intend
    to use this unit for a long period of time, unplug it from the mains socket.

    Overloading

    Do not overload wall outlets or extension cords as this can result in a risk of
    fire or electric shock. Overloaded AC outlets, extension cords, frayed power
    cords, damaged or cracked wire insulation and broken plugs are dangerous.
    They may result in a shock or fire hazard.
    Be sure to insert each power cord securely. To prevent hum and noise, do not
    bundle the interconnect leads with the power cord or speaker leads.

    Cleaning

    To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
    cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an
    aerosol at or near the unit.

    Battery disposal

    Batteries may contain substances harmful to the environment. Please dispose
    of any discharged batteries with due consideration and in accordance with
    local environmental/electronic recycling guidelines.

    Loudspeakers

    Before making any connections to loudspeakers, make sure all power is
    turned off and only use suitable cables.

    Servicing

    These units are not user serviceable. Never attempt to repair, disassemble or
    reconstruct the unit if there seems to be a problem. A serious electric shock
    could result if this precautionary measure is ignored. In the event of a problem
    or failure, please contact your dealer.

    4

    Proof of purchase in the form of a bill of sale or receipted invoice, which is
    evidence that this product is within the warranty period, must be presented
    to obtain warranty service.
    This Warranty is invalid if (a) the factory-applied serial number has been
    altered or removed from this product or (b) this product was not purchased
    from a Cambridge Audio authorised dealer. You may call Cambridge Audio
    or your local country Cambridge Audio distributor to confirm that you have
    an unaltered serial number and/or you purchased from a Cambridge Audio
    authorised dealer.
    This Warranty does not cover cosmetic damage or damage due to acts of
    God, accident, misuse, abuse, negligence, commercial use, or modification
    of, or to any part of, the product. This Warranty does not cover damage
    due to improper operation, maintenance or installation, or attempted repair
    by anyone other than Cambridge Audio or a Cambridge Audio dealer, or
    authorised service agent which is authorised to do Cambridge Audio warranty
    work. Any unauthorised repairs will void this Warranty. This Warranty does not
    cover products sold AS IS or WITH ALL FAULTS.
    REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY
    ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO
    SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
    DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN
    THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
    WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND
    IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO,
    THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL
    PURPOSE.
    Some countries and US states do not allow the exclusion or limitation of
    incidental or consequential damages or implied warranties so the above
    exclusions may not apply to you. This Warranty gives you specific legal rights,
    and you may have other statutory rights, which vary from state to state or
    country to country.
    For any service, in or out of warranty, please contact your dealer.



  • Page 5

    CXR120/200
    ENGLISH

    Front panel controls
    CX R200

    4

    7

    5

    11
    6
    8

    3

    9

    1

    HDMI 8/ MHL

    2

    1. Standby/On
    2. Phones

    10

    For suitable headphones – connection
    will mute the main zone speakers.

    5. Zone (CXR200 only)
    Press this button followed by
    Standby/On or Source +/- to change
    Zone 2. When illuminated, indicates
    that Zone 2 is On.

    8. Menu
    9. Back

    3. Tuning +/-

    6. Display

    10. USB / MP3 / HDMI/
    MHL Inputs

    Used to tune FM/AM frequencies and
    presets for the built-in Tuner.

    Status window.

    7. Source +/-

    4. Direct

    Also used for character entry. +/button to move between character
    entry.

    Disables any audio processing on the
    current source.

    HDMI 8/MHL – For connection to a
    HDMI source or MHL compatible
    device.

    In the Setup menu, press to return to
    the previous item.

    11. Volume

    Volume and 'select' button. Also used
    for character entry. Rotate to browse
    through the characters.

    USB - For playback of audio on USB
    Media from USB Flash-disks or USB
    hard-drives.
    MP3 (
    ) – For connection to a
    portable audio device.

    Rear panel connections
    7

    2

    1

    5

    13
    12

    9

    6

    17

    18

    16

    19

    21

    14

    8
    3

    15

    20
    22

    4
    10

    1. FM / AM aerials
    2. Analogue inputs
    (CXR120 3 inputs only)

    3. 7.1 Direct in
    4. Pre out / Sub out
    5. Rec out
    6. Zone 2 out (CXR200 only)
    7. HDMI 2.0 compatible
    inputs

    11

    8. Vent grille

    13. HDMI 2.0 outputs

    DO NOT OBSTRUCT!

    CXR120 – Outputs mirrored.

    9. Digital in

    CXR200 – Output 2 can display a
    different source in Zone 2.

    (CXR120 2 optical only)

    10. Zone 2 speaker
    outputs (CXR200 only)
    11. Bi-amp speaker
    terminals (CXR200 only)
    12. Ethernet

    14. USB

    For connection to the supplied wifi
    antenna or optional BT100 Bluetooth
    audio receiver.

    15. Speaker terminals
    16. IR receiver In

    17.
    18.
    19.
    20.
    21.

    Emitter in
    IR out
    Trigger out
    AC power socket
    RS232C

    Custom install control - a full protocol
    is available for the CXR on our
    website.

    22. Power on/off
    5



  • Page 6

    Main remote control
    1. Backlight button
    Illuminates the buttons.

    2. Standby/On
    3. Source buttons

    1

    2

    Pressing the FM/AM button a second time toggles
    between FM and AM.
    The TV button selects TV-ARC (Audio Return Channel).

    Sources

    The SM button selects the StreamMagic module.

    4. Volume
    5. Back

    1

    2

    3

    5

    6

    7

    8

    SM

    MP3

    FM/AM

    TV

    3

    4
    CXR200

    Press to return to the previous menu.

    6. Home

    Turns On and Off the on-screen setup menu.

    7. Skip

    Skips between tracks on the StreamMagic module.

    8. Enter
    9. Navigation

    Press to navigate around the menus. Also used for
    character entry. ◄/► to move between character
    entry, ▲/▼ to browse through the characters.

    5

    6

    7

    7

    8

    9

    10

    11

    10. Mute
    11. Info

    Displays current Source/Volume on screen.

    12. Stereo modes
    13. Surround modes
    14. Stop/Play/Pause (StreamMagic)
    Press to stop, play or pause streaming playback.

    15. Direct

    StreamMagic

    12

    15

    19

    Direct

    Bass
    Treble

    14
    16

    Lip
    Sync

    18
    Store
    Presets

    Stereo
    Mono

    20

    Presets

    1

    2

    3

    4

    5

    6

    7

    8

    21

    1
    2

    23

    20. Stereo/Mono
    For FM/AM radio.

    21. Presets

    Recalls stored presets.

    22. Trigger

    Toggle On and Off the Trigger outputs.
    Press and hold then press Source button, Volume or Mute.

    6

    Surround
    Modes

    17

    Adjusts the brightness of the front panel display.

    23. Zone 2

    Stereo
    Modes

    13

    16. Dim

    For FM/AM radio.

    4

    Vol

    Disables any audio processing on the current source.

    17. Bass/Treble
    18. Lip sync
    19. Store presets

    4

    Vol

    Zone 2

    3
    Blu-ray

    Trigger

    22



  • Page 7

    CXR120/200

    Switch the power off before making connections. Ensure that correct polarity
    is maintained.

    Use 4mm plugs for direct insertion into the speaker terminals.
    Surround back/height, Bi-amp and Zone 2 speaker connections can all be
    connected to speakers, but only one will be active. This can be set in the
    Speaker Configuration menu.

    10mm

    Powered subwoofer

    Centre
    speaker

    Phono/RCA
    cable

    7.1
    Right

    5.1
    Left

    Front
    Right

    Front
    Left

    Centre

    Surround
    Right

    Surround
    Left

    Sub Out

    Surround Back/Height

    SW1

    Speaker Impedance: Nominal 8 Ohms

    Surround back
    speakers

    Front
    speakers

    Surround
    speakers

    Analogue audio connections
    Switch the power off before making connections.
    Out

    CD player

    Pre Out

    Out

    Phono cable
    (2RCA-2RCA)

    BD/DVD player

    Sub Out

    Audio player/recorder
    (Tape/MD/CD-R)

    In
    7

    ENGLISH

    Loudspeaker connections



  • Page 8

    Digital audio connections
    BD/DVD player

    Out

    OR

    1

    Pre Out

    OR
    2

    2
    2

    Audio player/recorder
    (Tape/MD/CD-R)

    OR

    Out

    Out

    8

    Sub Out

    Centre

    Subwoofer

    Surround Right

    Front Right
    Front Left
    Surround Left

    DVD-A SACD player

    Pre Out

    1

    OR

    5.1/7.1 direct in

    Phono cables
    (2RCA-2RCA)

    1

    Sub Out

    1

    CD player

    Out

    iD100 Digital iPod Dock

    2



  • Page 9

    HDMI connections

    4K video resolution

    The source resolution cannot be greater than that of the TV you are using consult your HDMI source and TV manual and adjust accordingly.

    The CXR supports 4K video resolution. Use a high speed HDMI cable when
    connecting 4K devices.

    Ensure that the HDMI output of your Blu-ray player has been set to 'Raw' to
    pass the latest high resolution audio formats to the CXR.

    Note: 4K is not supported on the HDMI/MHL inputs.

    4K
    (3840 x 2160)

    1080p
    (1920 × 1080)

    Blu-ray player

    Sub Out

    Pre Out

    Set-top box

    Pre Out

    Sub Out

    TV

    TV

    ARC

    9

    ENGLISH

    CXR120/200



  • Page 10

    Aerial connections

    Operating instructions
    Examples

    FM aerial
    OR

    To activate the CXR, switch the Power switch on the rear panel to On then
    press the Standby/On button on the front panel.

    Selecting the source

    FM external
    aerial
    (recommended)

    Select the source by using the Source +/- buttons on the front panel. After
    4 to 5 seconds the CXR will select the new source, or it can be selected
    by pressing the volume knob. The source selection buttons on the remote
    control can also be used to directly select the source.

    Selecting the desired listening mode

    Select an appropriate mode for the source material/type you are listening to
    by pressing the Stereo or Surround Modes button on the remote.

    Surround sound modes

    AM external aerial
    (recommended)
    OR

    Pre Out

    Sub Out

    AM loop
    aerial
    Ground
    (optional)

    Using the tuner
    Change the tuning mode to Preset, Manual or Scan via 'Input Setup > Mode'
    when the FM or AM tuner is selected.
    Press the Tuning +/- button on the front panel (or the ▲ and ▼ buttons on
    the remote) to select station.
    Frequency increments can be set for AM/FM depending on geographic
    location. 'General Settings > AM/FM Tuner Steps'.

    Radio Data Systems (RDS)

    Press the Info button on the remote to choose:
    PS (Station Name) – Current station name will be shown.
    PTY (Program Type) – Current program type will be shown.
    RT (Radiotext) – Radiotext messages will be shown, if available.
    Note: If no valid RDS data has been received the Info button will display the
    normal unit information.

    Presets
    1. Press and hold the Store Presets button on the remote for 5 seconds.
    2. U
     se the Tuning +/- on the front panel or the navigation buttons to select a
    preset station number (1-30).
    3. Press the Store Presets button on the remote to store the station.

    StreamMagic

    On the Connect App you can search for an Internet Radio station and then
    add it to a Preset memory location in the app.

    The CXR supports several music and home-cinema listening modes. The
    output the CXR can provide depends both on the source signal present, the
    speaker setup selected and the decode mode selected.
    Dolby's lossless audio technology developed primarily for high capacity
    Blu-ray discs/players. Dolby True HD delivers theoretically bit-for-bit sound
    identical to the studio master by the use of 100% lossless encoding. Previous
    formats such as Dolby Digital 5.1 or EX have used lossy encoding where
    some data (that is theoretically less audible) is always lost in the encoding
    process to reduce the storage capacity needed on the disc. This is a new
    format that supports up to eight (usually used as 7.1) full-range channels of
    24-bit/96 kHz audio or two channels of 24/192 kHz via Blu-ray discs and is
    not backwards compatible with earlier schemes. The format can either be
    transmitted as a 'bitstream' to the CXR for internal decoding (recommended)
    or can be decoded by some Blu-ray players internally and sent to the CXR
    as multi-channel PCM. In both cases an HDMI connection is required to the
    CXR and a suitable Blu-ray player as Dolby True HD is only ever transmitted
    over HDMI.
    An encoding scheme based on the original Dolby Digital CODEC, but with
    enhancements to improve coding efficiency and improved audio quality.
    Dolby Digital Plus supports 7.1 fully discrete channels compared to Dolby
    Digitals 5.1 (or 6.1 in its EX variant where the 6th channel is matrix encoded).
    These Dolby Digital Plus bitstreams are not backward compatible with legacy
    Dolby Digital decoders but require an AV Receiver developed to decode them
    (such as the CXR) and an HDMI connection as Dolby Digital Plus is currently
    only transmitted over HDMI. It is however a requirement that any Dolby Digital
    Plus enabled Blu-ray player must also be able transform the Dolby Digital
    Plus into a backwards compatible Dolby Digital 5.1 output for playback on
    legacy Dolby Digital systems. The CXR is however fully compatible with Dolby
    Digital Plus.
    A new lossless audio codec from DTS, rather than being incompatible with
    earlier versions, DTS-HD Master Audio is transmitted as an extension to a
    normal DTS bitstream. A second embedded stream is sent which contains
    the "difference" between the original studio master and the lossy compressed
    DTS, plus the two extra channels. DTS-HD Master Audio enabled devices
    (such as the CXR) are able to use this difference information to recreate a bit
    for bit lossless version of the original 7.1 data. Devices which do not support
    the Master Audio extension simply decode the original 5.1 DTS stream and
    ignore the Master Audio extension providing backwards compatibility.

    DTS-HD High Resolution Audio

    Known also as DTS-HR an extension to the original DTS audio format. DTSHD High Resolution Audio supports 7.1 fully discrete channels compared to
    DTS's 5.1 (or 6.1 in its DTS ES Matrix or DTS ES Discrete variants). As with
    DTS-HD Master Audio a second embedded stream is sent which contains the
    "difference" between the original studio master and the lossy compressed
    DTS, plus the two extra channels, however in this case the extra stream is
    also formed by lossy compression. Effectively this is a 7.1 version of DTS
    which can be decoded by devices (such as the CXR) which are able to
    decode DTS-HD High Resolution Audio. Devices which do not support the
    High Resolution extension simply decode the original 5.1 DTS stream and
    ignore the High Resolution extension providing backwards compatibility.
    Known also as Dolby Digital (3/2) or Dolby Digital 5.1, provides (up to) 5.1
    output from suitable encoded Dolby Digital material, with 5 main channels
    (Front Left, Front Right, Centre, Surround Left, Surround Right) and a
    Low Frequency Effects Channel for the subwoofer, all discretely encoded.
    Decoding Dolby Digital requires a Dolby Digital encoded DVD disc and a
    digital connection from the source equipment (Such as a DVD player) to the
    CXR.

    10



  • Page 11

    Note: Dolby Digital and DTS formats can sometimes carry less channels
    than their maximum such as Dolby Digital (2/0) which means a Dolby Digital
    encoded signal which is actually only carrying a two channel stereo signal
    (other channels inactive).
    Known also as DTS (3/2) or DTS 5.1, DTS provides (up to) 5.1 output from
    suitable encoded DTS material, with 5 main channels (Front Left, Front Right,
    Centre, Surround Left, Surround Right) and a Low Frequency Effects Channel
    for the subwoofer, all discretely encoded. Decoding DTS requires a suitably
    encoded DTS disc and a digital connection from the source equipment to
    the CXR.
    Known also as Dolby Digital (3/3) or Dolby Digital 6.1, an enhanced form of
    Dolby Digital. On top of the discretely encoded 5.1 channels Dolby Digital EX
    provides an extra 6th channel (Surround Back, giving 6.1) matrix encoded into
    the rear surrounds for greater image depth and more solid sound localisation
    behind the listener. Dolby Digital EX requires a Dolby Digital EX encoded disc.
    Dolby Digital EX is backwards compatible with Dolby Digital 5.1 decoding. If
    Dolby Digital EX is decoded as normal Dolby Digital the Surround Back signal
    will be present in both Left and Right Rear Surrounds (forming a phantom rear
    centre). It can also be decoded as 7.1 by sending the Surround Back decode
    to both the Surround Back Left and Right speakers (forming two mono Back
    Surrounds).
    Known also as DTS (3/3) Matrix, an enhanced form of DTS. On top of the
    discretely encoded 5.1 channels DTS ES also provides an extra 6th channel
    (Surround Back giving 6.1), matrix encoded into the rear surrounds for greater
    image depth and more solid sound localisation behind the listener. DTS ES
    requires a DTS ES encoded disc. DTS ES material is backwards compatible
    with DTS 5.1 decoding. If DTS ES is decoded as normal DTS the Surround
    Back signal will be present in both Left and Right Rear Surrounds (forming a
    phantom rear centre). It can also be decoded as 7.1 by sending the Surround
    Back decode to the both the Surround Back Left and Right speakers (forming
    two mono Back Surrounds).
    Another enhanced form of DTS, also known as DTS (3/3) Discrete or DTS
    ES Discrete 6.1. DTS ES Discrete also provides an extra channel (Surround
    Back) for greater image depth and more solid sound localisation behind the
    listener, however in this case extra data is included in the bitstream so that all
    channels are discretely encoded. The Surround Back has greater separation
    from the other channels than is possible with matrix encoded technologies.
    DTS-ES Discrete requires a DTS-ES Discrete encoded disc.
    DTS ES Discrete is backwards compatible with both DTS 5.1 and DTS
    ES Matrix 6.1 decoding. If DTS ES Discrete is decoded as normal DTS the
    Surround Back signal will be present in both Left and Right Rear Surrounds
    (forming a phantom rear centre). If DTS ES Discrete is decoded with DTS ES
    Matrix the Surround Back signal will be decoded separately (i.e. as 6.1) but by
    a matrix process, which will give the same channel separation as if the source
    disc were actually DTS ES Matrix (but not as good as DTS EX Discrete).

    A new Dolby matrix technology that delivers additional height channels
    positioned above the front left and right speakers. Dolby Pro Logic IIz
    identifies spatial cues that occur naturally in most content plus ambient sound
    and amorphous effects such as rain or wind and directs them to additional
    front height speakers.
    Movie and game producers can also mix specific additional height channels
    into a 2ch, 5.1 or 7.1 soundtrack, which Dolby Pro Logic IIz will then decode
    as a post process.
    If it is desired to use Dolby Pro Logic IIz, you should set the CXR to 5.1
    + Height mode, connect two speakers to the SBL and SBR outputs and
    physically position them above your left and right front speakers, then select
    Dolby Pro Logic IIz post processing. See later section.
    A DTS technology which is able to recreate 6 channel (Left Front, Right Front,
    Centre, Left Surround, Right Surround, Surround Back ) surround sound from
    suitable analogue matrix encoded stereo source material. DTS Neo:6 material
    can be played back by normal Stereo equipment (as Stereo) or decoded into
    7.1 by sending the Surround Back decode to the both the Surround Back Left
    and Right speakers (forming two mono Back Surrounds).
    Note: Neo:6 does not include a Low Frequency Effects channel for
    the Subwoofer, but the CXR can create a Subwoofer output via Bass
    management. Refer to the 'Speaker Setup' section of this manual.
    A DTS technology that provides 5.1 channels of 96kHz / 24bit audio (along
    with video if required) on DVD-Video and DVD-Audio (video zone) discs (when
    suitably encoded in DTS 96/24). DVD players which allow 'DTS digital out'
    pass the DTS 96/24 bitstream over S/P DIF or HDMI for decoding in the CXR.

    DSP modes
    Stereo/Stereo + Sub

    These modes allow you to choose between conventional stereo left and right
    speakers or stereo speakers with subwoofer.

    Direct

    Analogue and digital inputs will bypass any DSP, Bass/Treble controls and
    multichannel post processing.

    All channels

    A stereo input will be mapped to all speakers, with left speakers receiving left
    stereo and right speakers receiving right stereo. The center and sub will be
    sent a mono signal.

    It can also be decoded as 7.1 by sending the Surround Back decode to
    both the Surround Back Left and Right speakers (forming two mono Back
    Surrounds).
    The replacement for the original Dolby Pro Logic, Dolby Pro Logic II is a
    technology where 5 channels (Front Left, Front Right, Centre, Surround
    Left, Surround Right) are encoded into a Stereo mix by an analogue matrix
    process. Dolby Pro Logic II material can be played back by normal Stereo
    equipment (as Stereo) or decoded into 5 channel surround-sound.
    Dolby Pro Logic II is compatible with the earlier 4 channel (Left, Centre,
    Right and mono Surround) Dolby Pro Logic system (which was the decoding
    counterpart to Dolby Surround encoding) as used widely on Video tapes, TV
    broadcasts and earlier films.
    Note: Dolby Pro Logic does not include a Low Frequency Effects channel for
    the Subwoofer, but the CXR can create a Subwoofer output (for 5.1) via Bass
    management. Refer to the 'Speaker Setup' section of this manual.
    A newer version of Dolby Pro Logic II which is able to recreate 7 discrete
    surround sound channels from suitable encoded stereo source material.
    Dolby Pro Logic IIx also has modes for post processing either Stereo material
    or 5.1 material into 7 channels whether or not it has been Dolby Pro Logic
    IIx encoded. When 5.1 decoding is required, Dolby Pro Logic II decoding will
    always be used by the CXR in place of Dolby Pro Logic IIx as IIx only works
    for 7 channel output.
    Note: Dolby Pro Logic IIx does not include a Low Frequency Effects channel
    for the Subwoofer, but the CXR can create a Subwoofer output (for 7.1) via
    Bass management. Refer to the 'Speaker Setup' section of this manual.

    11

    ENGLISH

    CXR120/200



  • Page 12

    Setup menu
    Speaker setup

    Refer to the following diagrams for typical examples of loudspeaker setups.

    Speaker configuration
    CXR Setup Menu

    5.1



    Speaker Setup

    Speaker Configuration

    Input Setup

    Auto Setup

    Zone 2 Settings

    Unit

    Metres

    Network Setup

    SW Selection

    Subwoofer1+Subwoofer2

    General Settings

    Back Amp Configuration

    Bi-Amp



    Enter

    HDMI Output Setup
    Advanced Setup

    First select the number of subwoofers you have connected 'SW Selection'
    and if you have a 7.1 system choose 'Surround Back' for the Back
    Amp Configuration. If you have chosen to use height speakers, choose
    '5.1+Height'.
    CXR Setup Menu

    5.1 + Height



    Speaker Setup

    Speaker Configuration

    Input Setup

    Auto Setup

    Zone 2 Settings

    Unit

    Metres

    Network Setup

    SW Selection

    Subwoofer1+Subwoofer2

    General Settings

    Back Amp Configuration

    Surround Back



    HDMI Output Setup
    Advanced Setup

    CXR Setup Menu


    Speaker Setup

    Speaker Configuration

    Input Setup

    Auto Setup

    Zone 2 Settings

    Unit

    Metres

    Network Setup

    SW Selection

    Subwoofer1+Subwoofer2

    General Settings

    Back Amp Configuration

    Surround Back



    HDMI Output Setup
    Advanced Setup

    7.1

    CXR200

    Auto setup

    Auto setup will check if your speakers are available, connected correctly, their
    size and set crossover and distance.

    HDMI 8/ MHL

    Select 'Run Auto Setup'.
    CXR Speaker Configuration
    C

    FL

    FR

    SW1
    SL

    Run Auto Setup

    SR

    Accept Setup
    SBL

    SBR

    Test Tone : Off

    Speaker Configuration: 7.1Ch
    Menu

    OK

    Exit

    Select your speaker setup.
    CXR Speaker Auto Setup
    C

    FL

    Select Speaker Channel

    FR

    SW1
    SL

    7.1

    SR

    5.1
    SBL

    SBR

    3.1
    2.1

    Test Tone : Off
    OK

    12

    Speaker Configuration: 7.1Ch

    Please check mic is connected in MP3 aux input.

    Menu

    Exit



  • Page 13

    Once finished press the Enter button on the remote to accept the setup.

    Highlight 'Test Tone' and press Enter. Use the navigation button on the
    remote to move from speaker to speaker and adjust the level until all are at
    the same volume using either the Front Left or Right as a reference.

    CXR Speaker Configuration
    C

    FL

    Front Left

    FR

    SW1
    SL

    SR

    SBL

    SBR

    Size

    Small

    Distance

    2.4m

    Level

    -2.OdB

    Crossover

    6O Hz

    CXR Speaker Configuration
    C

    FL

    Front Left

    FR

    SW1

    Next Speaker

    Accept Setup

    Test Tone : Off

    Level

    SL

    SR

    Back

    Speaker Configuration: 7.1Ch

    SBL

    Menu

    OK

    SBR

    Exit

    Size

    Large

    Distance

    3.6 m

    Level

    1.5 dB

    Crossover

    Off

    Next Speaker
    Back

    Test Tone : Off

    If an error occurred during the process, the CXR will indicate which speaker(s)
    you will need to check before restarting the process.

    C

    Speaker Error Status

    FR

    SW1
    SL

    Menu

    CXR Speaker Configuration

    Error Speaker List:

    SR

    C

    FL

    SUB
    SBL

    SL

    SR

    SBL

    Speaker Configuration: 7.1Ch

    Front Left

    FR

    SW1

    SBR

    Test Tone : Off

    Exit

    Crossover (for small speakers)

    CXR Speaker Auto Setup
    FL

    Speaker Configuration: 7.1Ch

    OK

    SBR

    Back

    Size

    Small

    Distance

    3.6 m

    Level

    O.O dB

    Crossover

    8O Hz

    Next Speaker
    Menu

    OK

    Back

    Exit

    Test Tone : Off

    Speaker Configuration: 7.1Ch

    OK

    Menu

    Exit

    Manual setup

    Frequencies below the crossover setting chosen will be directed to the
    subwoofer. The default is 80Hz and is a good starting point. For smaller
    speakers this may need to be adjusted higher, for larger speakers it can be
    set lower.

    Size

    Unit

    Select the speaker to be setup and choose from small, large or none.
    Large = Floorstanders or large stand-mounted speakers.
    Small = Small or satellite speakers (sub must be used).

    C

    SL

    Input source selection.

    Front Left

    FR

    SW1
    SR

    SBL

    SBR

    Size

    Large

    Distance

    3.6 m

    Level

    O.O dB

    Crossover

    Off

    Back

    Speaker Configuration: 7.1Ch
    Menu

    OK

    Input name

    Use the ▲▼◄► navigation buttons on the remote or -/+ input buttons on the
    front panel to select characters and customise the name.

    Next Speaker

    Test Tone : Off

    Input setup
    Source input

    CXR Speaker Configuration
    FL

    Set to Feet or Metres.

    Exit

    Video input

    You can assign a HDMI video input for StreamMagic /Connect, MP3, FM and
    AM sources only.

    Distance

    Measure the distance from your listening position to the speaker concerned
    and enter the distance. CXR will compensate for the differing distances to
    each speaker in your system.

    C
    SW1

    SL

    SBL

    Select either analogue, digital, HDMI, 7.1ch direct in or None.

    Front Left

    FR

    SR

    SBR

    Size

    Large

    Distance

    3.6 m

    Level

    O.O dB

    Crossover

    Off

    Next Speaker

    OK

    The Audio Input for SM/Connect, MP3, FM and AM cannot be changed.

    Analog audio process
    Choose No to bypass DSP.

    Back

    Test Tone : Off

    In Processed mode CXR will upscale 1080p video to 4K. In Passthrough
    mode the output video format will be the same as the input.

    Audio input

    CXR Speaker Configuration
    FL

    Video scaling

    Speaker Configuration: 7.1Ch
    Menu

    Exit

    Bass

    Adjusts bass.

    Treble

    Adjusts Treble.

    Dolby volume

    Dolby volume maintains a consistent volume across all content, programs
    and input sources.

    Dolby volume leveler

    Can be set from 1-9 or off: experiment to find the preferred setting

    Dolby calibration offset

    Used to trim differences in input level between sources.
    13

    ENGLISH

    CXR120/200



  • Page 14

    Input setup cont.
    Stereo processing

    Choose preferred stereo processing mode for the current source.

    Multichannel processing

    Controlling zone 2

    You can use the main remote handset, the buttons on the front of the unit
    itself or the Cambridge 'Connect' App to control Volume, source and mute.

    Choose preferred multichannel processing mode for the current source.

    From the remote press and hold the Zone 2 button followed by the feature
    you require.

    Lip sync

    Zone 2 power

    Adjust the audio delay if necessary to synchronise to video for the current
    source.

    Zone 2 (CXR200 only)

    Enables the Zone 2 function.

    Zone 2 source

    Select the video/audio source that will be sent to Zone 2.

    Zone 2 power on volume

    CXR Setup Menu
    Speaker Setup

    Zone 2 Power

    On

    Input Setup

    Zone 2 Source

    Follow Main Zone

    Zone 2 Settings

    Zone 2 Power On Volume

    - 30 dB

    Set the desired maximum volume level when powering on Zone 2.

    Network setup

    Network Setup
    General Settings
    HDMI Output Setup

    CXR Setup Menu

    Advanced Setup



    Speaker Setup

    Connection Information

    Input Setup

    Network Setup



    Zone 2 Settings

    Wireless Setup



    You can select sources independent from Main in Zone 2 or set to 'Follow
    Main Zone'.

    Network Setup

    Retry Connection

    HDMI 2 will output the audio as formatted by the chosen source, either stereo
    or multichannel unless set to 'Follow Main Zone' in which case a stereo
    downmix signal will be output.

    Advanced Setup

    Not Connected

    General Settings
    HDMI Output Setup

    To use CXR for Internet Radio/Audio Streaming you need:

    Zone 2 line level and speaker outputs

    To get audio in Zone 2 from a HDMI source you must select 'Follow Main' or
    select the same source as in the Main zone. If a different source is selected
    for Zone 2, then the zone 2 source must have a stereo audio input selected.

    Zone 2 speaker outputs

    In the menu 'Speaker Setup > Back Amp Configuration' select 'Zone 2'.
    Zone 2

    • A broadband internet connection
    • A wifi or wired network connection.
    Use a wired connection for seamless playback of high resolution 24/176 and
    24/192 files.

    Connecting to a wired network
    Internet

    Router/Modem

    Ethernet cable

    Connect a network cable (Category 5/5E or better, straight through Ethernet
    cable) between the CXR and your router.

    Using Zone 2 with an external amplifier

    The Zone 2 line level outputs can be connected to an amplifier for use in
    zone 2.

    Network setup

    For advanced users wanting to use a static IP. Only select static IP if you
    know exactly what you are doing!

    Wireless setup
    Zone 2

    Internet

    Router/Modem

    Connect the supplied wireless antenna to the correct USB input on the rear
    of CXR – it will need to be in range of your wireless router.

    14



  • Page 15

    Select 'Scan for Networks', select your wifi network and then enter your
    password.
    CXR Setup Menu
    Speaker Setup

    TV ARC (HDMI out 1)

    ARC allows a TV to send audio back down its incoming HDMI so that you can
    play back the audio from a TV source whilst you watch its picture.

    CEC control

    Network

    Input Setup

    Turn on to enable CEC control features.

    Zone 2 Settings
    Network Setup

    CEC power off control

    General Settings
    HDMI Output Setup

    Allows the CXR to be switched off into standby by the TV.

    Advanced Setup

    CEC power on control

    Allows the CXR to be switched on from standby by the TV.

    CXR Setup Menu

    On screen info display

    Speaker Setup
    Input Setup

    Enter Password

    When enabled, the input is changed or the info button on the remote control
    is pressed the Source name, Audio signal type and volume setting will be
    displayed on your screen.

    Zone 2 Settings
    Network Setup

    A

    General Settings
    HDMI Output Setup

    Advanced setup

    Advanced Setup

    Retry connection

    CXR Setup Menu

    Retry if the connection failed.

    General settings
    CXR Setup Menu
    Speaker Setup

    OSD Language

    English

    Input Setup

    Auto Power Off

    30 Minutes

    Zone 2 Settings

    Eco Mode

    Enable

    Network Setup

    Front Panel Dim

    Bright

    General Settings

    Network Standby

    Disable

    HDMI Output Setup

    AM Tuner Steps

    9 KHz (EU)

    Advanced Setup

    FM Tuner Steps

    50 KHz (EU)

    Speaker Setup

    Mute Level

    Mute

    Input Setup

    Mute Analogue REC Out

    None

    Zone 2 Settings

    Front IR

    Enable

    Network Setup

    Main Power on volume

    - 30 dB

    General Settings

    Advanced Dolby/DTS



    HDMI Output Setup

    Trigger 1 Out



    Advanced Setup

    Trigger 2 Out



    Mute level

    Select complete Mute, -10dB below current level or -30dB below current
    level.

    Mute analogue REC out

    OSD language

    Use this to prevent the analogue input your recording device is connected to
    being looped back to its input.

    Choose language for on screen display.

    Front IR

    Auto power off

    If nothing is playing CXR will turn off after 30mins. You can change this to 1
    Hour, 4 Hours, 8 Hours and Off.

    ECO mode

    If disabled, re-enable using the volume control to navigate and select.

    Main power on volume

    Sets maximum volume level when powering the CXR on.

    0.5W standby mode where Standby HDMI Bypass and Network Standby
    cannot be used.

    Advanced Dolby/DTS

    Front panel dim

    Panorama mode – A Dolby Pro Logic II/IIx mode that extends the front Stereo
    sound to the surround speakers.

    Network standby

    Centre Width – Adjusts from 100% Center speaker (Setting 0) to center
    speaker signal being sent completely to left and right main speakers
    (Phantom Centre, Setting 7).

    Change the brightness of the CXR display.
    Enable: The network connection is always on and CXR can be powered on
    from the Connect App.

    AM tuner steps

    Dimension – Adjusts the soundfield to shift gradually from the front of the
    room to the back.

    Dolby DRC (Dynamic Range Control)

    Set AM tuner steps for EU or USA.

    Limits the difference in level between loud and quiet passages.

    FM tuner steps

    Dolby D EX modes

    Set FM tuner steps for EU or USA.

    Decoding of Dolby EX encoded tracks for surround speakers.

    HDMI output setup

    Height gain

    Sets the gain of height speakers.

    CXR Setup Menu
    Speaker Setup

    Standby HDMi Bypass

    HDMI

    Input Setup

    TV ARC (HDMI OUT 1)

    Enable

    Zone 2 Settings

    CEC Control

    Off

    Network Setup

    CEC Power Off Control

    Disable

    General Settings

    CEC Power On Control

    Disable

    HDMI Output Setup

    On Screen Info Display

    On

    Advanced Setup

    Standby HDMI bypass

    Allows one HDMI source to be sent to your TV when the CXR is in standby
    mode, for example if you want to use your TV's speakers.
    15

    ENGLISH

    CXR120/200



  • Page 16

    HDMI output setup cont.

    Network software update

    DTS-HD speaker re-map

    The CXR can be updated via the StreamMagic module connected to the
    internet. Updates of the StreamMagic module itself can only be started from
    the Cambridge Connect app or the Web administration interface.

    When playing back a DTS-HD track the CXR can electronically reposition
    your speakers to match the setup used in the original recording studio. This
    is done automatically in most cases, but for 7.1 setups you will need to
    choose either option 1 or 5 – whichever most closely resembles your actual
    speaker layout.
    Configuration 1 – 7.1 channel: L, C, R, LFE, Ls, Rs, Lsr, Rsr
    Left (30°)

    Center

    Right (30°)

    LFE

    Web administration interface
    This interface allows the user to:

    -C
     ustomise the name displayed in the Players list in the Cambridge Connect
    app and in the Spotify Connect device list.
    - Setup the wireless network connection.
    - Upgrade the CXR's firmware.

    Left Surround (110°)

    Right Surround
    (110°)

    Wired connection

    Connect the CXR to a wired network and find the IP address in the 'CXR
    Setup Menu'.
    CXR Setup Menu

    Left Surround Rear
    (150°)

    Right Surround Rear
    (150°)

    Configuration 5 – 7.1 channel: L, C, R, LFE, Lss, Rss, Lsr, Rsr
    Left (30°)

    Note: A full update can take over 45 minutes to complete.

    Center

    Right (30°)

    Speaker Setup

    Connection Information

    Input Setup

    Network Selection

    Ethernet

    Zone 2 Settings

    IP Adress

    192.168.0.127

    Network Setup

    Subnet Mask

    0.0.0.0

    General Settings

    Gateway

    0.0.0.0

    HDMI Output Setup

    DNS1

    0.0.0.0

    Advanced Setup

    Next Page

    LFE
    Left Surround Side
    (90°)

    Left Surround Rear
    (150°)

    Trigger outputs

    Right Surround
    Side (90°)

    Use a web browser on the same network to connect to the CXR IP address,
    eg http://192.168.0.127/

    Right Surround Rear
    (150°)

    The outputs are 0V for Off and 12V for On at up to 100mA. The connections
    are 3.5mm mono mini-jacks, with the tip as the output, ring as ground.
    The options are:
    Manual Select: Trigger output is toggled On/Off by the matching Trigger
    button on the remote control.
    Follow Standby: The trigger output will follow the On/Off status of the unit.
    Sources: – The trigger output is linked to a specific source.

    SW version

    All 4 software version numbers need to be stated when contacting Cambridge
    Audio customer support.

    Update via USB

    The CXR software can be updated from the front panel USB socket, which
    would normally only be required by a service department or where a network
    is not available. Normally user updates will be via a network connection.

    Save current settings

    Saves settings to internal memory. If the current settings have not been
    saved, it is advisable to save the current settings before a software update
    is performed.

    Load saved settings
    Loads the stored settings.

    Factory reset

    After a factory reset any saved settings can be restored if desired.

    16

    Wireless connection

    Plug in the supplied wireless antenna to the USB socket on the rear of the
    CXR.
    Go to your computer/tablet and click on the Wi-Fi/network logo and select
    CXR.
    Use a web browser on your device to connect to http://10.10.10.10/



  • Page 17

    Cambridge Audio is a brand of Audio Partnership Plc
    Registered Office: Gallery Court, Hankey Place
    London SE1 4BB, United Kingdom
    Registered in England No. 2953313

    © 2016 Cambridge Audio Ltd

    AP33863/3-A

    www.cambridgeaudio.com






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cambridge Audio Topaz SR20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Cambridge Audio Topaz SR20 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 6,69 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Cambridge Audio Topaz SR20

Cambridge Audio Topaz SR20 Bedienungsanleitung - Deutsch - 13 seiten

Cambridge Audio Topaz SR20 Bedienungsanleitung - Holländisch - 13 seiten

Cambridge Audio Topaz SR20 Bedienungsanleitung - Französisch - 13 seiten

Cambridge Audio Topaz SR20 Bedienungsanleitung - Italienisch - 13 seiten

Cambridge Audio Topaz SR20 Bedienungsanleitung - Spanisch - 13 seiten

Cambridge Audio Topaz SR20 Bedienungsanleitung - Polnisch - 13 seiten

Cambridge Audio Topaz SR20 Bedienungsanleitung - Schwedisch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info